DOI QR코드

DOI QR Code

폐비닐 골재가 혼합된 시멘트 콘크리트의 열 특성

Thermal Characteristics of Cement Concrete Mixed with Wasted Vinyl Aggregates

  • 염우성 (인하대학교 토목공학과) ;
  • 안기홍 (인하대학교 토목공학과, 한국건설기술연구원) ;
  • 유주호 (인하대학교 토목공학과) ;
  • 정진훈 (인하대학교 토목공학과)
  • 투고 : 2014.11.04
  • 심사 : 2014.11.21
  • 발행 : 2014.12.18

초록

PURPOSES : In this study, wasted vinyl aggregate, which possesses better thermal properties than natural aggregate, was used in cement concrete mixture to develop more economical concrete with thermal insulation and freeze prevention effects. METHODS : Slump and air content of the fresh concrete, which substituted its 0%, 5%, and 10% of coarse aggregate with wasted vinyl aggregate, were measured. Compressive strength, Poisson's ratio, elastic modulus, and splitting tensile strength of hardened concrete were measured by laboratory tests. Thermal properties of concrete such as coefficient of thermal expansion, thermal conductivity, and specific heat were also measured according to replacement ratio of wasted vinyl aggregate. Finally, the thermal insulation and freeze prevention effectiveness of the concrete mixed with wasted vinyl aggregate was confirmed through finite element analysis of road pavement crossing above concrete box culvert made from wasted vinyl aggregate. RESULTS : Even though the physical properties of wasted-vinyl-aggregate concrete such as compressive strength, Poisson°Øs ratio, elastic modulus, and splitting tensile strength were inferior to those of ordinary concrete, they met requirements for structural concrete. The thermal properties of concrete were improved by wasted vinyl aggregate because it decreased thermal conductivity and increased specific heat of the concrete. According to the result of finite element analysis, temperature variation in pavement subgrade was mitigated by box culvert made from wasted-vinyl-aggregate concrete. CONCLUSIONS : Through the laboratory test and finite element analysis of this study, it was concluded that the concrete structures made from wasted vinyl aggregate showed thermal insulation and freeze prevention effects.

키워드

참고문헌

  1. ABAQUS (2008) Theory Manual Version 6.8. Hibbit, Karlesson & Sorensen, Inc., Pawtucket, RI, USA.
  2. California DOT (2008) Highway Design Manual. California Department of Transportation, CA, USA.
  3. Hernandez-ortiz, J. P. (2006) Polymer Processing: Modeling and Simulation. Hanser Gardner Publications, Cincinnati, OH, USA.
  4. KEC (2009) Standard Drawings for Expressway Construction. Korea Expressway Corporation, Korea.
  5. Kim, B. J. (2014) Laboratory Test of Material Properties and Field Test of Snow-melting Effect for Asphalt Concrete Mixed with Waste Vinyl Aggregates. Master Thesis, Inha University, Korea.
  6. Kim, J. C., Yang, S. C., and Kim, N. H. (2003) "Influencing Factor on Thermal Coefficient of Concrete Due to Aggregate Types", Proceedings of the KCI 2003 Spring Conference, Korea Concrete Institute, Vol. 15, No. 1, pp. 249-254.
  7. Lee, T. G. (2006) "Development of a Program for Analysis of Heat of Mass Concrete", Journal of Woosong University, Vol. 11, pp. 127-141.
  8. ME (2013) Agricultural Waste Vinyl Generation Amount, Ministry of Environment, Korea.
  9. ME (2014) Wastes Control Act, Ministry of Environment, Korea.
  10. MLTM (2008) Standard Drawings of Culvert. Revision, Special Specifications, Ministry of Land, Transport and Maritime Affairs, Korea.
  11. MLTM (2014) A Research to Establish the 5th (2014-2018) Basic Planning for Aggregate Demand and Supply. Ministry of Land, Transport and Maritime Affairs, Korea.
  12. Park, J. B., Ju, J. W., Kim, H. D., Na, H. H., and Han, S. H. (2010) "Strength Characteristics of Soils Mixed with Crushed Stone as a Backfill of Reinforced Earth Wall", Journal of Korean Geosynthetics Society, Vol. 9, No. 4, pp. 67-73.
  13. Shin, B. W., Kim, H. R., and Choi, G. B. (2005) Construction Materials. Goomi Book, Korea.
  14. WSDOT, (2012) Glass Fiber Reinforced Ploymer Dowel Bar Evaluation. Washington State Department of Transportation, WS, USA.