DOI QR코드

DOI QR Code

Piezoelectric shunt damping by synchronized switching on negative capacitance and adaptive voltage sources

  • Qureshi, Ehtesham Mustafa (College of Aerospace Engineering, State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics) ;
  • Shen, Xing (College of Aerospace Engineering, State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics) ;
  • Chen, JinJin (College of Aerospace Engineering, State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics)
  • Received : 2014.10.15
  • Accepted : 2014.12.01
  • Published : 2014.12.30

Abstract

Synchronized switch damping (SSD) techniques have recently been developed for structural vibration control using piezoelectric materials. In these techniques, piezoelectric materials are bonded on the vibrating structure and shunted by a network of electrical elements. These piezoelectric materials are switched according to the amplitude of the excitation force to damp vibration. This paper presents a new SSD technique called 'synchronized switch damping on negative capacitance and adaptive voltage sources' (SSDNCAV). The technique combines the phenomenon of capacitance transient charging and electrical resonance to effectively dampen the structural vibration. Also, the problem of stability observed in the previous SSD techniques is effectively addressed by adapting the voltage on the piezoelectric patch according to the vibration amplitude of the structure. Analytical expressions of vibration attenuation at the resonance frequency are derived, and the effectiveness of this new technique is demonstrated, for the control of a resonant cantilever beam with bonded piezoelectric patches, by comparing with SSDI, SSDVenh, and SSDNC techniques. Theoretical predictions and experimental results show the remarkable vibration damping capability of SSDNCAV technique, which was better than the previous SSD techniques. The broadband vibration control capabilities of SSDNCAV technique are also demonstrated, which exceed those of previous SSD techniques.

