DOI QR코드

DOI QR Code

Slenderness limit for SSTT-confined HSC column

  • Khun, Ma Chau (Faculty of Civil Engineering, University Technology Malaysia) ;
  • Awang, Abdullah Zawawi (Faculty of Civil Engineering, University Technology Malaysia) ;
  • Omar, Wahid (Faculty of Civil Engineering, University Technology Malaysia)
  • 투고 : 2013.05.13
  • 심사 : 2014.02.25
  • 발행 : 2014.04.25

초록

Due to the confinement effects, Steel-Straps Tensioning Technique (SSTT) can significantly enhance the strength and ductility of high-strength concrete (HSC) members (Moghaddam et al. 2008). However, the enhancement especially in strength may result in slender member and more susceptible to instability (Jiang and Teng 2012a). This instability is particularly significant in HSC member as it inherent the brittle nature of the material (Galano et al. 2008). The current slenderness limit expression used in the design is mainly derived from the experiment and analysis results based on Normal strength concrete (NSC) column and therefore the direct application of these slenderness limit expressions to the HSC column is being questioned. Besides, a particular slenderness limit for the SSTT-confined HSC column which incorporated the pre-tensioned force and multilayers effects is not yet available. Hence, an analytical study was carried out in the view of developing a simple equation in order to determine the slenderness limit for HSC column confined with SSTT. Based on the analytical results, it was concluded that the existing slenderness limit expressions used in the design are appropriate for neither HSC columns nor SSTT-confined HSC columns. In this paper, a slenderness limit expression which has incorporated the SSTT-confinement effects is proposed. The proposed expression can also be applied to unconfined HSC columns.

키워드

참고문헌

  1. Awang, A.Z (2013), "Stress-strain behavior of high-strength concrete with lateral pre-tensioning confinement", Ph.D. Dissertation, Universiti Teknologi Malaysia, Malaysia.
  2. American Concrete Institue (ACI) (2008), "Design and construction of externally bonded FRP system for strengthening concrete structures", ACI 440.2R-08, American Concrete Institute.
  3. Chuang, P.H. and Kong, F.K (1997), "Large-scale tests on slender, reinforced concrete columns", Struct. Eng., 75(23-24), 410-416.
  4. Concrete Society (2004), "Design guidance for strengthening concrete structures with fibre composite material", 2nd Edition, Concrete Society Technical Report No. 55, Crowthorne, Berkshire, UK.
  5. fib (2001), "Externally bonded FRP reinforcement for RC structures", The International Federation for Structural Concrete, Lausanne, Switzerland.
  6. Fitzwilliam, J. and Bisby, L.A. (2012), "Slenderness effects on circular CFRP-wrapped reinforced concrete columns", J. Compos. Construc., 14(3), 280-288.
  7. Galano, L. and Vignoli, A. (2008), "Strength and ductility of HSC and SCC slender columns subjected to short-term eccentric load", ACI Struct. J., 105(3), 259-69.
  8. Jiang, T. (2008), "FRP-confined RC columns: analysis, behavior and design", Ph.D Dissertation, Hong Kong Polytechnic University, Hong Kong, China.
  9. Jiang, T. and Teng, J.G. (2012a), "Slenderness limit for short FRP-confined circular RC columns", J. Compos. Construct., 16(6), 650 -660. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000293
  10. Jiang, T. and Teng, J.G. (2012b), "Behavior and design of slender FRP-confined circular RC columns", J. Compos. Construct., doi: 10.1061/(ASCE)CC.1943-5614.0000333.
  11. Kim, S.J. (2008), "Behavior of high-strength concrete columns", Ph.D Dissertation, North Carolina State University, Raleigh, North Carolina.
  12. Mirmiran, A., Shahawy, M. and Beitleman, T. (2001a), "Slenderness limit for hybrid FRP-concrete columns", Journal of Composites for Construction, 5(1), 26-34. https://doi.org/10.1061/(ASCE)1090-0268(2001)5:1(26)
  13. Moghaddam, H., Pilakoutas, K., Samadi, M. and Mohebbi., S. (2008), "Strength and ductility of concrete member confined by external post-tensioned strips", The 4th National Conference on Civil Engineering, University of Tehran, Tehran.
  14. Newmark, N.M. (1943), "Numerical procedure for computing deflections, moments, and buckling loads", ASCE Tran., 108, 1161-1234.
  15. Tamuzs, V., Tepfers, R., Zile, E. and Valdmanis, V. (2007), "Stability of round concrete columns confined by composite wrappings", Mech. Compos. Mater., 45(3), 191-202.
  16. Xu, L. (2012), "Shape modification of square reinforced concrete columns confined with fibre-reinforced polymer and steel straps", Master of Engineering (Research) Dissertation, University of Wollongong.

피인용 문헌

  1. Dynamic simulation of unrestrained interlocking Tuned Liquid Damper blocks vol.144, 2017, https://doi.org/10.1016/j.conbuildmat.2017.03.190
  2. Artificial neural network models for FRP-repaired concrete subjected to pre-damaged effects 2017, https://doi.org/10.1007/s00521-017-3104-7