초록
본 연구의 목적은 파형 복부판과 허니컴 샌드위치 패널에 사용된 강판 보강 방법을 강바닥판에 적용하고, 새로운 리브와 기존 개단면 및 폐단면 리브와의 비교를 통하여 경제적인 새로운 형태의 리브를 제안하는데 있다. 새로운 리브 형태로 사다리꼴 파형, ㄹ형, 벌집형, ㅁ형 리브를 고려하고, 개단면 및 폐단면 리브와 리브 강재량을 비교한 결과, 경제성 측면에서 벌집형과 ㅁ형 리브가 좋은 결과를 나타내었으며, ㅁ형 리브가 벌집형보다 좀 더 좋음을 알 수 있었다. 실제 강바닥판에 적용 가능한 ㅁ형 리브를 만들기 위하여, 민감도 분석과 매개변수 연구를 수행하였으며, 특정 응력 조건하에서 적정한 단면을 선택할 수 있는 시스템을 구축하였다. 실 교량의 폐단면 리브와 제안한 시스템의 ㅁ형 리브의 강재량을 비교한 결과, 새로운 형태의 리브가 더 경제적임을 알 수 있었다. 따라서, ㅁ형 리브를 갖는 보강판에 대하여 본 연구에서 제안한 시스템을 이용하면 보다 더 경제적인 강바닥판을 얻을 수 있을 것으로 판단된다.
The purpose of this study is to propose an economic new type rib by applying plate stiffening methods of the corrugated plate and the honey-comb sandwich panel to the steel deck plate and comparing the new type rib with existing open and closed ribs. The trapezoidal corrugated type, ㄹ type, honey-comb type and ㅁ type ribs are considered as new type ribs and the moment and the steel volume are compared with that of open ribs and closed ribs. The results shows that the honey-comb type and ㅁ type ribs are good in aspects of economic feasibility and the ㅁ type is better than the honey-comb type. To make the ㅁ type rib applicable to the steel deck plate, the sensitivity analysis and parametric study are performed and the system to select the proper section under the particular stress condition is established. The closed rib of real bridges is compared with the ㅁ type rib of the proposed system and it is known that the new type rib is more economic. Therefore, more economic steel deck plates can be achieved by using the system proposed in this study for the plate stiffened with the new ㅁ type rib.