The Transactions of The Korean Institute of Electrical Engineers (전기학회논문지)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지
DOI QR코드

DOI QR Code

Utilizing Technology in Measurement System for Catenary Current: - Focusing on Testing Results for Kyoungbu High-speed Line in Korea -

조가선 전류 검측 시스템의 활용기술 연구 - 고속선 경부2단계 시험결과를 중심으로 -

  • Park, Young (High-speed Railroad Infrastructure System Research Team, KRRI) ;
  • Jung, Hosung (Intermodal Transfer Systems Research Team, KRR) ;
  • Lee, Kiwon (High-speed Railroad Infrastructure System Research Team, KRRI)
  • Received : 2013.08.22
  • Accepted : 2013.09.17
  • Published : 2013.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

The resent developed high speed train called HEMU-430X (Highspeed Electric Multiple Unit - 430km/h eXperiment) recorded a 421.4 km/h in Kyoungbu high speed line in Korea. A verity of measurement systems are used to check the performance between pantograph and catenary system. An innovative measurement system is adopted to check the current of catenary wire in the track side during HEMU-430X test running. This paper presents the measurement results of catenary current in kyoungbu high-speed line and describe its utilizing technology in the experimental results of catenary current. In order to analyze field testing results, the current ratio between contact and catenary current have been analyzed by means of Carson-Pollaczek equation. And the current wave forms between catenary and contact wire are presented based on the simulation results.

Keywords

References

  1. K. Y. Um, Y. G. Park, S. H. Lee, "Development of Test-bed and Infra Technologies for 400 km/h High Speed Railway", Railway Journal, Vol. 15, No. 4, pp. 55-60, 2012. 8.
  2. Y. Kim, H. Li, M. Kang, J. M. Koo, C. S. Seok, K, Lee, S. Y. Kwon, "Bending Fatigue Life Evaluation of Pure Copper and Copper Alloy Contact Wire", Journal of the Korean Society for Precision Engineering, Vol. 29, No. 12, pp. 1346-1350, 2012. 12. https://doi.org/10.7736/KSPE.2012.29.12.1346
  3. Korean Railway Standards, "Hard-drawn Copper Round Trolley Wire", 2006. 5.
  4. Korean Railway Standards, "Grooved Contact Wire Cu-Sn $150mm^{2}$", 2013. 8.
  5. I. K. Kang, "Contact Lines for Electric Railways", Sungandang, p. 5, 2006.
  6. H. Jung, S. Kwon, Y. Park, "A Study on Deicing Currnet Estimation Technique and Configuration Process for Deicing System in the Conventional Line", Journal of The Korean Society for Railway, Vol 9, No 2, pp. 237-243, 2006. 2.
  7. S. Y. Oh, Y. Park, Y. H. Cho, K. Lee, J. T. Song, "Implementation of Electrical Property Assessment System for Overhead Contact Lines", Journal of the Korean institute of electronic material engineers , Vol 24, No 6, pp. 497-503, 2011. 6. https://doi.org/10.4313/JKEM.2011.24.6.497
  8. S. Kwon, H. S. Jung, Y. Park, H. J. Park "A Study about Current Ratio between Catenary and Contact wire in Overhead Contact Line", Korean rail technology, Vol. 4, pp. 28-33, 2005.
  9. Y. Park, Y. H. Cho, K. Lee, S. Kwon, "Future Research Direction in Nanotechnology to Improvement of Railway System", Proceeding of the KIEEME Annual Summer Conference 2011, Vol. 12, p. 142. 2011. 6.
  10. H. K. Na, Y. Park, Y. H. Cho, K. Lee, H. J. Park, S. Y. Oh, J. T. Song, "Characteristic Measurement by a Real-time Data Acquisition System in Overhead Contact Wire", Journal of the Korean institute of electronic material engineers, Vol 20, No 3, pp. 281-285, 2007. https://doi.org/10.4313/JKEM.2007.20.3.281
  11. Y. Park, S. K. Shin, K. Lee, J. Kim, W. Kim, "Analysis of Current Performance using Real-time Measurement of Current for Overhead Contact Line on the Track-side", The Transactions of the Korean Institute of Electrical Engineers, Vol. 62, No 4, pp. 573-576, 2013. 4. https://doi.org/10.5370/KIEE.2013.62.4.573