펄프종이기술 (Journal of Korea Technical Association of The Pulp and Paper Industry)

한국펄프종이공학회 (Korea Technical Association of the Pulp and Paper Industry)
권호 표지
DOI QR코드

DOI QR Code

백판지의 두께 증대를 위한 목질섬유의 이용 (1) - 목질섬유의 이용 -

Improvement of Thickness in White Duplex Board by Utilization of Defibrated Fibers (1) - Utilization of Defibrated Fibers -

  • Seo, Yung Bum (Dept. of Bio-based Materials, Coll. of Agri. and Life Sci., Chungnam National Univ.) ;
  • Kim, Hyun Jun (SSangyong C&B Inc.)
  • 투고 : 2014.12.05
  • 심사 : 2014.12.17
  • 발행 : 2014.12.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Wood fibers for medium density fiberboard (MDF) was used in the filler layer of the white duplex board for increasing thickness and bulk of the board. The MDF fibers and the old corrugated container (OCC) furnish were refined, and mixed together to form paperboard. At optimum mixing ratios and refining degrees, stiffness and tensile strength of the MDF fiber-containing board were higher than those of the board with 100% OCC. It was found that there was possibility to reduced basis weight of the filler layer down to 90% of the all OCC furnish by judicious selection of the mixing ratio and the refining method of the MDF fibers. Drainage rate increase and potential drying energy savings were additional benefits.

키워드

참고문헌

  1. Scott, W. E. and Trosset, S., Properties of Paper: An Introduction, Tappi Press, pp. 64-67 (1989).
  2. White duplex board, ed. Board Commette of Korea Paper Association, pp. 19-29 (1985).
  3. Ghasemian, A., Ghaffari M., and Ashori A., Strength enhancing effect of cationic starch on mixed recycled and virgin pulps, Carbohydrate Polymers 87(2): 1269-1274 (2012). https://doi.org/10.1016/j.carbpol.2011.09.010
  4. Sung, Y. J., Lee, H. B., Jeong, W. K., Jung, J. G., Choi, S. G., Im, C. K., Gwon, W. O., and Seo, Y. B., Changes in wet pressing response of OCC stock by the beating time and the addition of polymer aids, Journal of Korea TAPPI 43(2):77-82 (2011).
  5. Kim, C. H., Lee, J. Y., Lee, Y. R., Chung, H. K., Back, K. K., Lee, H. J., Gwak, H. J., Gang, H. R., and Kim, S. H., Fundamental study on developing lignocellulosic fillers for papermaking (II), Journal of Korea TAPPI 41(2):1-6 (2009).
  6. Shin, T. G., Kim, C. H., Chung, H. K., Seo, J. M., and Lee, Y. R., Fundamental study on developing lignocellulosic fillers for papermaking (I), Journal of Korea TAPPI 40(2):8-15 (2008).
  7. Kim, H. H., Kim, C. H., Seo, J. M., Lee, J. Y., Kim, S. H., Park, H. J., and Kim, G. C., Use of modified lignocellulosic fillers to improve paper properties, Appita 64(4):338-343 (2011).
  8. Yoon, M. S., Yoo, H. J., Jung, C. H., and Park, J. M., Color supplementation of base paper for coating after wooden fillers addition, Journal of Korea TAPPI 44(1):24-30 (2012). https://doi.org/10.7584/ktappi.2012.44.1.024
  9. Hwang, I. Y., Lee, Y. H., Jung, J. G., Sung, Y. J., and Seo, Y. B., Application of spacers for increasing OCC solid content in wet pressing process (I), Journal of Korea TAPPI 44(4):1-7 (2012). https://doi.org/10.7584/ktappi.2012.44.4.001
  10. Hwang, I. Y., Ji, S. J., and Seo, Y. B., Use of calcium carbonate for improving solid content of KOCC wet web, Journal of Korea TAPPI 45(6):1-9 (2013). https://doi.org/10.7584/ktappi.2013.45.6.001
  11. Xu, Y. F. and Deng, Y. L., Retention of precipitated calcium carbonate in old corrugated container furnishes, Tappi Journal 82(8):121-126 (1999).