KSCE Journal of Civil and Environmental Engineering Research (대한토목학회논문집)

Korean Society of Civil Engeneers (대한토목학회)
권호 표지
DOI QR코드

DOI QR Code

Characteristics of Bond Behavior According to Confinement and Stiffness Ratios of External Confining Jackets

외부구속자켓의 구속비와 강도비에 따른 콘크리트 부착거동의 특성

  • Received : 2013.10.21
  • Accepted : 2013.11.11
  • Published : 2014.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study analyzes the characteristics of bond behavior of concrete, which is confined by external jackets such as shape memory alloy (SMA) and steel, according to confinement and stiffness ratios of the external jackets. For this purpose, SMA wires with 1.0 mm diameter and steel plates with 1.0 and 1.5 thickness are used to induce difference on confinement and stiffness ratios and, then, bond strength and behavior are analyzed considering the two factors. When external jakcets are used for the concrete cylinders, bond strengths of specimens increase and their bond failures are transferred from splitting failure to pull-out failure and, thus, the external jackets show confining effect. Bond strenght of concrete increase with increasing confinement and stiffness ratios of the external jackets. However, maximal circumferential strains decrease linearly with increasing the two values.

이 연구에서는 형상기억합금과 강재로 구속된 콘크리트의 부착응력을 외부자켓의 구속비 및 강도비를 이용하여 분석하였다. 이를 위해서 직경 1.0 mm 형상기억합금 와이어와 두께 1.0 mm와 1.5 mm 강판을 사용하여, 구속비 및 강도비의 차이를 유발하여 각 변수의 차이에 따른 부착강도 및 부착거동을 분석하였다. 외부자켓 구속에 의해서 콘크리트의 부착강도는 증가하였으며, 파괴형태도 쪼갬파괴에서 뽑힘파괴로 전환되어 구속효과가 있음을 알 수 있었다. 콘크리트 부착강도는 구속비와 강도비가 증가함에 따라 증가하는 현상을 보이지만, 특정 시점부터는 부착강도가 거의 증가하지 않고 일정한 값을 나타내는 결과를 보였다. 그러나 강도비의 증가에 따라 발생하는 원주방향 최대 변형율은 거의 선형적으로 감소하는 결과를 보였다.

Keywords

References

  1. ACI Committee 318. (2002). Building code requirements for structural concrete and commentary (ACI 318M-02), Michigan, American Concrete Institute.
  2. Andrawes, B., Shin, M. and Wierschem, N. (2010). "Active confining of reinforced concrete bridge columns using shape memory alloys." Journal of Bridge Engineering, Vol. 15, No. 1, pp. 81-89. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000038
  3. Choi, E., Chung, Y. S., Choi, D. H. and DesRoches, R. (2012). "Seismic protection of lap-spliced RC columns using SMA wire jackets." Magazine of Concrete Research, Vol. 64, No. 3, pp. 239-252. https://doi.org/10.1680/macr.10.00181
  4. Choi, E., Chung, Y. S., Choi, J. H., Kim, H. T. and Lee, H. (2010). "The confining effectiveness of NiTiNb and NiTi SMA wire jackets for concrete." Smart Materials and Structures, Vol. 19, 035024. https://doi.org/10.1088/0964-1726/19/3/035024
  5. Choi, E., Chung, Y. S., Kim, Y. W. and Kim, J. W. (2011). "Monotonic and cyclic bond behavior of confined concrete using NiTiNb SMA wires." Smart Materials and Structures, Vol. 20, 075016. https://doi.org/10.1088/0964-1726/20/7/075016
  6. Choi, E., Chung, Y. S., Park, K. and Jeon, J. S. (2013). "Effect of steel wrapping jackets on the bond strength of concrete and the lateral performance of circular RC columns." Engineering Structures, Vol. 48, pp. 43-54. https://doi.org/10.1016/j.engstruct.2012.08.026
  7. Choi, E., Park, J. Nam, T. H. and Yoon, S. J. (2006). "A new steel jacketing method for RC columns." Magazine of Concrete Research, Vol. 61, pp. 787-796.
  8. Lee, H., Choi, E., Cho, S. C. and Park, T. (2012). "Bond and splitting behavior of reinforced concrete confined by steel jackets without grouting." Magazine of Concrete Research, Vol. 64, No. 3, pp. 225-237. https://doi.org/10.1680/macr.2012.64.3.225
  9. Lundgren, K. (2000). "Pull-out tests of steel-encased specimens subjected to reversed cyclic loading." Material and Structures, Vol. 33, pp. 450-456. https://doi.org/10.1007/BF02480665
  10. Pantelides, C. P., Alameddine, F., Sardo, T. and Imbsen, R. (2004). "Seismic retrofit of state stress bridge on Interstate 80." Journal of Bridge Engineering, ASCE, Vol. 9, No. 4, pp. 333-342. https://doi.org/10.1061/(ASCE)1084-0702(2004)9:4(333)
  11. Pantelides, C. P., Duffin, J. B. and Reaveley, L. D. (2007). "Seismic strengthening of reinforced concrete multicolumn bridge piers." Earthquake Engineering, Vol. 23, No. 3, pp. 635-664.
  12. Park, J., Choi, E., Park, K. and Kim, H. T. (2011). "Comparison the cyclic behavor of concrete cylinders confined by shape memory alloy wire or steel jackets." Smart Materials and Structures, Vol. 20, 094008. https://doi.org/10.1088/0964-1726/20/9/094008
  13. Priestley, M. J. N., Seible, F. and Calvi, G. M. (1996). Seismic design and retrofit of bridges, Wiley, New York, NY, US.