Structural Engineering and Mechanics

  • 제49권5호
  • /
  • Pages.569-595
  • /
  • 2014
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Post-buckling finite strip analysis of thick functionally graded plates

  • Hajikazemi, M. (Aerospace Engineering Department and Center of Excellence in Computational Aerospace Engineering, Amirkabir University of Technology) ;
  • Ovesy, H.R. (Aerospace Engineering Department and Center of Excellence in Computational Aerospace Engineering, Amirkabir University of Technology) ;
  • Assaee, H. (Mechanical & Aerospace Engineering Department, Shiraz University of Technology) ;
  • Sadr, M.H. (Aerospace Engineering Department and Center of Excellence in Computational Aerospace Engineering, Amirkabir University of Technology)
  • 투고 : 2013.09.26
  • 심사 : 2014.01.12
  • 발행 : 2014.03.10
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, a novel semi-energy finite strip method (FSM) is developed based on the concept of first order shear deformation theory (FSDT) in order to attempt the post-buckling solution for thin and relatively thick functionally graded (FG) plates under uniform end-shortening. In order to study the effects of through-the-thickness shear stresses on the post-buckling behavior of FG plates, two previously developed finite strip methods, i.e., semi-energy FSM based on the concept of classical laminated plate theory (CLPT) and a CLPT full-energy FSM, are also implemented. Moreover, the effects of aspect ratio on initial post-buckling stiffness of FG rectangular plates are studied. It has been shown that the variation of the ratio of initial post-buckling stiffness to pre-buckling stiffness ($S^*/S$) with respect to aspects ratios is quite independent of volume fractions of constituents in thin FG plates. It has also been seen that the universal curve representing the variation of ($S^*/S$) with aspect ratio of a FG plate demonstrate a saw shape curve. Moreover, it is revealed that for the thin FG plates in contrast to relatively thick plates, the variations of non-dimensional load versus end-shortening is independent of ceramic-metal volume fraction index. This means that the post-buckling behavior of thin FG plates and the thin pure isotropic plates is similar. The results are discussed in detail and compared with those obtained from finite element method (FEM) of analysis. The study of the results may have a great influence in design of FG plates encountering post-buckling behavior.

