참고문헌
- C. H. Chun, S. S. Kim, D. C. Kim, H. J. Yoo, "The Treatment of Nonunion of Femoral Fractures with an Interlocking Nailing," Journal of the Korean Fracture Society, Vo1.8, No.3, pp. 497-504, July, 1995.
- S. T. Jung, T. R.Yoon, J. K. Seon, "Treatment of the Femoral Shaft Fractures with Interlocking Compression Nail," Journal of the Korean Fracture Society, Vol. 11, No. 2, pp. 281-287, April, 1998. https://doi.org/10.12671/jksf.1998.11.2.281
- http://cafe.naver.com/makerfac
- John Robert Honiballfdg "The Application of 3D Printing in reconstructive surgery," Dissertation presented in fulfilment of the requirements for the degree MscIng in Industrial Engineering at the University of Stellenbosch, March 2010.
- Gihyeon Kim, Ho-Joong Jung, Han-Jun Lee, Jae-Sung Lee, Seungbum Koo, Seung-Hwan Chang "Accuracy and Reliability of Length Measurements on Three-Dimensional Computed Tomography Using Open-Source OsiriX Software" Journal of Digital Imaging Volume 25, Number 4 486-491 0897-1889, 2012. https://doi.org/10.1007/s10278-012-9458-6
- Carlos Henrique Pereira Mello, Rafael Calandrin Martins, Bruno Rosa Parra, Edson de Oliveira Pamplona, Eduardo Gomes Salgado, Rodrigo Tavares Seguso "Systematic proposal to calculate price of prototypes manufactured through rapid prototyping an FDM 3D printer in a university lab" Rapid Prototyping Journal Volume 16, Issue 6 pp411-416 1355-2546, 2010.
- Mark Frame and James S. Huntley "Rapid Prototyping in Orthopaedic Surgery: A User''s Guide" The ScientificWorld Journal Volume 2012, Article ID 838575, 7 pages doi:10.1100/2012/838575, 2012.
- R. Petzold, H. F. Zeilhofer, and W. A. Kalender, ""Rapid prototyping technology in medicine-basics and applications,"" ComputerizedMedical Imaging and Graphics, vol. 23, no. 5, pp.277-284, 1999. https://doi.org/10.1016/S0895-6111(99)00025-7
- C. Hurson, A. Tansey, B. O''Donnchadha, P. Nicholson, J. Rice, and J. McElwain, ""Rapid prototyping in the assessment, classification and preoperative planning of acetabular fractures,"" Injury, vol. 38, no. 10, pp. 1158-1162, 2007. https://doi.org/10.1016/j.injury.2007.05.020
- S. D. Gittard, R. J. Narayan, J. Lusk et al., ""Rapid prototyping of scaphoid and lunate bones,"" Biotechnology Journal, vol. 4, no. 1, pp. 129-134, 2009. https://doi.org/10.1002/biot.200800233
- J. Guarino, S. Tennyson, G. McCain, L. Bond, K. Shea, and H. King, ""Rapid prototyping technology for surgeries of the pediatric spine and pelvis: benefits analysis,"" Journal of Pediatric Orthopaedics, vol. 27, no. 8, pp. 955-960, 2007. https://doi.org/10.1097/bpo.0b013e3181594ced
- V. Mironov, V. Kasyanov, C. Drake, and R. R. Markwald, ""Organ printing: promises and challenges,"" Regenerative Medicine, vol. 3, no. 1, pp. 93-103, 2008. https://doi.org/10.2217/17460751.3.1.93
피인용 문헌
- 3-Dimensional Printing for Mesh Types of Short Arm Cast by Using Computed Tomography vol.15, pp.1, 2015, https://doi.org/10.5392/JKCA.2015.15.01.308
- Customized Model Manufacturing for Patients with Pelvic Fracture using FDM 3D Printer vol.14, pp.11, 2014, https://doi.org/10.5392/JKCA.2014.14.11.370
- Usefulness of hard X-ray microscope using synchrotron radiation for the structure analysis of insects vol.81, pp.3, 2017, https://doi.org/10.1002/jemt.22978
- 적층제조기술 응용사례 및 최신기술동향 vol.6, pp.1, 2013, https://doi.org/10.22710/jict.2016.6.1.001
- 의료 영상을 이용한 인체 골 모형 제작의 3차원 프린팅 시스템 개발 vol.40, pp.3, 2013, https://doi.org/10.17946/jrst.2017.40.3.11
- 3차원 프린터 응용을 위한 CT/MRI-영상 기반 GUI소프트웨어 개발 vol.41, pp.5, 2013, https://doi.org/10.17946/jrst.2018.41.5.451
- 3D프린터를 이용한 CT 선량측정 팬텀 제작 및 비교에 관한 연구 vol.12, pp.6, 2018, https://doi.org/10.7742/jksr.2018.12.6.737