한국전기전자재료학회논문지 (Journal of the Korean Institute of Electrical and Electronic Material Engineers)

  • 제27권1호
  • /
  • Pages.14-17
  • /
  • 2014
  • /
  • 1226-7945(pISSN)
  • /
  • 2288-3258(eISSN)
한국전기전자재료학회 (The Korean Institute of Electrical and Electronic Material Engineers)
권호 표지
DOI QR코드

DOI QR Code

소결 온도에 따른 0.94(Na0.5K0.5)NbO3-0.06(Sr0.5Ca0.5)TiO3-0.1 MnO2의 압전 특성

Piezoelectric Properties of 0.94(Na0.5K0.5)NbO3-0.06(Sr0.5Ca0.5)TiO3 with 0.1 MnO2 Addition at Varying Sintering Temperatures

  • 정혜린 (경상대학교 세라믹공학과) ;
  • 이성갑 (경상대학교 세라믹공학과) ;
  • 이태호 (경상대학교 세라믹공학과) ;
  • 김민호 (경상대학교 세라믹공학과) ;
  • 조예원 (경상대학교 세라믹공학과)
  • Jung, Hye-Rin (Department of Ceramic Engineering, Engineering Research Institute, Gyeongsang National University) ;
  • Lee, Sung-Gap (Department of Ceramic Engineering, Engineering Research Institute, Gyeongsang National University) ;
  • Lee, Tae-Ho (Department of Ceramic Engineering, Engineering Research Institute, Gyeongsang National University) ;
  • Kim, Min-Ho (Department of Ceramic Engineering, Engineering Research Institute, Gyeongsang National University) ;
  • Jo, Ye-Won (Department of Ceramic Engineering, Engineering Research Institute, Gyeongsang National University)
  • 투고 : 2013.07.31
  • 심사 : 2013.09.23
  • 발행 : 2014.01.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, lead-free Piezoelectric $(Na_{0.47}K_{0.47}Sr_{0.03}Ca_{0.03})(Nb_{0.94}Ti_{0.06})O_3$-0.1 $MnO_2$ ceramics were fabricated using mixed oxide method and the effects of various sintering temperature on the structural and electrical properties were investigated. For the $(Na_{0.47}K_{0.47}Sr_{0.03}Ca_{0.03})(Nb_{0.94}Ti_{0.06})O_3$-0.1 $MnO_2$ (NKN-SCT-$MnO_2$) ceramics sintered at temperatures of $1,025{\sim}1,100^{\circ}C$. The results indicated that all specimens were perovskite single phase formation without any second phase. It has been shown that relative density is increased to increasing sintering temperature. When the sintered temperature at $1,075^{\circ}C$, highest sintered density and maximum value of $4.45g/cm^3$. Average grain size is increased to increasing sintering temperature. The electromechanical coupling factor, dielectric constant, dielectric loss, d33 and curie temperature at the sintering temperature $1,075^{\circ}C$ of NKN-SCT-$MnO_2$ specimens were 0.22, 511, 0.033, 103 and $380^{\circ}C$, respectively.

키워드

참고문헌

  1. H. N. Al-Shareef, A. I. Kingon, X. Chen, K. R. Bellur, and O. Auciello, J. Mater. Res., 9, 2968 (1994). https://doi.org/10.1557/JMR.1994.2968
  2. R. Dat, D. J. Lichtenwalner, O. Auciello, and A. I. Kingon, Appl. Phys. Lett., 64, 2673 (1994). https://doi.org/10.1063/1.111488
  3. Y. Guo, K. Kakimoto, and H Ohsato, Appl. Phys. Lett., 85, 4121 (2004). https://doi.org/10.1063/1.1813636
  4. K. Sugnaga, K. Shibata, K. Watanabe, A. Nomoto, F. Horikiri, and T. Mishima, Jpn. J. Appl. Phys., 49, 09MA05 (2010).
  5. G. Shirane, J. Bernard, J. Hole, D. Jenko, and M. Kosec, J. Eur. Ceram. Soc., 25, 2707 (2005). https://doi.org/10.1016/j.jeurceramsoc.2005.03.127
  6. R. Wang, R. Xie, T. Sekiya, Y. Shimojo, Y. Akimune, N. Hirosaki, and M. Itoh, Jpn. J. Appl. Phys., Part 1, 41, 7119 (2002). https://doi.org/10.1143/JJAP.41.7119
  7. Y. Guo, K. Kakimoto, and H Ohsato, Solid State Commun., 129, 129 (2004). https://doi.org/10.1016/j.ssc.2003.09.025
  8. K. Kakimoto, I. Masuda, and H. Ohsato, Jpn. J. Appl. Phys., Part 1, 42, 6102 (2003). https://doi.org/10.1143/JJAP.42.6102
  9. S. Tashiro, H. Nagamatsu, and K. Nagata, Jpn. J. Appl. Phys., Part 1, 41, 7113 (2002). https://doi.org/10.1143/JJAP.41.7113
  10. T. H. Lee, D. Y. Kim, S. H. Jo, G. H. Jeong, and S. G. Lee, Trans. KIEE., 60, 2093 (2011).
  11. H. J. Hegemann, J. Phys. C: Solid State Phys., 11, 3333 (1978). https://doi.org/10.1088/0022-3719/11/15/031