DOI QR코드

DOI QR Code

Optimal Sizing of the Manifolds in a PEM Fuel Cell Stack using Three-Dimensional CFD Simulations

3차원 CFD 시뮬레이션을 활용한 고분자전해질 연료전지 스택의 매니폴드 크기 최적화

  • 정지훈 (GS칼텍스 중앙기술연구소) ;
  • 한인수 (GS칼텍스 중앙기술연구소) ;
  • 신현길 (GS칼텍스 중앙기술연구소)
  • Received : 2013.09.27
  • Accepted : 2013.10.31
  • Published : 2013.10.31

Abstract

Polymer electrolyte membrane (PEM) fuel cell stacks are constructed by stacking several to hundreds of unit cells depending on their power outputs required. Fuel and oxidant are distributed to each cell of a stack through so-called manifolds during its operation. In designing a stack, if the manifold sizes are too small, the fuel and oxidant would be maldistributed among the cells. On the contrary, the volume of the stack would be too large if the manifolds are oversized. In this study, we present a three-dimensional computational fluid dynamics (CFD) model with a geometrically simplified flow-field to optimize the size of the manifolds of a stack. The flow-field of the stack was simplified as a straight channel filled with porous media to reduce the number of computational meshes required for CFD simulations. Using the CFD model, we determined the size of the oxidant manifold of a 30 kW-class PEM fuel cell stack that comprises 99 cells. The stack with the optimal manifold size showed a quite uniform distribution of the cell voltages across the entire cells.

Keywords

References

  1. J. Larminie and A. Dicks, "Fuel cell systems: explained", Wiley, Chichester, England, 2003.
  2. C.-H. Chen, S.-P. Jung, and S.-C. Yen, "Flow distribution in the manifold of PEM fuel cell stack", J. Power Sources, Vol. 173, 2007, pp. 249-263. https://doi.org/10.1016/j.jpowsour.2007.05.007
  3. Y. Sung, "Optimization of a fuel-cell manifold", J. Power Sources, Vol. 157, 2006, pp. 395-400. https://doi.org/10.1016/j.jpowsour.2005.07.067
  4. J. Wang, "Pressure drop and flow distribution in parallel-channel configurations of fuel cells: Z-type arrangement", Int. J. Hydrogen Energy, Vol. 35, 2010, pp. 5498-5509. https://doi.org/10.1016/j.ijhydene.2010.02.131
  5. J. Wang, "Pressure drop and flow distribution in parallel-channel configurations of fuel cells: U-type arrangement", Int. J. Hydrogen Energy, Vol. 33, 2008, pp. 6339-6350. https://doi.org/10.1016/j.ijhydene.2008.08.020
  6. P. A. C. Chang, J. St-Pierre, J. Stumper, and B. Wetton, "Flow distribution in proton exchange membrane fuel cell stacks", J. Power Sources, Vol. 162, 2006, pp. 340-355. https://doi.org/10.1016/j.jpowsour.2006.06.081
  7. G. Karimi, J. J. Baschuk, and X. Li, "Performance analysis and optimization of PEM fuel cell stacks using flow network approach", J. Power Sources, Vol. 147, 2005, pp. 162-177. https://doi.org/10.1016/j.jpowsour.2005.01.023
  8. C. Y. Wang, "Fundamental models for fuel cell engineering," Chem. Rev., Vol. 104, 2004, pp. 4727-4766. https://doi.org/10.1021/cr020718s
  9. CD-Adapco Group, STAR-CD methodology Version 4.03, CD-Adapco, 2006.

Cited by

  1. Development of a 25kW-Class PEM Fuel Cell System for the Propulsion of a Leisure Boat vol.25, pp.3, 2014, https://doi.org/10.7316/KHNES.2014.25.3.271
  2. Modeling of a PEM Fuel Cell Stack using Partial Least Squares and Artificial Neural Networks vol.53, pp.2, 2015, https://doi.org/10.9713/kcer.2015.53.2.236