Journal of Welding and Joining

  • 제32권1호
  • /
  • Pages.15-21
  • /
  • 2014
  • /
  • 2466-2232(pISSN)
  • /
  • 2466-2100(eISSN)
대한용접접합학회 (The Korean Welding and Joining Society)
권호 표지
DOI QR코드

DOI QR Code

TMCP강을 적용한 해상용 풍력타워의 용접 공정에 따른 기계적 물성 평가

Evaluation on Mechanical Properties with Welding Processes for Off Shore Wind Tower Application

  • 지창욱 (부산대학교 재료공학과) ;
  • 최철영 (부산대학교 재료공학과) ;
  • 남대근 (한국생산기술연구원 동남권지역본부) ;
  • 김형찬 (한국생산기술연구원 동남권지역본부) ;
  • 장재호 (한국생산기술연구원 동남권지역본부) ;
  • 김기혁 (동국제강 중앙기술연구소 후판 연구팀) ;
  • 박영도 (동의대학교 신소재공학과)
  • Ji, Changwook (School of Materials Science and Engineering, Pusan National University) ;
  • Choi, Chul Young (School of Materials Science and Engineering, Pusan National University) ;
  • Nam, Dae-Geun (Dongnam Regional Division, Korea Institute of Industrial Technology) ;
  • Kim, Hyoung Chan (Dongnam Regional Division, Korea Institute of Industrial Technology) ;
  • Jang, Jae Ho (Dongnam Regional Division, Korea Institute of Industrial Technology) ;
  • Kim, Ki Hyuk (Plate Research Team and R&D Center, Dongkuk Steel) ;
  • Park, Yeong-Do (Department of Advanced Materials Engineering, Dong-Eui University)
  • 투고 : 2014.02.03
  • 심사 : 2014.02.24
  • 발행 : 2014.02.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

FCAW(Flux Cored Arc Welding), SAW(Submerged Arc Welding), EGW(Electro Gas Welding), and three-pole SAW are applicable in manufacturing the offshore wind tower. In this paper, mechanical properties of these welded-joints for TMCP steels were evaluated in all above welding processes. The tensile strength of welded-joints for all the welding methods satisfied the standard guideline (KS D 3515). No cracking on weldment was found after the bending test. Changes of weldedments hardness with welding processes were observed. In a weld HAZ (heat-affected zone), a softened HAZ-zone was formed with high heat input welding processes (SAW and EGW). However, the welded-joint fractures were found in the base metal for all cases and small decrease in welded-joint strength was caused by a softened zone. The multi-pole SAW welds exhibited similar mechanical properties comparing to the one with one-pole SAW process.

키워드

참고문헌

  1. S. O. Kim, H. W. Kim, C. B. Ko and N. H. Kyong : 2MW Offshore Wind Turbine Construction, Journal of KWEA. 2-2 (2011), 3-9
  2. Y. D. Choi, S. W. Son, H. C. Jang and N. J. Choi : Design and Structure Analysis of a Tower Service Lift for Offshore Wind Power System, Journal of KSME. 36-1 (2012), 101-108 https://doi.org/10.5916/jkosme.2012.36.1.101
  3. M. S. Jang and H. J. Bang : The Current Status and the Prospects of Wind Energy, Journal of the Environmental Sciences. 18-8 (2009), 933-940 https://doi.org/10.5322/JES.2009.18.8.933
  4. I. W. Han, Y. H. Park, G. B. An and Y. H. An : Development Trends of Steel Plates for Ship Building and Off-Shore Construction and It's Weldability, Journal of KWJS. 27-1 (2009), 25-33 (in Korean)
  5. H. J. Kim and J. G. Youn : A Study on the Fatigue Characteristics of Accelerated Cooled TMCP Steel's Welded Joint with High Heat Input, Journal of KWS. 6-1 (1988), 28-34 (in Korean)
  6. H. J. Kim : TMCP강의 개발 및 적용, Journal of KWS. 4-2 (1986), 1-11 (in Korean)