DOI QR코드

DOI QR Code

Experimental Study on Non-contact Type Inspection System for Wing Rib Thickness Measurement

윙립 두께 측정용 비접촉식 검사 시스템에 관한 실험적 연구

  • Lee, In-Su (School of Automotive Engineering, Gyeongnam National University of Science and Technology) ;
  • Kim, Hae-Ji (Dept, of Automotive Engineering, Gyeongnam National University of Science and Technology) ;
  • Ahn, Myung-Sub (Korea Aerospace Industries, LTD.)
  • 이인수 (경남과학기술대학교 대학원 자동차공학과) ;
  • 김해지 (경남과학기술대학교 자동차공학과) ;
  • 안명섭 (한국항공우주산업(주))
  • Received : 2014.11.19
  • Accepted : 2014.12.10
  • Published : 2014.12.31

Abstract

This paper presents a non-contact inspection system for automatically measuring the thickness of an aircraft wing rip product. In order to conduct the inspection of the wing rib thickness automatically, a non-contact laser displacement sensor, end-effector, and a robot were selected for use. The non-contact type inspection system was evaluated by measuring the measurement deviation of the rotation direction of a C-type yoke end-effector and the transfer direction of a V-slim end-effector. In addition, the non-contact inspection system for wing rib thickness measurements was validated through thickness measurements of a web, flange, and stiffener.

Keywords

References

  1. J. Y. Lee, S. W. Kim, "Design of a Non-contact type Displacement Measurement System Based on Optical Triangulation Method", Journal of the Korean Society of Mechanical Engineers, Vol. 16, No. 6, pp. 1030-1035, 1992.
  2. J. S. Park, K. Jeong, "Characteristics of the Laser Displacement Sensor Using Oprical Triangulation Method", Journal of the Korean Society of Precision Engineering, Vol. 16, No. 7, pp. 40-50, 1999.
  3. Y. J. Kang, N. G. Park, D. H. Lee, "A Study on Adaptable Non-contact Shape Inspection System", Journal of the Korean Society for Nondestructive Testing, Vol. 25, No. 2, pp. 74-78, 2005.
  4. H. J. Kang, M. H. Kweon, Y. S. Suh, Y. S. Ro, "Development of a Robotic System for Measuring Hole Displacement Using Contact-Type Displacement Sensors", Journal of the Korean Society for Precision Engineering, Vol. 25, No. 1, pp. 79-84, 2008.
  5. S. H. Chung, D. H. No, "Developent of a Robot for Automation of a Callus Inoculation", Journal of the Bio-Environment Control, Vol. 18, No. 2, pp. 87-94, 2009.
  6. K. T. Park, S. J. Kim, T. J. Lho, "A Development of a General Purposed Control System of Robot End-Effector for Inspection and Maintenance of Steam Generator Heat Pipe" Journal of the Korean Academia-Industrial cooperation Society, Vol. 14, No. 1, pp. 33-38, 2013. https://doi.org/10.5762/KAIS.2013.14.1.33

Cited by

  1. LVDT센서를 이용한 접촉식 두께자동측정기 개발 vol.14, pp.4, 2014, https://doi.org/10.14775/ksmpe.2015.14.4.151