Journal of the Korean institute of surface engineering (한국표면공학회지)

The Korean Institute of Surface Engineering (한국표면공학회)
권호 표지
DOI QR코드

DOI QR Code

The Study on Coatings to Improve the Radiative Heat Dissipation of Aluminum Alloy

알루미늄 합금의 복사방열향상을 위한 코팅연구

  • Seo, Mihui (Department of Materials Science and Engineering, Pusan National University) ;
  • Kim, Donghyun (Department of Materials Science and Engineering, Pusan National University) ;
  • Lee, Junghoon (Department of Materials Science and Engineering, Pusan National University) ;
  • Chung, Wonsub (Department of Materials Science and Engineering, Pusan National University)
  • Received : 2013.10.02
  • Accepted : 2013.10.25
  • Published : 2013.10.30
Download PDF
⟨ Previous Next ⟩

Abstract

The aim of the present study was to improve the radiative heat dissipation of aluminum alloy, Al 1050. Resin/CuO coating and Cu/CuO composite plating were applied on aluminum alloy to improve the radiative heat dissipation. Resin/CuO coating was made using thermosetting silicon resin and Cu/CuO composite plating was made in pyrophosphate copper plating bath. Radiant heat flux($W/m^2$) was measured by self-produced radiant heat measurement device to compare each specimen. The cross section of specimen and chemical bonding of surface were analyzed by FE-SEM, XPS and FT-IR. As a result, radiant heat of Resin/CuO coating was higher than Cu/CuO composite plating due to the adhesion with aluminum plate and the difference in chemical bonding. But, Both of them were higher than aluminum alloy. In order to confirm the result of experiment, aluminum plate, Resin/CuO coating and Cu/CuO composite plating sample were applied LED and measured the LED temperature. As a result, LED temperature of samples were matched previous results and confirmed coated samples were lower about 10 degrees than the aluminum alloy.

Keywords

References

  1. D. Heroedu, Basic Far-infrared Radiation Engineering, Gyeomjisa, Seoul (1997).
  2. C. J. M. Lasance, Electronics Cooling, November (2005).
  3. Scigiene Corporation, IR Thermometers & Emissivity (2005) 1.
  4. C. C. Lia, M. H. Chang, Mater. Lett., 58 (2004) 3903. https://doi.org/10.1016/j.matlet.2004.05.088
  5. Ewa Rudnik, Tomasz Jucha, Surf. Coat. Technol., (2013) SCT-18573.
  6. ASTM (American Society for Testing and Materials) D5470 : Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials.
  7. David. R. Gaskell, Introduction to Transport Phenomena in Materials Engineering, Prentice Hall, U.S (2000).
  8. Pavia, Donald L. Brooks, Introduction to Spectroscopy, 3/E 672, Harcourt-Brace, U.S (2008).
  9. M. R. Johan, M. S. M. Suan, Nor Liza Hawari, Hee Ay Ching, Int. J. Electrochem. Sci., 6 (2011) 6094.
  10. Danilo C. Pereira, Dalva Lucia A. de Faria, Vera R. L. Constantino, J. Braz. Chem. Soc., 17(8) (2006) 1651. https://doi.org/10.1590/S0103-50532006000800024
  11. B. Shokri, M. Abbasi Firouzjah, S. I. Hosseini, In Proceedings of 19th International Symposium on Plasma Chemistry Society (2009).
  12. Markova-Deneva, Journal of the University of Chemical Technology and Metallurgy, 45(4) (2010) 351.