DOI QR코드

DOI QR Code

Strip Angle Changes in Accordance with the Deformation Mode of Seismic Steel Plate Shear Wall Systems

내진 강판전단벽시스템의 변형모드에 따른 스트립앵글 변화

  • Lee, Kangmin (Department of Architecture Engineering, Chungnam National University) ;
  • Li, Rui (Department of Architecture Engineering, Chungnam National University) ;
  • Chen, Liuyi (Department of Architecture Engineering, Chungnam National University) ;
  • Oh, Keun Yeong (Department of Architecture Engineering, Chungnam National University) ;
  • Kim, Woo Seok (Department of Civil Engineering, Chungnam National University)
  • 이가민 (충남대학교, 건축공학과) ;
  • 이예 (충남대학교, 건축공학과) ;
  • 진유의 (충남대학교, 건축공학과) ;
  • 오근영 (충남대학교, 건축공학과) ;
  • 김우석 (충남대학교, 토목공학과)
  • Received : 2013.06.10
  • Accepted : 2013.07.30
  • Published : 2013.10.27

Abstract

This study investigated the tension-field action induced strip angle changes and deformed mode shapes of SPSW for high-rise structures subjected to lateral forces. Based on the numerical analysis 3, 9, 14 and 20 story structures, shear and flexural modes were identified by comparing the numerical analysis results to the predicted strength by theory. Shear deformation mode exhibited a constant angle in tension-field; whereas, flexural mode of the numerical results, differed from the tension-field action theory.

횡하중을 받는 고층건물에서의 인장역이 형성될 때 강판전단벽의 앵글 변화한다. 본 연구에서는 강판전단벽을 갖는 3층, 9층, 14층 및 20층의 4개 구조물에 대한 유한요소해석 연구를 하였다. 유한요소해석 결과와 각 모델들의 이론식으로 계산된 결과를 비교하여 전단변형 모드와 휨변형 모드로 분류하였다. 전단변형 모드의 모델에서는 주응력 벡터가 일정한 경사각을 이루며 인장역을 발생시킨 반면 휨변형 모델에서는 인장역의 변화는 기존의 이론식과 차이를 보였다.

