DOI QR코드

DOI QR Code

Fracture property of steel fiber reinforced concrete at early age

  • Fu, Chuan-Qing (College of Civil Engineering and Architecture, Zhejiang University of Technology) ;
  • Ma, Qin-Yong (College of Civil Engineering and Architecture, Anhui University of Science and Technology) ;
  • Jin, Xian-Yu (College of Civil Engineering and Architecture, Zhejiang University) ;
  • Shah, A.A. (Department of Civil Engineering, Sarhad University of Science and Information Technology) ;
  • Tian, Ye (College of Civil Engineering and Architecture, Zhejiang University)
  • 투고 : 2011.09.06
  • 심사 : 2013.09.18
  • 발행 : 2014.01.25

초록

This research is focused on obtaining the fracture property of steel fiber reinforced concrete(SFRC) specimens at early ages of 1, 2, 3 and 7-day, respectively. For this purpose, three point bending tests of nine groups of SFRC beams with notch of 40mm depth and different steel fiber ratios were conducted. The experimental results of early age specimens were compared with the 28-day hardened SFRC specimens. The test results indicated that the steel fiber ratios and curing age significantly influenced the fracture properties of SFRC. A reasonable addition of steel fiber improved the fracture toughness of SFRC, while the fracture energy of SFRC developed with curing age. Moreover, a quadratic relationship between splitting strength and fracture toughness was established based on the experiment results. Additionally, afinite element (FE) method was used to investigate the fracture properties of SFRC.A comparison between the FE analysis and experiment results was also made. The numerical analysis fitted well with the test results, and further details on the failure behaviors of SFRC could be revealed by the suggested numerical simulation method.