Keywords

References

  1. Moheimani, S.O.R., "A survey of recent innovations in vibration damping and control using shunted piezoelectric transducers", IEEE Transactions on Control Systems Technology, Vol. 11, 2003, pp. 482-494. DOI:10.1109/TCST.2003.813371
  2. Davis, C.L. and Lesieutre, G.A., "A modal strain energy approach to the prediction of resistivity shunted piezoceramic damping", Journal of Sound and Vibration, Vol. 184, No. 1 ,1995, pp. 129-139. DOI: 10.1006/jsvi.1995.0308
  3. Forward, R.L., "Electronic damping of vibrations in optical structures", Applied Optics, Vol.18, No. 5, 1979, pp. 690-697. DOI: 10.1364/AO.18.000690
  4. Hagood, N.W. and von Flotow, A., "Damping of structural vibrations with piezoelectric materials and passive electrical networks", Journal of Sound and Vibration, Vol. 146, No. 2, 1991, pp. 243-268. DOI: 10.1016/0022-460X(91)90762-9
  5. Qiu, J., Ji, H. and Zhu, K., "Semi-active vibration control using piezoelectric actuators in smart structures", Frontiers of Mechanical Engineering in China, Vol. 4, No. 9, 2009, pp. 242-251. DOI: 10.1007/s11465-009-0068-z
  6. Wang, Y. and Inman, D.J., "A survey of control strategies for simultaneous vibration suppression and energy harvesting via piezoceramics", Journal of Intelligent Material Systems and Structures, Vol. 23, No. 18, 2012, pp. 2021-2037. DOI: 10.1177/1045389X12444485
  7. Hagood, N.W. and Crawley, E.F., "Experimental investigations of passive enhancement of damping space structures", Journal of Guidance, Control and Dynamics, Vol. 14, No. 6, 1991, pp. 1100-1109. DOI: 10.2514/3.20763
  8. Hollkamp, J.J., "Multimodal passive vibration suppression with piezoelectric materials and resonant shunts", Journal of Intelligent Material Systems and Structures, Vol. 5, No. 1, 1994, pp. 49-56. DOI: 10.1177/1045389X9400500106
  9. Law, H.H., Rossiter, P.L., Simon, G.P. and Koss, L.L., "Characterization of mechanical vibration damping by piezoelectric materials", Journal of Sound and Vibration, Vol. 197, No. 4, 1996, pp. 489-513. DOI:10.1006/jsvi.1996.0544
  10. Behrens, S., Moheimani, S.O.R. and Fleming, A.J.,"Multiple mode current flowing passive piezoelectric shunt controller", Journal of Sound and Vibration, Vol. 266, Issue 5, 2003, pp. 929-942. DOI:10.1016/S0022-460X(02)01380-9
  11. Richard, C., Guyomar, D., Audigier, D. and Ching, G., "Semi-passive damping using continuous switching of a piezoelectric device", In Proc. SPIE Conf. Passive Damping Isolation, Newport Beach, CA, Vol. 3672, 1999, pp. 104-111. DOI:10.1117/12.349773
  12. Clark, W.W., "Vibration control with state-switched piezoelectric materials", Journal of Intelligent Material Systems and Structures, Vol. 11, Issue 4, 2000, pp. 263-271. DOI: 10.1106/18CE-77K4-DYMG-RKBB
  13. Richard, C., Guyomar, D. and Audigier, D., et al., "Enhanced semi-passive damping using continuous switching of a piezoelectric device on an inductor", In Proc. of SPIE Smart Structures and Materials 2000: Damping and Isolation, Vol. 3989, 2000, pp. 288-299. DOI:10.1117/12.384569
  14. Guyomar, D., Richard, C. and L. Petit, L., "Non-linear system for vibration damping", 142nd Meeting of Acoustical Society of America, Fort Lauderdale, FL, 2001.
  15. Cunefare, K.A., "State-switched absorber for vibration control of point-excited beams", Journal of Intelligent Material Systems and Structures, Vol. 13, Issue 2-3, 2002, pp. 97-105. DOI:10.1177/104538902761402495
  16. Onoda, J., Makihara, K. and Minesugi, K., "Energyrecycling semi-active method for vibration suppression with piezoelectric transducers", AIAA Journal, Vol. 41 No. 4, 2003, 711-719. DOI: 10.2514/2.2002
  17. Corr, L.R. and Clark, W.W., "A novel semi-active multimodal vibration control law for a piezoceramic actuator", Journal of Vibration and Acoustics, Vol. 125, Issue 2, 2003, pp. 214-222. DOI:10.1115/1.1547682
  18. Petit, L., Lefeuvre, E., Richard, C. and Guyomar, D., "A broadband semi passive piezoelectric technique for structural damping", Proceedings of SPIE International Symposium on Smart Structure Materials: Damping and Isolation, Vol. 5386, 2004, pp. 414-425. DOI:10.1117/12.532716
  19. Lefeuvre, E., Badel, A. and Petit, L., et al., "Semipassive piezoelectric structural damping by synchronized switching on voltage sources", Journal of Intelligent Material Systems and Structures, Vol. 17, Issue 8-9, 2006, pp. 653-660. DOI: 10.1177/1045389X06055810
  20. Badel, A., Sebald, G. and Guyomar, D., et al., "Piezoelectric vibration control by synchronized switching on adaptive voltage sources: towards wideband semi-active damping", Journal of the Acoustical Society of America, Vol. 119, No. 5, 2006, pp. 2815-2825. DOI: 10.1121/1.2184149
  21. Neubauer, M. and Wallaschek, J., "Analytical and experimental investigation of the frequency ratio and switching law for piezoelectric switching techniques", Smart Materials and Structures, Vol.17, Issue 3, 2008, pp. 035003 (9pp). DOI:10.1088/09641726/17/3/035003
  22. Ji, H., Qiu, J. and Badel, A., et al., "Semi-active vibration control of a composite beam by adaptive synchronized switching on voltage sources based on LMS algorithm", Journal of Intelligent Material Systems and Structures, Vol. 20, Issue 8, 2009, pp. 939-947. DOI: 10.1177/1045389X08099967
  23. Ji, H., Qiu, J. and Zhu, K., et al., "Multi-modal vibration control using a synchronized switch based on a displacement switching threshold", Smart Materials and Structures, Vol. 18, Issue 3, 2009, pp. 035016 (8 pp). DOI:10.1088/0964-1726/18/3/035016
  24. Ji, H., Qiu, J., Zhu, K. and Badel, A., "Two-mode vibration control of a beam using nonlinear synchronized switching damping based on the maximization of converted energy", Journal of Sound and Vibration, Vol. 329, Issue 14, 2010, pp. 2751-2767. DOI:10.1016/j.jsv.2010.01.012
  25. Ji, H., Qiu, J. and Xia, P., "Analysis of energy conversion in two-mode vibration control using synchronized switch damping approach", Journal of Sound and Vibration, Vol. 330, Issue 15, 2011, pp. 3539-3560. DOI: 10.1016/j.jsv.2011.03.004
  26. Qureshi, E.M., Shen , X. and Chen J.J., "Vibration control laws via shunted piezoelectric transducers: A review", International Journal of Aeronautical and Space Sciences, Vol. 15, No. 1, 2014, pp. 1-19. DOI:10.5139/IJASS.2014.15.1.1
  27. Ji, H., Qiu, J., Cheng, J. and Inman, D., "Application of a negative capacitance circuit in synchronized switch damping techniques for vibration suppression", Journal of Vibration and Acoustics, Vol. 133, Issue 4, 2011, pp. 041015-1-10. DOI:10.1115/1.4003146
  28. Ji, H., Qiu, J., Badel, A. and Zhu, K., "Semi-active vibration control of a composite beam using an adaptive SSDV approach", Journal of Intelligent Material Systems and Structures, Vol. 20, Issue 4, 2009, pp. 401-412. DOI: 10.1177/1045389X08095182
  29. Mokrani, B., Rodrigues, G., Ioan, B., Bastaits, R. and Preumont, A., "Synchronized switch damping on inductor and negative capacitance", Journal of Intelligent Material Systems and Structures, Vol. 23, No. 18, 2012, pp. 2065-2075. DOI: 10.1177/1045389X11433493
  30. Han, X., Neubauer, M. and Wallaschek, J., "Improved piezoelectric switch shunt damping technique using negative capacitance", Journal of Sound and Vibration, Vol. 332, Issue 1, 2013, pp. 7-16. DOI: 10.1016/j.jsv.2012.08.001
  31. Horowitz, P. and Hill, W., The Art of Electronics, Cambridge University Press, New York, 1996.
  32. Riodan, R.H.S., "Simulated inductors using differential amplifiers", Electronic Letter, Vol. 3, No. 2, 1967, pp. 50-51. DOI: 10.1049/el: 19670039