Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Lubrication effect of slider bearing with wavy surface

파형이 있는 슬라이더 베어링의 윤활효과

  • Received : 2014.08.21
  • Accepted : 2014.10.11
  • Published : 2014.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

The influence of sine wave striated surface roughness on load carrying capacity of a bearing is studied for thin film effect of slider bearing. A Reynolds equation appropriate for slider bearing is used in this paper for analysis and it is discussed using finite difference method of central difference scheme. For a slider bearing with sine wave simple roughness form, several parameters such as pressure, load capacity and shear stress of the bearing can be obtained and also this results can be stored in sequential data file for latter analysis. After all, their distribution can be displayed and analyzed easily by using the matlab GUI technique. The parameters such as amplitude, number of waviness and slope of the surface are used for discussing the load carrying capacity of the rectangular bearing. The results reported in this paper should be applied to the other slider bearing such as rectangular or round embossed surface of slider bearing.

Keywords

References

  1. Chow, P. L. and Saibel, E. A., "On the Roughness Effects to Hydrodynamic Lubrication," ASME Journal of Lubrication Technology, Vol. 100, No. 2, pp. 176-179, 1978. https://doi.org/10.1115/1.3453133
  2. Christensen, H. and Tonder, K., "The Hydrodynamic Lubrication of Rough Bearing Surfaces of Finite Width," ASME Journal of Lubrication Technology, Vol. 93, No. 3, pp. 344, 1971.
  3. Patir, N., and Cheng, H. S., " An Average Flow Model for Determining Effects of Three Dimensional Roughness on Partial Hydrodynamic Lubrication", ASME Journal of Lubrication Technology, Vol. 100, No. 1, pp. 12-17, 1978. https://doi.org/10.1115/1.3453103
  4. Teale, J. L. and Lebeck, A. O., " An Evaluation of the Average Flow Model for Surface Roughness Effects in Lubrication," ASME Journal of Lubrication Technology, Vol. 102, No. 3, pp. 360-367, 1980. https://doi.org/10.1115/1.3251544
  5. White, J. W., " Surface Roughness Effects on the Load Carrying Capacity of very Thin Compressible Lubricating Films", ASME Journal of Lubrication Technology, Vol. 102, No. 4, pp. 445-451, 1980. https://doi.org/10.1115/1.3251579
  6. J. H. Shin, G. C. Lee, J. W. Park, B. S. Kang and K. W. Kim, "Study on the Load_carrying Capacity of Finite-Width Slider Bearing with Wavy Surface," Journal of KSTLE, Vol. 29, No. 1, pp. 13-18, 2013. https://doi.org/10.9725/kstle-2013.29.1.013
  7. J. H. Shin, B. S. Kang and K. W. Kim, "Surface Lay effects on the Lubrication Characteristics in the Valve Part of a Swash-plate Type Axial Piston Pump," Journal of KSTLE, Vol. 28, No. 1, pp. 12-18, 2012. https://doi.org/10.9725/kstle.2012.28.1.012
  8. Elrod, H. G., " A General Theory for laminar Lubrication with Reynolds Roughness," ASME Journal of Lubrication Technology, Vol. 101, No. 1, pp. 8-14, 1979. https://doi.org/10.1115/1.3453283
  9. Anno, J. N., Walowit, J. A. and Allen, C. M., "Microasperity Lubrication," ASME Journal of Lubrication Technology, Series F, Vol. 90, No. 2, pp. 351-355, 1968. https://doi.org/10.1115/1.3601568
  10. Burton, R. A., " Effects of Two-dimensional, Sinusoidal Roughness on the Load Support Characteristics of a Lubricant Film," Journal of Basic Engineering, Trans. ASME, Series D., Vol. 84, No. 2, pp. 258-264, 1963.
  11. Rhow, S. K. and Elord, H. G., "The Effects on Bearing Load-Carrying Capacity of Two-Sided Striated Roughness," ASME Journal of Lubrication Technology, Vol. 96, No. 4, pp. 554-560, 1974. https://doi.org/10.1115/1.3452486
  12. Elord, H. G., "Thin-Film Lubrication Theory for Newtonian Fluids with Surfaces posessing Striated Roughness or Grooving," ASME Journal of Lubrication Technology, Vol. 95, No. 4, pp. 484-489, 1973. https://doi.org/10.1115/1.3451862