DOI QR코드

DOI QR Code

Developments and applications of a modified wall function for boundary layer flow simulations

  • Zhang, Jian (School of Civil Engineering, Beijing Jiaotong University) ;
  • Yang, Qingshan (School of Civil Engineering, Beijing Jiaotong University) ;
  • Li, Q.S. (Department of Civil and Architectural Engineering, City University of Hong Kong)
  • 투고 : 2012.02.21
  • 심사 : 2013.01.03
  • 발행 : 2013.10.25

초록

Wall functions have been widely used in computational fluid dynamics (CFD) simulations and can save significant computational costs compared to other near-wall flow treatment strategies. However, most of the existing wall functions were based on the asymptotic characteristics of near-wall flow quantities, which are inapplicable in complex and non-equilibrium flows. A modified wall function is thus derived in this study based on flow over a plate at zero-pressure gradient, instead of on the basis of asymptotic formulations. Turbulent kinetic energy generation ($G_P$), dissipation rate (${\varepsilon}$) and shear stress (${\tau}_{\omega}$) are composed together as the near-wall expressions. Performances of the modified wall function combined with the nonlinear realizable k-${\varepsilon}$ turbulence model are investigated in homogeneous equilibrium atmosphere boundary layer (ABL) and flow around a 6 m cube. The computational results and associated comparisons to available full-scale measurements show a clear improvement over the standard wall function, especially in reproducing the boundary layer flow. It is demonstrated through the two case studies that the modified wall function is indeed adaptive and can yield accurate prediction results, in spite of its simplicity.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Architectural Institute of Japan (2004), AIJ recommendations for loads on buildings Tokyo, Japan: Architectural Institute of Japan.
  2. Blocken, B. and Carmeliet, J. (2006), "The influence of the wind-blocking effect by a building on its wind-driven rain exposure", J. Wind Eng. Ind. Aerod., 94(2), 101-127. https://doi.org/10.1016/j.jweia.2005.11.001
  3. Castro, I.P. and Robins, A.G. (1977), "The flow around a surface-mounted cube in uniform and turbulent streams", J. Fluid Mech., 79(2), 307-335. https://doi.org/10.1017/S0022112077000172
  4. Craft, T.J. and Launder, B.E. (2001), "On the spreading mechanism of the three-dimensional turbulent wall jet", J. Fluid Mech., 435, 305-326.
  5. Easom, G. (2000), Improved turbulence models for computational wind engineering, Ph.D Thesis, University of Nottingham.
  6. Franke, J., Hirsch, C., Jensen, A.G., Krus, H.W., Schatzmann, M., Westbury, P.S., Miles, S.D., Wisse, J.A. and Wright, N.G. (2004), "Recommendations on the use of CFD in wind engineering", Proceedings of the International Conference on Urban Wind Engineering and Building Aerodynamics, (Ed. van Beeck JPAJ), COST Action C14, Impact of Wind and Storm on City Life Built Environment, von Karman Institute, Sint-Genesius-Rode, Belgium, May, 5 -7.
  7. Franke, J. and Frank, W. (2005), "Numerical simulation of the flow across an asymmetric street intersection", (Eds. Naprstek, J. and Fischer, C.), Proceedings of the 4EACWE, Prague, Czech Republic, July 11-15.
  8. Hargreaves, D.M. and Wright, N.G. (2007), "On the use of the k-$\varepsilon$ model in commercial CFD software to model the neutral atmospheric boundary layer", J. Wind Eng. Ind. Aerod., 95, 355-369. https://doi.org/10.1016/j.jweia.2006.08.002
  9. Mathews, E.H. (1987), "Prediction of the wind-generated pressure distribution around buildings", J. Wind Eng. Ind. Aerod., 25, 219-228. https://doi.org/10.1016/0167-6105(87)90018-3
  10. Miles, S. and Westbury, P. (2003), Practical tools for wind engineering in the built environment, QNET-CFD Network Newsletter.
  11. Murakami, S. (1998), "Overview of turbulence models applied in CWE-1997", J. Wind Eng. Ind. Aerod., 74-76, 1-24. https://doi.org/10.1016/S0167-6105(98)00004-X
  12. Murakami, S. (2002), "Setting the scene: CFD and symposium overview", Wind Struct., 5( 2-4), 83-88. https://doi.org/10.12989/was.2002.5.2_3_4.083
  13. Pope, S.B. (1975), "A more general eddy-viscosity hypothesis", J. Fluid Mech., 72, 331-340 https://doi.org/10.1017/S0022112075003382
  14. Richards, P.J. and Hoxey, R.P. (1993), "Appropriate boundary conditions for computational wind engineering models using the $\kappa-\varepsilon$ model", J. Wind Eng. Ind. Aerod., 46-47, 145-153. https://doi.org/10.1016/0167-6105(93)90124-7
  15. Riddle, A., Carruthers, D., Sharpe, A., McHugh, C. and Stocker, J. (2004), "Comparisons between FLUENT and ADMS for atmospheric dispersion modeling", Atmos. Environ., 38(7), 1029-1038. https://doi.org/10.1016/j.atmosenv.2003.10.052
  16. Speziale, C.G., Sarkar S. and Gatski T.B. (1991), "Modelling the pressure-strain correlation of turbulence: an invariant dynamical systems approach", J. Fluid Mech., 227, 245-272 https://doi.org/10.1017/S0022112091000101
  17. Walshe, J. (2003), CFD modelling of wind flow over complex and rough terrain, Ph.D. Thesis, University of Loughborough.
  18. Yang, W. (2004), Numerical study on structural wind loads and response based on RANS technique, Ph.D Thesis, Tongji University.
  19. Yang, W., Quan, Y., Jin, X., Tamura, Y. and Gu, M. (2008), "Influences of equilibrium atmosphere boundary layer and turbulence parameters on wind load distributions of low-rise buildings", J. Wind Eng. Ind. Aerod., 96(10-11), 2080-2092. https://doi.org/10.1016/j.jweia.2008.02.014

피인용 문헌

  1. Computational modeling of the atmospheric boundary layer using various two-equation turbulence models vol.19, pp.6, 2014, https://doi.org/10.12989/was.2014.19.6.687
  2. Mesoscale to microscale wind farm flow modeling and evaluation vol.6, pp.2, 2017, https://doi.org/10.1002/wene.214