DOI QR코드

DOI QR Code

The Optimization using PCB EM interpretation of GEO satellite's L Band Converter

정지궤도위성용 L대역변환반의 PCB EM 해석을 통한 최적화

  • Received : 2013.05.21
  • Accepted : 2013.08.23
  • Published : 2013.08.30

Abstract

This study is the analysis and verification process of the L-band satellite communications repeater thought PCB & circuit EM analysis. System performance can be vulnerable to various spurious inside the L-band satellite transponder, power conversion board, digital signal board, TM/TC board, such as control panels and blocks that are linked signal components when the winch is increased due to the noise component. So the whole system can cause performance degradation. PCB resonance analysis and EM simulation can be easily analyzed for a variety of optimal. Also, by setting the ports on the PCB, H/W designer wants to can easily analyze system.

본 연구는 위성통신 중계기의 L대역변환반의 PCB EM 분석을 하고, 불요파에 대한 취약 부분에 대해 최적화하였다. 위성중계기 안에는 L대역변환반 뿐만 아니라 전원반, 디지털신호처리반, TM/TC 제어반 등 다양한 기능 및 블록이 연동될 때 윈치 않는 신호 성분으로 인해 잡음성분이 증가되어 전체 시스템 성능 저하를 야기 시킬 수 있다. EM 시뮬레이션 툴을 사용한 PCB 공진해석은 보드 상에서 공진에 취약할 수 있는 부분에 대해 쉽게 분석을 할 수 있고, 다양한 시뮬레이션을 통해 최적의 설계를 할 수 있다. 또한 PCB에 포트를 설정하여 원하는 블록을 쉽게 분석할 수 있는 장점이 있다.

Keywords

References

  1. Jong-Woon Yoo, "The study for PI/SI in High Speed Digital System", Sungkyunkwan University, 2009.
  2. Ansoft Si-Wave Simulation manual.
  3. Yong-Ju Kim, Han-Sub Yoon, Seongsoo Lee, Gyu Moon, Jongho Kim, and Jae-Kyung Wee, "An Efficient Path-Based Equivalent Circuit Model for Design, Synthesis, and Optimization of Power Distribution Networks in Multilayer Printed Circuit Boards", IEEE transactions on advanced packing, Vol. 27, No. 1, 2004.
  4. I. Novak, "Lossy power distribution network with thin dielectric layers and/or thin conductive layers", IEEE trans. Adv. package., Vol. 23, pp. 253-260, 2000.
  5. Tzong-Lin Wu, Senior Member, IEEE, Yen-Hui Lin, Ting-Kuang Wang, Chien-Chung Wang, and Sin-Ting Chen, "Electromagnetic Bandgap Power/Ground Planes for Wideband Suppression of Ground Bounce Noise and Radiated Emission in High-Speed Circuits", IEEE transactions on microwave theory and techniques, Vol. 53, No. 9, 2005.
  6. Shawn D. Rogers, "Electromagnetic-Bandgap Layers for Broad-Band Suppression of TEM Modes in Power Planes", IEEE transactions on microwave theory and techniques, Vol. 53, No. 8, 2005.
  7. Mu-Shui Zhang, Yu-Shan Li, Li-Ping Li, Chen Jia, Jian Pan, Jian-Min Lu, Song Gao, Dong-Chu Jiang, "An Efficient Power-Delivery Method for the Design of the Power Distribution Networks for High-Speed Digital Systems", IEEE transactions on microwave theory and techniques, Vol. 57, No. 3, 2009.
  8. Harizi H., Fischer H., Olbrich M., Barke E., "Efficient and fast analysis of power distribution networks", Industrial Electronics & Applications, Vol. 1, 2009.
  9. Musselman R., Killpack S., Killion B., Herbort E., Kim P., Todd R. , "Broadband-interference rejection for mobile satellite communications" Wireless Information Technology and Systems (ICWITS), IEEE International Conference on Digital Object Identifier, 2010.
  10. Min-Ho Go, "Design and Fabrication of wid eband low-noise amplification stage for COMINT", The Journal of The Korea Institute of Electronic Communication Sciences, Vol. 7, No. 2, pp. 221-226, 2012.
  11. Min-Ho Go, Seung-chul Pyo, Hyo-dal Park, "Study on the Broadband RF Front-End Architecture", The Journal of The Korea Institute of Electronic Communication Sciences, Vol. 4, No 3, pp. 183-189, 2009.
  12. Jin-won Lim, Tae-jin Kim, Ju-nam Park, Young-chul Rhee, "Implementation of Ka-band Low Noise Block Converter For Satellite TVRO", The Journal of The Korea Institute of Electronic Communication Sciences, Vol. 3, No 3, pp. 97-104, 2008.
  13. Min-ho Go, Hyun-sik Shin, Hyo-dal Park, "A RF Module for digital terrestrial and multistandard reception", The Journal of The Korea Institute of Electronic Communication Sciences, Vol. 1, No 1, pp. 16-27, 2006.