DOI QR코드

DOI QR Code

Experimental study of bearing capacity of strip footing on sand slope reinforced with tire chips

  • 투고 : 2012.12.14
  • 심사 : 2013.10.23
  • 발행 : 2014.03.25

초록

Tire chips and tire chips-soil mixtures can be used as alternative fill material in many civil engineering applications. In this study, the potential benefits of using tire chips as lightweight material to improve the bearing capacity and the settlement behavior of sand slope was investigated experimentally. For this aim, a series of direct shear and model loading tests were conducted. In direct shear tests, the effect of contents of the tire chips on the shear strength parameters of sand was investigated. Different mixing ratios of 0, 5, 10, 15 and 20% by volume were used and the optimum mixing ratio was obtained. Then, laboratory model tests were performed on a model strip footing on sand slope reinforced with randomly distributed tire chips. The loading tests were carried out on sand slope with relative density of 65% and the slope angle of $30^{\circ}C$. In the loading tests the percentage of tire chips to sand was taken as same as in direct shear tests. The results indicated that at the same loading level the settlement of strip footing on sand-tire chips mixture was about 30% less than in the case of pure sand. Addition of tire chips to sand increases BCR (bearing capacity ratio) from 1.17 to 1.88 with respect to tire chips content. The maximum BCR is attained at tire chips content of 10%.

키워드

참고문헌

  1. Abdrabbo, F.M., Abouseeda, H.M., Gaaver, K.E. and El-Marassi, M.A. (2005), "Behavior of strip footings resting on sand reinforced with tire-chips", Slopes and Retaining Structures under Seismic and Static Conditions (GSP 140) Part of Geo-Frontiers 2005 Proceedings of the Sessions of the Geo-Frontiers Congress, Austin, Texas, USA, January.
  2. Ahmed, I. (1993), "Laboratory study on properties of rubber soils", Report No. FHWA/IN/JHRP-93/4, Purdue University, West Lafayette, Indianapolis, IN, USA.
  3. ASTM D3080 (1985), Standard test method for direct shear test of soils under consolidated drained conditions, American Society for Testing and Materials, Philadelphia, PA, USA.
  4. Attom, M.F. (2006), "The use of shredded waste tires to improve the geotechnical engineering properties of sands", Environ. Geol., 49(4), 497-503. https://doi.org/10.1007/s00254-005-0003-5
  5. Edil, T. and Bosscher, P.J. (1994), "Engineering properties of tire chips and soil mixtures", Geotech. Test. J., ASTM, 14(4), 453-464.
  6. Edincliler, A., Baykal, G. and Dengili, K. (2004), "Determination of static and dynamic behaviour of waste materials", Resour. Conserv. Recy., 42(3), 223-237. https://doi.org/10.1016/j.resconrec.2004.04.003
  7. Foose, G.J., Benson, C.H. and Bosscher, P.J. (1996), "Sand reinforced with shredded waste tires", J. Geotech. Eng., ASCE, 122(9), 760-767. https://doi.org/10.1061/(ASCE)0733-9410(1996)122:9(760)
  8. Ghazavi, M. and Sakhi, M.A. (2005), "Influence of optimized tire shreds on shear strength parameters of sand", Int. J. Geomech., 5(1), 58-65. https://doi.org/10.1061/(ASCE)1532-3641(2005)5:1(58)
  9. Gudio, V.A. and Christou, S.N. (1988), "Bearing capacity and settlement characteristics of Geowebreinforced earth slabs", Proceedings of the ASCE, Spring Meeting, Nashville, TN, USA, 21-36.
  10. Guleria, S.P. and Dutta, R.K. (2012), "Behaviour of fly ash-lime-gypsum composite mixed with treated tire chips", Geomech. Eng., Int. J., 4(3), 151-171.
  11. Hataf, N. and Rahimi, M. (2006), "Experimental investigation of bearing capacity of sand reinforced with randomly distributed tire shreds", Constr. Build. Mater., 20(10), 910-916. https://doi.org/10.1016/j.conbuildmat.2005.06.019
  12. Humphrey, D., Sandford, T., Cribbs, M. and Manison, W. (1993), "Shear strength and compressibility of tire chips for use as retaining wall backfill", Transport. Res. Rec., No. 1422, 29-35.
  13. Lee, J.H., Salgado, R., Bernal, A. and Lovell, C.W. (1999), "Shredded tires and rubber-sand as lightweight backfill", J. Geotechnol. Geoenviron., 125(2), 132-141. https://doi.org/10.1061/(ASCE)1090-0241(1999)125:2(132)
  14. Tafreshi, S.N.M. and Norouzi, A.H. (2012), "Bearing capacity of a square model footing on sand reinforced with shredded tire - An experimental investigation", Constr. Build. Mater., 35, 910-916.
  15. Tatlisoz, N., Edil, T.B. and Benson, C. (1998), "Interaction between reinforcing geosynthetics and soil-tire chip mixtures", J. Geotechn. Geoenviron., ASCE, 124(11), 1109-1119. https://doi.org/10.1061/(ASCE)1090-0241(1998)124:11(1109)
  16. Wu, W.Y., Benda, C.C. and Cauley, R.F. (1997), "Triaxial determination of shear strength of tire chips", J. Geotech. Geoenviron., ASCE, 123(5), 479-482. https://doi.org/10.1061/(ASCE)1090-0241(1997)123:5(479)
  17. Yoon, Y.W., Cheon, S.H. and Kang, D.S. (2004), "Bearing capacity and settlement of tire-reinforced sands", Geotext. Geomembr., 22(5), 439-453. https://doi.org/10.1016/j.geotexmem.2003.12.002
  18. Zornberg, J.G., Alexandre, R.C. and Viratjandr, C. (2004), "Behaviour of tire shred-sand mixtures", Can. Geotech. J., 41(2), 227-241. https://doi.org/10.1139/t03-086

피인용 문헌

  1. Application of waste rubber to reduce the settlement of road embankment vol.9, pp.2, 2015, https://doi.org/10.12989/gae.2015.9.2.219
  2. Dynamic Properties of Saturated Sands Mixed with Tyre Powders and Tyre Shreds 2016, https://doi.org/10.1007/s40999-016-0136-9
  3. Experimental and numerical investigation of footing behaviour on multi-layered rubber-reinforced soil 2016, https://doi.org/10.1080/19648189.2016.1262288
  4. Probabilistic bearing capacity of strip footing on reinforced anisotropic soil slope vol.23, pp.1, 2020, https://doi.org/10.12989/gae.2020.23.1.015
  5. Passive earth pressure for retaining structure considering unsaturation and change of effective unit weight of backfill vol.23, pp.3, 2014, https://doi.org/10.12989/gae.2020.23.3.207
  6. Strength and deformation behaviour of sand-rubber mixture vol.15, pp.9, 2014, https://doi.org/10.1080/19386362.2020.1812193