DOI QR코드

DOI QR Code

Crack source location by acoustic emission monitoring method in RC strips during in-situ load test

  • Shokri, Tala (College of Engineering (Civil), University of Miami) ;
  • Nanni, Antonio (College of Engineering (Civil), University of Miami)
  • 투고 : 2012.04.17
  • 심사 : 2013.02.13
  • 발행 : 2014.01.25

초록

Various monitoring techniques are now available for structural health monitoring and Acoustic Emission (AE) is one of them. One of the major advantages of the AE technique is its capability to locate active cracks in structural members. AE crack locating approaches are affected by the signal attenuation and dispersion of elastic waves due to inhomogeneity and geometry of reinforced concrete (RC) members. In this paper, a novel technique is described based on signal processing and sensor arrangement to process multisensory AE data generated by the onset and propagation of cracks and is validated with experimental results from an in-situ load test. Considering the sources of uncertainty in the AE crack location process, a methodology is proposed to capture and locate events generated by cracks. In particular, the relationship between AE events and load is analyzed, and the feasibility of using the AE technique to evaluate the cracking behavior of two RC slab strips during loading to failure is studied.

키워드

참고문헌

  1. ACI 437R-03 (2003), Strength evaluation of existing concrete buildings, ACI, Farmington Hills, MI.
  2. AEwin Software User's Manual (2009), Physical acoustic corporation, Princeton Junction, NJ.
  3. ASTM E1316-05 (2005), Standard terminology for non destructive examination, ASTM International, PA.
  4. ASTM E976-05 (2005), Standard guide for determining the reproducibility of acoustic emission sensor response, ASTM International, PA.
  5. Baron, J. and Ying, S. (1987), Acoustic emission source location, (Eds. R. Miller and P. McIntire), Nondestructive Testing Handbook Second Edition, Vol. 5: Acoustic Emission Testing, American Society for Nondestructive Testing.
  6. Carpinteri, A., Lacidogna, G. and Manuello, A. (2008), Localization accuracy of microcracks in damaged concrete structures, Acoustic Emission and Critical Phenomena, Taylor & Francis Group, London.
  7. De Luca, A., Zadeh, J.H. and Nanni, A. (2011), "In-situ load testing: assessment of the one way performance of reinforced concrete slabs", Accepted for publication by ACI Structural Journal.
  8. Grosse, C.U. and Ohtsu, M. (2008), Acoustic emission testing, Springer.
  9. Grosse, C.U. and Finck, F. (2006), "Quantitative evaluation of fracture processes in concrete using signal-based acoustic emission techniques", Cement Concrete Comp., 28, 330-336. https://doi.org/10.1016/j.cemconcomp.2006.02.006
  10. Guratzsch, R.F. and Mahadevan, S. (2010), "Structural health monitoring sensor placement optimization under uncertainty", AIAA J., 48(7), 1281-1289. https://doi.org/10.2514/1.28435
  11. McLaskey, G.C. and Glaser, S.D. (2007), "Temporal evaluation and 3D location of acoustic emission produced from the drying shrinkage of concrete", Adv. Acoust. Emission J., 6, 52-57.
  12. Miller, R.K. and Mclntire, P. (1987), Non-destructive testing handbook, Vol. 5, Acoustic Emission Testing, American Society for Nondestructive Testing, USA.
  13. Muhamad Bunnori, M., Pullin, R., Holford, K.M. and Lark, R.J. (2006) "A practical investigation into acoustic wave propagation in concrete structures", Adv. Mater. Res. J., 13-14, 205-212. https://doi.org/10.4028/www.scientific.net/AMR.13-14.205
  14. Ohtsu, M., Uchida, M., Okamoto, T. and Yuyama, S. (2002) "Damage assessment of reinforced concrete beams qualified by acoustic emission", ACI Struct. J., 99(4), 411-417.
  15. Salinas, V., Vargasa, Y., Ruzzanteb, J. and Gaetea, L. (2010), "Localization algorithm for acoustic emission", Phys. Procedia, 3, 863-871. https://doi.org/10.1016/j.phpro.2010.01.111
  16. Shull, P.J. (2002), Nondestructive evaluation theory, Techniques, and Applications, Marcel Dekker Inc, New York, NY.
  17. Tobias, A. (1976), "Acoustic emission source location in two dimensions by an array of three sensors", Non-Destructive Testing, 9(1), 9-12. https://doi.org/10.1016/0029-1021(76)90027-X
  18. Vannoy, D.W., Hariri, R. and Frantzis, C.D. (1991), Acoustic emission investigation and signal discrimination in highway bridge applications, Research report, Maryland State Highway Administration, FHWA/MD-91/05.
  19. Weiler, B., Xu, S.L. and Mayer, U. (1997), "Acoustic emission analysis applied to concrete under different loading conditions", Otto Graf J., 8, 255-272.

피인용 문헌

  1. Automated assessment of cracks on concrete surfaces using adaptive digital image processing vol.14, pp.4, 2014, https://doi.org/10.12989/sss.2014.14.4.719
  2. Crack sensing and healing in concrete beams based on wire-crack sensors and healing tube vol.132, 2017, https://doi.org/10.1016/j.conbuildmat.2016.12.007