References
- 2004, Kim, S.-S. and Kim, Y., "Measurement and Analysis of Energy Consumption of HVAC Equipment of a Research Building," Trans. of the SAREK, Vol.16, No.10, pp.914-922.
- 2012, Kim, Y.-K. and Lee, T.W., "An Analysis of the Energy Saving Effect through the Retrofit and the Optimal Operation of HVAC Systems," Trans. of the SAREK, Vol.24, No.4, pp.343-350. https://doi.org/10.6110/KJACR.2012.24.4.343
- 1996, Biancardi, F.R., Michels, H.H., Sienel, T.H. and Pandy, D.R., "Study of lubricant circulation in HVAC systems," United Technologies Research Center DOE-CE- 23810-71, Vol.1.
-
2009, Kang, B.H., Kim, K.J. and Lee, S.K., "An Experimental Study on Oil Separation Characteristics of
$CO_{2}/PAG$ Oil Mixture in an Oil Separator," Int. J. Air-Cond. Refrig., Vol.17, pp.88-93. -
2011, Lee, I.S. and Kang, B.H., "An Experimental Study on Correlation between Oil Discharge and Various Operating Conditions of a
$CO_{2}$ Compressor," Int. J. Air-Cond. Refrig., Vol.23, pp.73-79. - 2008, Youbi-Idrissi, M. and Bonjour, J., "The Effect of Oil in Refrigeration: Current Research Issues and Critical Review of Thermodynamic Aspects," Int. J. Refrig., Vol.31, pp.165-179. https://doi.org/10.1016/j.ijrefrig.2007.09.006
- 2010, Shin. H.S. and Kim. Y.J., "Oil Behaviors in Oil Separator with Various Discharge of Compressor Oil," Proc. of the KSME Fluid Eng Division Spring Annual Meeting, pp.28-29.
- 2011, Lee. D.Y., Kang, W.M., Kim, A.R., Kim, S.D., Na, S.U. and Ko, H.S., "Development of Design Technique for Oil Separator by Flow Visualization Technique," Proc. of the KSME Fluid Eng Division Fall Annual Meeting, pp.2149-2154.
- 2007, Shi, L. and Bayless, D.J., "Comparison of Boundary Conditions for Predicting the Collection Efficiency of Cyclones," Powder Technol., Vol.173, pp.29-37. https://doi.org/10.1016/j.powtec.2006.11.022
- 2006, Fukuda, M., Yanagisawa, T., Shimasaki, M. and Ogi, Y., "Real-time Measurement of Mixing Ratio of Refrigerant/refrigeration Oil Mixture," Int. J. Refrig., Vol.29, pp.1058-1065. https://doi.org/10.1016/j.ijrefrig.2006.03.010
- 2008, Cho, Y.S., Lee, S.W., Woo, K.S., Yoon, Y.B., Park, Y.J., Lee, D.Y., Kim, H. and Na, B., "A Numerical Analysis of Flow Characteristics and Oil Separation Performance for Cyclone Oil Separator Design," Tran .of the KSAE, Vol.6, No.5, pp.22-28.
- 1975, Launder, B.E., Reece, G.J. and Rodi, W., "Progress in the Development of a Reynolds-Stress Turbulent Closure," J. Fluid Mech., Vol.68, No.3, pp.537-566. https://doi.org/10.1017/S0022112075001814
- 2011, FLUENT, User Manual, Fluent Inc., pp.23-1-23-170.
- 1999, Rhodes, M., Introduction to Particle Technology, John Wiley & Sons, Hoboken, pp.176-191.
Cited by
- Effects of Oil Wettability on the Performance of a Cyclone-Type Oil Separator vol.26, pp.01, 2018, https://doi.org/10.1142/S2010132518500104