DOI QR코드

DOI QR Code

Manufacturing of MR Dampers and Estimation of the Bingham Model Parameters

MR 댐퍼의 제작과 Bingham 모델의 매개변수 추정

  • Lee, Gun-Myung (School of Mechanical Engineering, Engineering Research Institute, Gyeongsang National Univ.) ;
  • Park, Mun-Soo (Jinju Campus, Korea Polytechnic VII College)
  • 이건명 (경상대학교 기계공학부) ;
  • 박문수 (한국폴리텍 VII대학 진주캠퍼스)
  • Received : 2014.10.10
  • Accepted : 2014.12.17
  • Published : 2014.12.31

Abstract

Small MR dampers with a simple structure were designed and manufactured. The Bingham model was used to represent the dynamic characteristics of the damper, and the parameters of the model were estimated from experimental data which were obtained by harmonic tests. The value of the estimated yield shear force remains positive when no electric current is applied, and it increases slowly with the current. The estimated viscous damping coefficient has a value close to zero when no electric current is applied, and it increases almost linearly with the current.

Keywords

References

  1. Ha, S. H., Seong, M.-S., Heung, Q.-N. and Choi, S.-B., "Optimal Design of MR Damper : Analytical Method and Finite Element Method", Transactions of the KSNVE, Vol. 19, No. 11, pp. 1110-1118, 2009. https://doi.org/10.5050/KSNVN.2009.19.11.1110
  2. Seong, M.-S., Choi, S.-B., Kim, C.-H., Lee, H. K., Baek, J. H., Han, H. H. and Woo, J. K., "Experimental Performance Evaluation of MR Damper for Integrated Isolation Mount", Transactions of the KSNVE, Vol. 20, No. 12, pp. 1161-1167, 2010. https://doi.org/10.5050/KSNVE.2010.20.12.1161
  3. Kim, H.-S., Seong, M.-S., Choi, S.-B. and Kwon, O.-Y., "Performance Evaluation of a Full Vehicle with Semi-active MR Suspension at Different Tire Pressure", Transactions of the KSNVE, Vol. 21, No. 11, pp. 1067-1073, 2011. https://doi.org/10.5050/KSNVE.2011.21.11.1067
  4. Seong, J.-Y., Min, K.-W. and Kim, J., "Exact Solution for Resistance Capacity utilizing Bingham Model of MR Dampers under Collapse Load", Transactions of the KSNVE, Vol. 21, No. 3, pp. 234-240, 2011. https://doi.org/10.5050/KSNVE.2011.21.3.234
  5. Lee, G.-M., Ju, Y.-H. and Park, M.-S., "Development of a Low Frequency Shaker using MR Dampers", International Journal of Precision Engineering and Manufacturing, Vol. 14, No. 9, pp. 1647-1650, 2013. https://doi.org/10.1007/s12541-013-0222-8
  6. Stanway, R., Sproston, J. L. and Stevens, N. G., "Non-linear Modeling of an Electro-rheological Vibration Damper", Journal of Electrostatics, Vol. 20, No. 2, pp. 167-184, 1987. https://doi.org/10.1016/0304-3886(87)90056-8
  7. Rao, S. S., Mechanical Vibrations, Pearson Education, Inc., New Jersey, 2004.