설비공학논문집 (Korean Journal of Air-Conditioning and Refrigeration Engineering)

  • 제26권1호
  • /
  • Pages.42-47
  • /
  • 2014
  • /
  • 1229-6422(pISSN)
  • /
  • 2465-7611(eISSN)
대한설비공학회 (The Society of Air-Conditioning and Refrigerating Engineers of Korea)
권호 표지
DOI QR코드

DOI QR Code

기화식 가습기에서 가습모듈 형상에 따른 가습효율의 수치해석 연구

Numerical Study on the Humidification Efficiency of Humidifying Module Shapes of the Evaporative Humidifier

  • Kim, H.K. (Department of Environmental Engineering, Hanbat National University) ;
  • Ohm, T.I. (Department of Environmental Engineering, Hanbat National University) ;
  • Moon, S.H. (Korea Institute of Energy Research) ;
  • Yoon, H.K. (Korea Institute of Energy Research) ;
  • Bang, K.Y. (AHTech)
  • 투고 : 2013.09.11
  • 심사 : 2013.11.15
  • 발행 : 2014.01.10
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Adequate relative humidity is needed in the common living space, for human health, and industrial space, for maintenance and efficiency. Evaporative humidifier systems generally have slow response tendencies of air loads, but relatively low initial investment and maintenance costs. Humidification efficiency in the evaporative humidifier is dependent mostly on the shapes and arrays of humidifying modules. So, we tried to apply the computational fluid dynamics to the evaporative humidifier systems, and studied the humidification efficiency of evaporative humidifiers, through the outlet air conditions.

키워드

참고문헌

  1. Park, S. T., Kim, J. C., Band, Y. S., Lee, T. J., and Wang J. Y., 2007, Evaporative humidifier(Evaporative air cooling humidifier), Proceeding of SAREK Summer Annual Conference(2007-6), SAREK, p. 148.
  2. Wetmaster, Products List, Japan, pp. 4-6.
  3. Sung, M. K., Kato Shinsuke, and Kim, M. S., 2011, Sterilization of evaporative humidifier in air handling unit for cleanroom using ultraviolet irradiation, Proceedings of the KIAEBS 2011 Autumn Annual Conference, KIAEBS, pp. 41-44.
  4. Yu, S., Kim, H., Lee, Y., Lee, S., Choi, W., and Ahn, K., 2008, A model of membrane humidifier for the residential power generation fuel cell, Proceeding of the KSME 2008 Thermal and Fluid Engineering Divisions Spring Annual Meeting, KSME, pp. 93-96.
  5. Lee, K.-B., 1992, Heat and mass transfer between hot waste gas and cold water in a direct contact heat exchanger, Transaction of KSME B, Vol. 16, No. 6, pp. 1171-1178.
  6. Ko, G. H., Son, S. Y., Ro, K. C., and Ryou, H. S., 2009, Numerical study on the liquid film formation and heat transfer of the impinging sprays on the hot surface, Proceeding of KSME 2009 Autumn Annual Meeting(2009. 11), pp. 1772-1777.
  7. Bae, H., Ahn, K. Y., Lee, Y. D., Kang, S. K., and Yu, S., 2011, Basic analysis of heat and mass transfer characteristics of tubular membrane humidifier for proton exchange membrane fuel cell, Transaction of KSME B, Vol. 35, No. 5, pp. 473-480. https://doi.org/10.3795/KSME-B.2011.35.5.473
  8. Kim, H. J., Ro, K. C., Ryou, H. S., and Hur, N., 2008, Development of a general purpose thermo/fluid flow analysis program NUFLEX with wall impingement and heat transfer analysis model of liquid film, Journal of KSCFE, Vol. 13, No. 2, pp. 68-72.
  9. ANSYS Inc., 2012, Theory Guide, pp. 589-602.
  10. Springer, T. E., Zawodzinski, T. A., and Gottesfeld, S. 1991, Polymer Electrolyte Fuel Cell Model, J. Electrochemical Soc, Vol. 138, No. 8, pp. 2334-2341. https://doi.org/10.1149/1.2085971
  11. Kumar, A., 2008, Use of Air Side Economizer for Data Center Thermal Management, Georgia Institute of Technology, p. 46.

피인용 문헌

  1. Recent Progress in Air-Conditioning and Refrigeration Research: A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2014 vol.27, pp.7, 2015, https://doi.org/10.6110/KJACR.2015.27.7.380