키워드

참고문헌

  1. Aggelis, D.G., Soulioti, D.V., Sapouridis, N., Barkoula, N.M., Paipetis, A.S. and Matikas, T.E. (2011), "Acoustic emission characterization of the fracture process in fiberreinforced concrete", Constr. Build Mater., 25,4126-4131. https://doi.org/10.1016/j.conbuildmat.2011.04.049
  2. Bencardino, F., Rizzuti, L., Spadea, G. and Swamy, R.N. (2010), "Experimental evaluation of fiber reinforced concrete fracture properties", Compos. Part B: Eng., 41(1), 17-24. https://doi.org/10.1016/j.compositesb.2009.09.002
  3. Caggiano, A., Cremona, M. and Faella, C. (2012), "Fracture behavior of concrete beams reinforced with mixed long/short steel fibers", Constr. Build Mater., 37, 832-840. https://doi.org/10.1016/j.conbuildmat.2012.07.060
  4. Carpinteri, A. and Brighenti, R. (2010), "Fracture behaviour of plain and fiber-reinforced concrete with different water content under mixed mode loading", Mater. Des., 31(4), 2032-2042. https://doi.org/10.1016/j.matdes.2009.10.021
  5. Juarez, C., Pedro,Valdez, P., Duran, A. and Sobolev, K.(2007), "The diagonal tension behavior of fiber reinforced concrete beams", Cement Concrete Compos., 29(5), 402-408. https://doi.org/10.1016/j.cemconcomp.2006.12.009
  6. Chalioris, C.E. and Karayannis, C.G. (2009), "Effectiveness of the use of steel fibers on the torsional behavior of flanged concrete beams", Cement Concrete Compos., 31, 331-341. https://doi.org/10.1016/j.cemconcomp.2009.02.007
  7. Han, R., Zhao, S.B. and Qu, F.L. (2006), "Experimental study on the tensile performance of steel fiber reinforced concrete", China Civil Eng. J., 39(11), 63-67.
  8. Jin, N.G., Tian, Y. and Jin, X.Y. (2007), "Numerical simulation of fracture and damage behaviour of young concrete", Comput. Concr., 4(3), 221-234. https://doi.org/10.12989/cac.2007.4.3.221
  9. Koksal, F., Eyyubov, C. and Ozcan, D.M.(2002), "Effect of steel fiber volume fraction on mechanical properties of concrete", In: 5th International congress on advances in civil engineering, Istanbul, Turkey, 169-179.
  10. Kurihara, N., Kunieda, M., Kamada, T., Uchidab, Y. and Rokugob, K. (2000), "Tension softening diagrams and evaluation of properties of steel fiber reinforced concrete", Eng. Fract. Mech., 65(2-3), 235-245. https://doi.org/10.1016/S0013-7944(99)00116-2
  11. Li, Z., Li, F., Chang, T.Y.P. and Mai, Y.W. (1998), "Uniaxial tensile behavior of concrete reinforced with randomly distributed short fibers", ACI Mater. J., 95(5), 564-574.
  12. Lim, T.Y., Paramasivam, P. and Lee, S.L., (1987), "Analytical model for tensile behavior of steel-fiber concrete", ACI Mater. J., 84(8), 286-298.
  13. Luccioni, B., Ruano, G., Isla, F., Zerbino, R. and Giaccio, G. (2012), "A simple approach to model SFRC", Constr. Build Mater., 37, 111-124. https://doi.org/10.1016/j.conbuildmat.2012.07.027
  14. Michels, J., Christen, R. and Waldmann, D. (2013), "Experimental and numerical investigation on postcrackingbehavior of steel fiber reinforced concrete", Eng. Fract. Mech., 98,326-349. https://doi.org/10.1016/j.engfracmech.2012.11.004
  15. Mohammadi, Y., Singh, S.P. and Kaushik, S.K. (2008), "Properties of steel fibrous concretecontaining mixed fibers in fresh and hardened state", Constr. Build Mater., 22, 956-965. https://doi.org/10.1016/j.conbuildmat.2006.12.004
  16. Olivito, R.S. and Zuccarello, F.A. (2010), "An experimental study on the tensile strength of steel fiber reinforced concrete", Composites Part B: Eng., 41(3), 246-255. https://doi.org/10.1016/j.compositesb.2009.12.003
  17. Pereira, E.N.B., Barros, J.A.O., and Camoes, A. (2008), "Steel fiber-reinforced self-compacting concrete: experimental research and numerical simulation", J. Struct. Eng., 134(8), 1310-1321. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:8(1310)
  18. Qian, C.X. and Indubhushan, P. (1999), "Properties of high-strength steel fiber-reinforced concrete beams in bending", Cement Concrete Comp., 21(1), 73-81. https://doi.org/10.1016/S0958-9465(98)00040-7
  19. Shah, S.P. (1991), "Do fibers increase the tensile strength of cement-based matrixes", ACI Mater. J., 88(6), 595-602.
  20. Shah, A.A. and Ribakov, Y. (2011a), "Recent trends in steel fiberd high strength concrete", Mater. Des., 32, 4122-4151. https://doi.org/10.1016/j.matdes.2011.03.030
  21. Shah, A.A., Alsayed, S.H., Abbas, H., and Al-Salloum, Y.A. (2012), "Predicting residual strength of non-linear ultrasonically evaluated damaged concrete using artificial neural network", Constr. Build Mater., 29(1), 42-50. https://doi.org/10.1016/j.conbuildmat.2011.10.038
  22. Shah, A.A., Ribakov, Y., (2011b), "Estimation of RC slab-column joints effective strength using neural networks", Lat. Am. J. Solid Strurct., 8(4), 393-411. https://doi.org/10.1590/S1679-78252011000400002
  23. Shah, A.A. andRibakov, Y. (2010), "Effectiveness of nonlinear ultrasonic and acoustic emission evaluation of concrete with distributed damages", Mater. Des., 31(8), 3777-3784. https://doi.org/10.1016/j.matdes.2010.03.020
  24. Shah, A.A., Ribakov, Y., and Zhang, C.H. (2013), "Efficiency and sensitivity of linear and non-linear ultrasonic techniques to identifying micro and macro scale defects in concrete", Mater. Des., 50(6), 905-1016. https://doi.org/10.1016/j.matdes.2013.03.079
  25. Shah, A.A. and Hirose, S. (2010), "Nonlinear ultrasonic investigation of concrete damaged under uniaxial compression step loading", J. Mater. Civil Eng, 22(5), 476-484. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000050
  26. Soulioti, D., Barkoula, N.M., Paipetis, A.,Matikas, T.E., Shiotani, T. and Aggelis, D.G. (2009), "Acoustic emission behavior of steel fiber reinforced concrete under bending", Constr. Build Mater., 23(12), 3532-3536. https://doi.org/10.1016/j.conbuildmat.2009.06.042
  27. Teng, T.L., Chu, Y.A., Chang, F.A., Shen, B.C. and Cheng, D.S. (2008), "Development and validation ofnumerical model of steel fiber reinforced concrete for high-velocity impact", Comp. Mater. Sci., 42(1), 90-99. https://doi.org/10.1016/j.commatsci.2007.06.013
  28. Uygunoqlu, T. (2008), "Investigation of microstructure and flexural behavior of steel-fiber reinforced concrete", Mater. Struct., 41(8), 1441-1449. https://doi.org/10.1617/s11527-007-9341-y
  29. Wang, Z.L., Wu, J. and Wang, J.G. (2010), "Experimental and numerical analysis on effect of fiber aspect ratio on mechanical properties of SFRC", Constr. Build Mater., 24, 559-565. https://doi.org/10.1016/j.conbuildmat.2009.09.009
  30. Wang, Q.S., Li, X.B.,Zhao, G.Y., Shao, P. and Yao, J.R. (2008), "Experiment on mechanical properties of steel fiber reinforced concrete and application in deep underground engineering", J. China Univ. Mining. Technol., 18(1), 64-66. https://doi.org/10.1016/S1006-1266(08)60014-0
  31. Yazici, S., Inan, G. and Tabak, V. (2007), "Effect of aspect ratio and volume fraction of steel fiber on the mechanical properties of SFRC", Constr. Build Mater., 21(6), 1250-1253. https://doi.org/10.1016/j.conbuildmat.2006.05.025
  32. Zhang, J., Stang, H. and Li, V.C. (2001), "Crack bridging model for fiber reinforced concrete under fatigue tension", Int. J. Fatigue., 23(8), 655-670. https://doi.org/10.1016/S0142-1123(01)00041-X