키워드

참고문헌

  1. Allen, H.G. and Bulson, P.S. (1980), Background to buckling, McGraw-Hill, London.
  2. Anandrao, K.S., Gupta, R.K., Ramchandran, P. and Venkateswara Rao, G. (2010), "Thermal post-buckling analysis of uniform slender functionally graded material beams", Struct. Eng. Mech., 36(5), 545-560. https://doi.org/10.12989/sem.2010.36.5.545
  3. Anandrao, K.S., Gupta, R.K., Ramchandran, P. and Venkateswara Rao, G. (2012), "Non-linear free vibrations and post-buckling analysis of shear flexible functionally graded beams", Struct. Eng. Mech., 44(3), 339-361. https://doi.org/10.12989/sem.2012.44.3.339
  4. Assaee, H. and Ovesy, H.R. (2007), "A multi-term semi-energy finite strip method for post-buckling analysis of composite plates", Int. J. Numer. Meth. Eng., 70(11), 1303-1323. https://doi.org/10.1002/nme.1917
  5. Assaee, H. and Ovesy, H.R. (2008), "Semi-energy finite strip post-buckling analysis of anti-symmetric cross-ply laminated plates concerning the effects of mechanical coupling", Proceedings of the Fifth International Conference on Thin-Walled Structures, Brisbane, Australia.
  6. Assaee, H., Ovesy, H.R., Hajikazemi, M. and Sadr Lahidjani, M.H. (2010), "The Effects of Aspect Ratio on Post-buckling Behavior of Rectangular Plates of Functionally Graded Materials", Proceedings of the Tenth International Conference on Computational Structures Technology, Eds. B.H.V. Topping, J.M. Adam, F.J. Pallares, R. Bru, M.L. Romero, Civil-Comp Press, Stirlingshire, UK.
  7. Assaee, H., Hajikazemi, M. and Ovesy, H.R. (2012), "The effect of anisotropy on post-buckling behavior of laminated plates using semi energy finite strip method", Compos. Struct., 94(5),1880-1885. https://doi.org/10.1016/j.compstruct.2012.01.011
  8. Chai, G.B. (1989), "The effct of geometry and prescribed delaminations on the post-buckling behavior of laminated carbon-fiber reinforced plastic panels", PhD Thesis, University of Strathclyde.
  9. Cheung, Y.K. (1976), Finite strip method in structural analysis, Pergamon Press, Oxford.
  10. Cuong, B.H. (2013), "Buckling of thin-walled members analyzed by Mindlin-Reissner finite strip", Struct. Eng. Mech., 48(1), 77-91. https://doi.org/10.12989/sem.2013.48.1.077
  11. Dawe, D.J. (2002), "Use of the finite strip method in predicting the behavior of composite laminated structures", Compos. Struct., 57(1-4), 11-36. https://doi.org/10.1016/S0263-8223(02)00059-4
  12. GhannadPour, S.A.M and Alinia, M.M. (2006), "Large deflection behavior of functionally graded plates under pressure loads", Compos. Struct., 75(1-4), 67-71. https://doi.org/10.1016/j.compstruct.2006.04.004
  13. Hancock, G.J. (1981), "Nonlinear analysis of thin sections in compression", J. Struct. Div., ASCE, 107(3), 455-471.
  14. Kasaeian, S.H., Azhari, M., Heidarpour, A. and Hajiannia, A. (2011), "Inelastic local buckling of curved plates with or without thickness-tapered sections using finite strip method", Int. J. Steel Struct., 12(3), 427-442.
  15. Kocaturk, T. and Akbas, S.D. (2012), "Post-buckling analysis of Timoshenko beams made of functionally graded material under thermal loading", Struct. Eng. Mech., 41(6), 775-789. https://doi.org/10.12989/sem.2012.41.6.775
  16. Koizumi, M. (1997), "FGM activities in Japan", Compos. Part B Eng., 28(1), 1-4.
  17. Leissa, A.W. (1986), "Conditions for laminated plates to remain flat under inplane loading", Compo. Struct., 6(4), 261-270. https://doi.org/10.1016/0263-8223(86)90022-X
  18. Markworth, A.J., Ramesh, K.S. and Parks, J.R. (1995), "Modeling studies applied to functionally graded materials", J. Mater. Sci., 30(9), 2183-2193. https://doi.org/10.1007/BF01184560
  19. Marguerre, K. (1937), "The Apparent Width of Plates in Compression", NACA-TM-833.
  20. Ovesy, H.R., Loughlan, J. and GhannadPour, S.A.M. (2006), "Geometric non-linear analysis of channel sections under end shortening, using different versions of the finite strip method", Comput. Struct., 84(13-14), 855-872. https://doi.org/10.1016/j.compstruc.2006.02.010
  21. Ovesy, H.R. and Ghannadpour, S.A.M. (2007), "Large deflection finite strip analysis of functionally graded plates under pressure loads", Int. J. Struct. Stab. Dyn., 7(2), 193-211. https://doi.org/10.1142/S0219455407002241
