한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제31권2호
  • /
  • Pages.119-123
  • /
  • 2014
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지
DOI QR코드

DOI QR Code

회전식 및 직선식 레이저 모듈 개발에 관한 연구

A Study on the Development of the Rotary and Linear Laser Modules

  • Sim, Min-Seop (School of Mechanical Engineering, Changwon National Univ.) ;
  • Hwang, Seong-Ju (School of Mechanical Engineering, Changwon National Univ.) ;
  • Kim, Dong-Hyeon (School of Mechanical Engineering, Changwon National Univ.) ;
  • Lee, Choon-Man (School of Mechanical Engineering, Changwon National Univ.)
  • 투고 : 2013.12.23
  • 심사 : 2014.01.16
  • 발행 : 2014.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Recently, laser processing technologies have been developed in many different industrial fields. The laser processing technologies are widely being applied such as laser assisted machining, cladding, heat treatment and coating. In the laser modules of the laser assisted machining system, laser lens is very important for accuracy and productivity of product. As the laser beam size, shape and focusing distance change, heat input energy of preheating point can be changed, the laser module of the laser assisted machining system should be equipped with various lenses differing beam size, beam shape and focusing distance. In this study, the rotary and linear laser modules are suggested. The finite element analysis is carried out to certify the static and dynamic stabilities of the developed laser modules. Finally, the rotary and linear laser modules have been fabricated successfully using the analysis results.

키워드

참고문헌

  1. Melkote, S., Kumar, M., Hashimoto, F., and Lahoti, G., "Laser Assisted Micro-Milling of Hard-To- Machine Materials," Journal of the CIRP, Vol. 58, No. 1, pp. 45-48, 2009. https://doi.org/10.1016/j.cirp.2009.03.053
  2. Kim, J. D., Lee, S. J., and Park, S. J., "The Basic Study on Machinability of Ceramics in CO2 Laser Assisted Machining," J. Korean Soc. Precis. Eng., Vol. 33, No. 2, pp. 322-329, 2009. https://doi.org/10.1016/j.precisioneng.2008.09.002
  3. Olgun, U. and Budak, E., "Machining of Difficult-to- Cut-Alloys Using Rotary Turning Tools," Journal of the CIRP, Vol. 8, pp. 81-87, 2013.
  4. Kim, D. H., Kim, K. S., and Lee, C. M., "Environment-friendly Machining Technology of Difficult-To-Cut Material," Journal of the KSME, Vol. 52, No. 2, pp. 43-47, 2012.
  5. Yilbas, B. S., "Laser Short-Pulse Heating : Moving Heat Source and Convective Boundary Considerations," Physica A: Statistical Mechanics and its Applications, Vol. 293, No. 1-2, pp. 157-177, 2011.
  6. Jeon, Y. H. and Lee, C. M., "Current Research Trend on Laser Assisted Machining," Int. J. Precis. Eng. Manuf., Vol. 13, No. 2, pp. 311-317, 2012. https://doi.org/10.1007/s12541-012-0040-4
  7. Lee, J. H., Shin, D. S., Suh, J., Cho, H. Y., and Kim, K. W., "Trends of Laser Integrated Machine," J. Korean Soc. Precis. Eng., Vol. 25, No. 9, pp. 20-26, 2008.
  8. Zhang, C. and Shin, Y. C., "A Novel Laser-Assisted Truing and Dressing Technique for Vitrified CBN Wheels," Int. J. Precis. Eng. Manuf., Vol. 42, No. 7, pp. 825-835, 2002.
  9. Kalyon, M. and Yilbas, B. S., "Laser Pulse Heating: a Formulation of Desired Temperature at the Surface," Optics and Lasers in Engineering, Vol. 39, No. 1, pp. 109-119, 2003. https://doi.org/10.1016/S0143-8166(02)00088-X
  10. Yang, B., Shen, X., and Lei, S., "Mechanisms of Edge Chipping in laser-Assisted Milling of Silicon Nitride Ceramics," International Journal of Machine Tools and Manufacture, Vol. 49, No. 3-4, pp. 344-350, 2009. https://doi.org/10.1016/j.ijmachtools.2008.09.006
  11. Ahn, S. H. and Lee, C. M., "A Study on Large-Area Laser Processing Analysis in Consideration of the Moving Heat Source," Int. J. Precis. Eng. Manuf., Vol. 12, No. 2, pp. 285-292, 2011. https://doi.org/10.1007/s12541-011-0038-3
  12. Rozzi, J. C., Pfefferkorn, F. E., Shin, Y. C., and Incropera, F. P., "Experimental Evaluation of the Laser Assisted Machining of Silicon Nitride Ceramics," Journal of Manufacturing Science and Engineering, Vol. 122, No. 4, pp. 666-670, 2000. https://doi.org/10.1115/1.1286556
  13. Kim, D. H., Cha, N. H., Kim, T. W., and Lee, C. M., "A Fundamental Study on the Design of Two-axis Drive Manipulator for Laser-assisted Machining," J. Korean Soc. Precis. Eng., Vol. 29, No. 8, pp. 813-817, 2012. https://doi.org/10.7736/KSPE.2012.29.8.813
  14. Kim, K. S., Kim, J. H., Choi, J. Y., and Lee, C. M., "A Review on Research and Development of Laser Assisted Turning," Int. J. Precis. Eng. Manuf., Vol. 12, No. 4, pp. 753-759, 2011. https://doi.org/10.1007/s12541-011-0100-1
  15. Nasim, H. and Jamil, Y., "Diode Lasers: From Laboratory to Industry," Optics & Laser Technology, Vol. 56, pp. 211-222, 2014. https://doi.org/10.1016/j.optlastec.2013.08.012
  16. Kim, D. H. and Lee, C. M., "The Static and Dynamic Analysis of a 45,000rpm Spindle for a Machine Tool and Evaluation of its Stiffness," J. Korean Soc. Precis. Eng., Vol. 28, No. 4, pp. 422-426, 2011.

피인용 문헌

  1. Study on Accuracy Evaluation of Laser Lens Changer for a Laser-Assisted Machining System vol.32, pp.8, 2015, https://doi.org/10.7736/KSPE.2015.32.8.687