DOI QR코드

DOI QR Code

상용 트럭의 공압 브레이크 제동 특성에 미치는 인자에 대한 연구

Analysis of the Effect of the Parameter on the Air Braking Response Time of Heavy duty Truck

  • 김진택 (전북대학교 기계시스템공학부) ;
  • 조병수 (군장대학교 자동차기계공학부) ;
  • 백병준 (전북대학교 기계시스템공학부)
  • Kim, Jin-Taek (Division of Mechanical System Engineering, Chonbuk National University) ;
  • Cho, Byoung-Soo (Division of Automotive-Mechanical Engineering, Kunjang University) ;
  • Baek, Byoung-Joon (Division of Mechanical System Engineering, Chonbuk National University)
  • 투고 : 2013.09.10
  • 심사 : 2014.01.09
  • 발행 : 2014.01.31

초록

상용 트럭에서 탑재하고 있는 공압을 이용하는 브레이크 시스템에서 제동시간을 최소화 하기 위해 다양한 인자들에 대한 연구를 진행하였다. 실험 결과와 1차원 유체유동 네트워크 해석코드(FLOWMASTER) 결과와 비교하기 위하여 실험 지그를 제작하였다. 밸브 포트, 파이프 길이, 주변의 열적 환경에 대한 영향에 대해 제동 응답 시간과 압력 감소를 고찰하였다. 또한 탱크 압력에 대한 압력 감소에 대해 상관관계식을 도출하였다.

The effect of several parameters to minimize the braking response time has been investigated in this study. The experimental rigs were developed and the results of the experement compared with those of simulation obtained from the net work fluid flow system analysis code (FLOWMASTER). The braking response time and pressure loss were observed at separated braking port and found out that the response time can be reduced by considering the pipe length and environmental thermal conditions. The correlation equation was also presented to predict the pressure loss at various tank pressure.

키워드

참고문헌

  1. F.Hecker, S.Hummel, O.Jundt, K.D.Leimbach, I.Faye, H.Schramm, "Vehicle Dynamics Control for Commercial Vehicles", SAE 973284, 1997 DOI: http://dx.doi.org/10.4271/973284
  2. S.V. Natarajan , S.C. Subramanian1, S. Darbha , K.R. Rajagopal, "A model of the relay valve used in an air brake system", Department of Mechanical Engineering, Texas A&M University, College Station, TX 77843, USA
  3. W.K.Park, L.H.Li, S.D.Mun, H.K.Lee, G.E.Yang, "The Study on the Performance of Air Brake Response", KSPE Spring Conference, pp. 1069-1070, 2010.
  4. M.Elwell, S.Kimbrough, "An Advenced Braking and Stability Controller for Tow-Vehicle and Trailer Combinatons", SAE 931878, 1993
  5. Myngwon Sug, Yoonki Park and Seongjin Kwon, "A Simulation Program for the Braking Characteristics of 8${\times}$4 vehicles", Transactions of Korea society of automotive engineers, Vol.9, No.6, pp.119-128, 2001.
  6. Limpert, R. "Brake Design and Safety", pp.233-239, Society of Automotive Engineers, 1992.
  7. Flowmaster International Ltd., Flowmaster Reference Help Version 7.7, 2011