참고문헌
- Kim, W., Jeon, Y., and Cho, S., "Analysis and Experiment of Ultrasonic Vibration Mechanism using PZT Actuator for Precision Laser Machining," J. Korean Soc. Precis. Eng., Vol. 28, No. 12, pp. 1347- 1352, 2011.
- Cho, K.W. and Park, H. J., "Laser Drilling System for Fabrication of Micro via Hole of PCB," J. Korean Soc. Precis. Eng., Vol. 27, No. 10, pp. 14-22, 2010.
- Nedialkov, N., Sawczak, M., Jendrzejewski, R., Atanasov, P., Martin, M., and Sliwinski, G., "Analysis of Surface and Material Modifications caused by Laser Drilling of AlN Ceramics," Applied Surface Science, Vol. 254, No. 4, pp. 893-897, 2007. https://doi.org/10.1016/j.apsusc.2007.07.151
- Ji, L., Yan, Y., Bao, Y., and Jiang, Y., "Crack-free Cutting of Thick and Dense Ceramics with CO2 Laser by Single-pass Process," Optics and Lasers in Engineering, Vol. 46, No. 10, pp. 785-790, 2008. https://doi.org/10.1016/j.optlaseng.2008.04.020
- Tsai, C. and Li, C., "Investigation of underwater laser drilling for brittle substrates," Journal of materials processing technology, Vol. 209, pp. 2838-2846, 2009. https://doi.org/10.1016/j.jmatprotec.2008.06.057
- Ng, G. K. L. and Li, L., "The Effect of Laser Peak Power and Pulse Width on the Hole Geometry Repeatability in Laser Percussion Drilling," Optics & Laser Technology, Vol. 33, No. 6, pp. 393-402, 2001. https://doi.org/10.1016/S0030-3992(01)00048-2
- Voisey, K. T. and Clyne, T. W., "Laser Drilling of Cooling Holes Through Plasma Sprayed Thermal Barrier Coatings," Surface and Coatings Technology, Vol. 176, No. 3, pp. 296-306, 2004. https://doi.org/10.1016/S0257-8972(03)00748-5
- Low, D. K. Y., Li, L., Corfe, A. G., and Byrd, P. J., "Spatter-free Laser Percussion Drilling of Closely Spaced Array Holes," International Journal of Machine Tools & Manufacture, Vol. 41, No. 3, pp. 361-377, 2001. https://doi.org/10.1016/S0890-6955(00)00078-X
- Dhupal, D., Doloi, B., and Bhattacharyya, B., "Pulsed Nd:YAG Laser Turning of Micro-groove on Aluminum Oxide Ceramic (Al2O3)," International Journal of Machine Tools and Manufacture, Vol. 48, No. 2, pp. 236-248, 2008. https://doi.org/10.1016/j.ijmachtools.2007.08.016
- Perrie, W., Rushton, A., Gill, M., Fox, P., and O'Neill, W., "Femtosecond Laser Micro-structuring of Alumina Ceramic," Applied Surface Science, Vol. 248, No. 1-4, pp. 213-217, 2005. https://doi.org/10.1016/j.apsusc.2005.03.005
- Williams, O., Williams, M., Liu, C., Webb, P., and Firth, P., "Laser Micromachining of Polycrystalline Alumina and Aluminium Nitride to Enable Compact Optoelectronic Interconnects," Proc. of 11th Electronics Packaging Technology Conference, pp. 920-925, 2009.
- Barnes, C., Shrotriya, P., and Molian, P., "Waterassisted Laser Thermal Shock Machining of Alumina," International Journal of Machine Tools & Manufacture, Vol. 47, No. 12-13, pp. 1864-1874, 2007. https://doi.org/10.1016/j.ijmachtools.2007.04.003
- Choo, K. L., Ogawa, Y., Kanbargi, G., Otra, V., Raff, L. M., and Komanduri, R., "Micromachining of Silicon by Short-pulse laser Ablation in Air and Under water," Materials Science and Engineering A, Vol. 372, No. 1-2, pp. 145-162, 2004. https://doi.org/10.1016/j.msea.2003.12.021
- Musaev, O. R., Midgley, A. E., Wrobel, J. M., and Kruger, M. B., "Laser Ablation of Alumina in Water," Chemical Physics Letters, Vol. 487, No. 1-3, pp. 81- 83, 2010. https://doi.org/10.1016/j.cplett.2010.01.011