Keywords

References

  1. Thorburn, L.J., Kulak, G.L., and Montgomery, C.J. (1983) Analysis of Steel Plate Shear Walls, Structural Engineering Report No. 107, Dept. of Civil Engineering, Univ. Alberta, Edmonton, Alberta, Canada.
  2. Timler, P.A. and Kulak, G.L. (1983) Experimental Study of Steel Plate Shear Walls, Structural Engineering Report No. 114, Dept. of Civil Engineering, Univ. Alberta, Edmonton, Alberta, Canada.
  3. Tromposch, E.W. and Kulak, G.L. (1987) Cyclic and Static Behavior of Thin Panel Steel Plate Shear Walls, Structural Engineering Report No. 145, Dept. of Civil Engineering, Univ. Alberta, Edmonton, Alberta, Canada.
  4. 위지은, 이명호, 오상훈, 허충, 오영석, 윤명호, 문태섭(2000) 전단 항복형 강판 내진벽의 거동, 대한건축학회 추계학술발표대회 논문집, 대한건축학회, 제20권, 제2호, pp.377-380. Wi, J.E., Lee, M.H., Oh, S.H., Huh, C., Oh, Y.S., Yoon, M.H., and Moon, T.S. (2000) Behavior of Shear Yielding Steel Plate Seismic Wall, Proceedings of Fall Conference of Architectural Institute of Korea, AIK, Vol. 20, No, 2, pp.377-380 (in Korean).
  5. 이명호, 오상훈, 윤명호, 문태섭(2006) 스트립모델을 이용한 강판 전단패널의 해석, 대한건축학회지, 대한건축학회, 제22권, 제3호, pp.79-86. Lee, M.H., Oh, S.H., Yoon, M.H., and Moon, T.S. (2006) Analysis of Steel-Plate Shear Panels using Strip Model, Review of Architecture and Building Science, AIK, Vol. 22, No. 3, pp.79-86 (in Korean).
  6. 강헌성, 이명호, 김재건, 윤명호, 문태섭(2003) 스트립모델에 의한 강판 전단벽의 해석, 한국강구조학회 2003 년도 학술발표대회 논문집, 한국강구조학회, pp.372-379. Kang, H.S., Lee, M.H., Kim, J.K., Yoon, M.H., and Moon, T.S. (2003) Analysis of Steel Plate Shear Walls Based on Strip Model, Proceedings of Annual Conference Korean Society of Steel Construction, KSSC, pp.372-379 (in Korean).
  7. 황성래, 곽재혁, 김원기, 박홍근, 전상우(2003) 강판전단벽 골조의 해석과 분석, 한국강구조학회 2003년도 학술발표대회 논문집, 한국강구조학회, pp.428-434. Hwang, S.R., Kwak, J.H., Kim, W.K., Park, H.G., and Jeon, S.W. (2003) Structural Analysis and Evaluation of a Steel Plate Shear Wall Building, Proceedings of Annual Conference Korean Society of Steel Construction, KSSC, pp.428-434 (in Korean).
  8. 대한건축학회(2010) KBC 2009에 따른 강구조내진설계 메뉴얼, 한국건축구조기술사회, 구미서관 KSEA (2010) Seismic Design Manual of Steel Buildings per KBC2009, The Korean Structural Engineers Association, Goomibooks (in Korean).
  9. AISC (2005), AISC Seismic Provision 2005 for Structural Steel Buildings, American Institute of Steel Construction, USA.
  10. Driver, R.G., Kulak, G.L., Kennedy, D.J., and Elwi, A.E. (1997) Seismic Behavior of Steel Plate Shear Walls, Structural Engineering Report No. 215, Dept. of Civil Engineering, Univ. Alberta, Edmonton, Alberta, Canada.
  11. Berman, J. and Bruneau, M. (2003) Plastic Analysis and Design of Steel Plate Shear Walls, Journal of Structural Engineering, ASCE, Vol. 129, No. 11, pp.1148-1456.
  12. Seilie, I.F. and Hooper, J.D. (2005) Steel Plate Shear Wall: Practical Design and Construction, Modern Steel Construction, AISC, Vol. 45, No. 4, pp.37-45.
  13. 박홍근, 최인락, 전상우, 김원기(2006) 전단지배 강판벽의 연성능력, 한국강구조학회논문집, 한국강구조학회, 제18권, 제4호, pp.457-468. Park, H.G., Choi, I.R., Jeon, S.W., and Kim, W.K. (2006) Ductility Capacity of Shear-Dominated Steel Plate Walls, Journal of Korean Society of Steel Construction, KSSC, Vol. 18, No. 4, pp.457-468 (in Korean).
  14. CSA (2001), Limit State of Design of Steel Structure, Canadian Standards Association, Canada.
  15. Rezai, M. (1999) Seismic Behavior of Steel Plate Shear Walls by Shake Table Testing, Ph.D. Dissertation, University of British Columbia, Vancouver, Canada.
  16. Basler, K. (1963) Strength of Plate Girders under Combined Bending and Shear, Journal of Structural Division, ASCE, Vol. 87, No. 2, pp.181-197.

Cited by

  1. An Experimental Study on the Shear Hysteresis Behavior of Shallow Corrugated Steel Plate vol.31, pp.10, 2015, https://doi.org/10.5659/JAIK_SC.2015.31.10.11
  2. Hysteresis Behavior and Energy Dissipation in Accordance with the Corrugation Depth of the Trapezoidal-Corrugated Steel Plate vol.32, pp.12, 2016, https://doi.org/10.5659/JAIK_SC.2016.32.12.15