피인용 문헌

  1. A reaction-diffusion modeling of carbonation process in self-compacting concrete vol.15, pp.5, 2015, https://doi.org/10.12989/cac.2015.15.5.847
  2. Acoustic emission characterization of the fracture process in steel fiber reinforced concrete vol.18, pp.6, 2016, https://doi.org/10.12989/cac.2016.18.6.921
  3. Fiber-Reinforced Concrete with Application in Civil Engineering vol.2018, pp.1687-8094, 2018, https://doi.org/10.1155/2018/1698905
  4. Acoustic emission characterization of the fracture process in steel fiber reinforced concrete vol.18, pp.4, 2014, https://doi.org/10.12989/cac.2016.18.4.923
  5. Influence of nano-silica on the failure mechanism of concrete specimens vol.19, pp.4, 2014, https://doi.org/10.12989/cac.2017.19.4.429
  6. Contribution of steel fiber as reinforcement to the properties of cement-based concrete: A review vol.20, pp.2, 2014, https://doi.org/10.12989/cac.2017.20.2.155
  7. Flexural analysis of steel fibre-reinforced concrete members vol.22, pp.1, 2014, https://doi.org/10.12989/cac.2018.22.1.011
  8. Influence of pre-compression on crack propagation in steel fiber reinforced concrete vol.11, pp.3, 2021, https://doi.org/10.12989/acc.2021.11.3.261