참고문헌
- Sutherland, H.J., Mandell, J.F., 2004, "Effect of mean stress on the damage of wind turbine blades", Journal of Solar Energy Engineering, Vol. 126, 1041-1049. https://doi.org/10.1115/1.1785160
- Maher, A, Noroozi, S., Vinney, J., 2007, "Combined analytical/ FEA-based coupled aero structure simulation of a wind turbine with bend-twist adaptive blades", Renewable Energy, Vol. 32, 916-930. https://doi.org/10.1016/j.renene.2006.04.007
- Zhao, X., Maiaer, P., Wu, J., 2007, "A new multibody modelling methodology for wind turbine structures using a cardanic joint beam element", Renewable Energy, Vol. 32, 532-546. https://doi.org/10.1016/j.renene.2006.04.010
- Muyeen, S.M., Ali, M.H., Takahashi, R., Murata, T., Tamura, J., 2008, "Damping of blade-shaft torsional oscillations of wind turbine generator system", Electric Power Components and Systems, Vol. 36, 195-211. https://doi.org/10.1080/15325000701549293
- Oerlemans, S., Schepers, J.G., 2009, "Prediction of wind turbine noise and validation against experiment", Aeroacoustics, Vol. 8, 555-584. https://doi.org/10.1260/147547209789141489
- Kim, J., Kim, W., 2011, "Viscous flow analysis around a wind turbine blade with end plate and rake", Journal of the Korean Society for Marine Environmental Engineering, Vol. 14, 273-279. https://doi.org/10.7846/JKOSMEE.2011.14.4.273
- Jonkman, J.M., 2009, "Dynamics of offshore floating wind turbines -model development and verification", Wind Energy, Vol. 12, 459-492. https://doi.org/10.1002/we.347
- Passon, P., Kuhn, M., 2005, "State-of-the-art and development needs of simulation codes for offshore wind turbines", Copenhagen Offshore Wind 2005 Conference and Expedition Proceedings, Copenhagen, Denmark.
- MSC. Software, 2005, "ADAMS/WT User's Guide-Ver. 2.0", USA.
- MSC. Software, 2010, "MSC.ADAMS User's Manual-Ver. 2010", USA.
- NREL, 2002, "AeroDyn User's Guide-Ver. 12.5", USA.
- NREL, 2005, "AeroDyn Theory Manual", USA.
- Robinson, M., Musial, W., 2006, "Offshore Wind Technology Overview", NREL Report, NREL/PR-500-40462.
- GL, 2003, "Guideline for the Certification of Wind Turbines", Germany.
- GL, 2005, "Guideline for the Certification of Offshore Wind Turbines", Germany.
- IEC, 2005, "IEC 61400-1: Design Requirements for Wind Turbines-Third Edition", Switzerland.
- IEC, 2009, "IEC 61400-3: Design Requirements for Offshore Wind Turbines-Edition 1.0", Switzerland.
- Passon, P., Kuhn, M., Butterfield, S., Jonkman, J., Camp, T., Larsen, T. J., 2007, "OC3-Benchmark exercise of aero-elastic offshore wind turbine codes", Journal of Physics: Conference Series, Vol. 75, 1-12.
- Jang, S.J., Sohn, J.H., 2011, "Analysis of dynamic behavior of floating offshore wind turbine system", Trans. Korean Soc. Mech. Eng. A, Vol. 35, 77-83. https://doi.org/10.3795/KSME-A.2011.35.1.077
- Park, K., Cha, J., Ku, N., Jo, A., Lee, K., 2012, "Structural analysis of floating offshore wind turbine tower based on flexible multibody dynamics", Trans. Korean Soc. Mech. Eng. A, Vol. 36, 1489-1495. https://doi.org/10.3795/KSME-A.2012.36.12.1489
- Riso National Laboratory, 2007, "HAWC2 User's Manual-Ver. 3.1", Demark.
- NREL, 2005, "FAST User's Guide-Ver. 6.0", USA.
- Shabana, A.A., 2005, "Dynamics of Multibody Systems, Third edition", Cambridge University Press.
- Dorf, R.C., Svoboda, J.A., 2010, "Introduction to Electric Circuits (8th ed.)", John Wiley & Sons.
- Jonkman, J.M., 2007, "Dynamics modeling and loads analysis of an offshore floating wind turbine", NREL Technical Report, NREL/TP-500-41958.