References
- Melkote, S., Kumar, M., Hashimoto, F., and Lahoti, G., "Laser Assisted Micro-Milling of Hard-To- Machine Materials," Journal of the CIRP, Vol. 58, No. 1, pp. 45-48, 2009. https://doi.org/10.1016/j.cirp.2009.03.053
- Kim, J. D., Lee, S. J., and Park, S. J., "The Basic Study on Machinability of Ceramics in CO2 Laser Assisted Machining," J. Korean Soc. Precis. Eng., Vol. 33, No. 2, pp. 322-329, 2009. https://doi.org/10.1016/j.precisioneng.2008.09.002
- Olgun, U. and Budak, E., "Machining of Difficult-to- Cut-Alloys Using Rotary Turning Tools," Journal of the CIRP, Vol. 8, pp. 81-87, 2013.
- Kim, D. H., Kim, K. S., and Lee, C. M., "Environment-friendly Machining Technology of Difficult-To-Cut Material," Journal of the KSME, Vol. 52, No. 2, pp. 43-47, 2012.
- Yilbas, B. S., "Laser Short-Pulse Heating : Moving Heat Source and Convective Boundary Considerations," Physica A: Statistical Mechanics and its Applications, Vol. 293, No. 1-2, pp. 157-177, 2011.
- Jeon, Y. H. and Lee, C. M., "Current Research Trend on Laser Assisted Machining," Int. J. Precis. Eng. Manuf., Vol. 13, No. 2, pp. 311-317, 2012. https://doi.org/10.1007/s12541-012-0040-4
- Lee, J. H., Shin, D. S., Suh, J., Cho, H. Y., and Kim, K. W., "Trends of Laser Integrated Machine," J. Korean Soc. Precis. Eng., Vol. 25, No. 9, pp. 20-26, 2008.
- Zhang, C. and Shin, Y. C., "A Novel Laser-Assisted Truing and Dressing Technique for Vitrified CBN Wheels," Int. J. Precis. Eng. Manuf., Vol. 42, No. 7, pp. 825-835, 2002.
- Kalyon, M. and Yilbas, B. S., "Laser Pulse Heating: a Formulation of Desired Temperature at the Surface," Optics and Lasers in Engineering, Vol. 39, No. 1, pp. 109-119, 2003. https://doi.org/10.1016/S0143-8166(02)00088-X
- Yang, B., Shen, X., and Lei, S., "Mechanisms of Edge Chipping in laser-Assisted Milling of Silicon Nitride Ceramics," International Journal of Machine Tools and Manufacture, Vol. 49, No. 3-4, pp. 344-350, 2009. https://doi.org/10.1016/j.ijmachtools.2008.09.006
- Ahn, S. H. and Lee, C. M., "A Study on Large-Area Laser Processing Analysis in Consideration of the Moving Heat Source," Int. J. Precis. Eng. Manuf., Vol. 12, No. 2, pp. 285-292, 2011. https://doi.org/10.1007/s12541-011-0038-3
- Rozzi, J. C., Pfefferkorn, F. E., Shin, Y. C., and Incropera, F. P., "Experimental Evaluation of the Laser Assisted Machining of Silicon Nitride Ceramics," Journal of Manufacturing Science and Engineering, Vol. 122, No. 4, pp. 666-670, 2000. https://doi.org/10.1115/1.1286556
- Kim, D. H., Cha, N. H., Kim, T. W., and Lee, C. M., "A Fundamental Study on the Design of Two-axis Drive Manipulator for Laser-assisted Machining," J. Korean Soc. Precis. Eng., Vol. 29, No. 8, pp. 813-817, 2012. https://doi.org/10.7736/KSPE.2012.29.8.813
- Kim, K. S., Kim, J. H., Choi, J. Y., and Lee, C. M., "A Review on Research and Development of Laser Assisted Turning," Int. J. Precis. Eng. Manuf., Vol. 12, No. 4, pp. 753-759, 2011. https://doi.org/10.1007/s12541-011-0100-1
- Nasim, H. and Jamil, Y., "Diode Lasers: From Laboratory to Industry," Optics & Laser Technology, Vol. 56, pp. 211-222, 2014. https://doi.org/10.1016/j.optlastec.2013.08.012
- Kim, D. H. and Lee, C. M., "The Static and Dynamic Analysis of a 45,000rpm Spindle for a Machine Tool and Evaluation of its Stiffness," J. Korean Soc. Precis. Eng., Vol. 28, No. 4, pp. 422-426, 2011.
Cited by
- Study on Accuracy Evaluation of Laser Lens Changer for a Laser-Assisted Machining System vol.32, pp.8, 2015, https://doi.org/10.7736/KSPE.2015.32.8.687