  22. Ovesy, H.R. and Assaee, H. (2009), "Semi-energy finite strip post-buckling analysis of laminated plates concerning the effects of mechanical coupling", Compos. Struct., 89(1), 120-125. https://doi.org/10.1016/j.compstruct.2008.07.019
  23. Ovesy, H.R., Assaee, H. and Hajikazemi, M. (2009), "An investigation on post-buckling behavior of functionally graded plate using a semi energy finite strip approach", Proceeding of the IJSSD Symposium on Progress in Structural Stability and Dynamics, Hong Kong.
  24. Ovesy, H.R. and Ghannadpour, S.A.M. (2009), "An exact finite strip for the calculation of relative postbuckling stiffness of isotropic plates", Struct. Eng. Mech., 31(2), 181-210. https://doi.org/10.12989/sem.2009.31.2.181
  25. Ovesy, H.R., Assaee, H. and Hajikazemi, M. (2011), "Post-buckling of thick symmetric laminated plates under end-shortening and normal pressure using semi-energy finite strip method", Comput. Struct., 89(9-10), 724-732. https://doi.org/10.1016/j.compstruc.2011.02.015
  26. Ovesy, H.R., Hajikazemi, M. and Assaee, H. (2012), "A novel semi energy finite strip method for postbuckling analysis of relatively thick anti-symmetric laminated plates", Adv. Eng. Soft., 48, 32-39. https://doi.org/10.1016/j.advengsoft.2012.01.007
  27. Pham, C.H. and Hancock, G.J. (2013), "Shear buckling of channels using the semi-analytical and spline finite strip methods", J. Construct. Steel Res., 90, 42-48. https://doi.org/10.1016/j.jcsr.2013.07.019
  28. Praveen, G.N. and Reddy, J.N. (1998), "Nonlinear transient thermoelastic analysis of functionally graded ceramic-metal plates", Int. J. Solid. Struct., 35(33), 4457-4476. https://doi.org/10.1016/S0020-7683(97)00253-9
  29. Reddy, J.N. (2000), "Analysis of functionally graded plates", Int. J. Numer. Meth. Eng., 47,(1-3), 663-684. https://doi.org/10.1002/(SICI)1097-0207(20000110/30)47:1/3<663::AID-NME787>3.0.CO;2-8
  30. Rhodes, J. and Harvey. J.M. (1977), "Examination of plate post-buckling behaviour", J. Eng. Mech. Div., ASCE, 103(3), 461-478.
  31. Sadr, M.H., Hajikazemi, M. and Ramezani-Oliaee, M. (2011), "Large deflection behavior of relatively thick functionally graded plates under pressure loads using higher order shear deformation theory", Key Eng. Mater., 471-472, 709-714.
  32. Shen, S.H. (2009), Functionally graded materials: nonlinear analysis of plates and shells, CRC Press, Taylor & Francis Group.
  33. Sherafat. M.H., Ghannadpour, S.A.M. and Ovesy, H.R. (2013), "Pressure loading, end- shortening and through- thickness shearing effects on geometrically nonlinear response of composite laminated plates using higher order finite strip method", Struct. Eng. Mech., 45(5), 677-691. https://doi.org/10.12989/sem.2013.45.5.677
  34. Sridharan, S. and Graves-Smith, T.R. (1981), "Post-buckling analysis with finite strips", J. Eng. Mech. Div., ASCE, 107(5), 869-888.
  35. Suresh, S. and Mortensen, A. (1998), Fundamentals of functionally graded materials, Maney, London.
  36. Von-Karman, Th. (1910), Encyklopadie der mathematischen wissenschaften, IV4, Springer, Berlin.
  37. Woo, J. and Meguid, S.A. (2001), "Nonlinear analysis of functionally graded plates and shallow shells", Int. J. Solid. Struct., 38(42-43), 7409-7421. https://doi.org/10.1016/S0020-7683(01)00048-8
  38. Yang, J. and Shen, S.H. (2003), "Non-linear analysis of functionally graded plates under transverse and inplane loads", Int. J. Nonlin. Mech., 38(4), 467-482. https://doi.org/10.1016/S0020-7462(01)00070-1

피인용 문헌

  1. A Semi-Energy Finite Strip Method for Post-Buckling Analysis of Relatively Thick Anti-Symmetric Cross-Ply Laminates vol.471-472, pp.1662-9795, 2011, https://doi.org/10.4028/www.scientific.net/KEM.471-472.426
  2. A novel hyperbolic shear deformation theory for the mechanical buckling analysis of advanced composite plates resting on elastic foundations vol.30, pp.1, 2014, https://doi.org/10.12989/scs.2019.30.1.013
  3. An efficient finite strip procedure for initial post-buckling analysis of thin-walled members vol.90, pp.3, 2014, https://doi.org/10.1007/s00419-019-01627-9
  4. Nonlinear dynamic buckling analysis of imperfect viscoelastic composite laminated plates vol.79, pp.5, 2014, https://doi.org/10.12989/sem.2021.79.5.653