정보저장시스템학회논문집 (Transactions of the Society of Information Storage Systems)

  • 제9권2호
  • /
  • Pages.32-35
  • /
  • 2013
  • /
  • 1738-6845(pISSN)
  • /
  • 2288-2022(eISSN)
정보저장시스템학회 (The Society of Information Storage Systems)
권호 표지
DOI QR코드

DOI QR Code

하드 디스크 드라이브 비 동작 충격 시에 내부 파트들의 동 특성에 대한 연구

A study on dynamic behavior of inner parts with non-operational shock in hard disk drive

  • Choi, Yong-Ho (School of Mechanical Engineering, Yonsei Univ.) ;
  • Choi, Jonghak (School of Mechanical Engineering, Yonsei Univ.) ;
  • Lim, Gun-Yeop (School of Mechanical Engineering, Yonsei Univ.) ;
  • Seo, Junho (School of Mechanical Engineering, Yonsei Univ.) ;
  • Park, No-Cheol (School of Mechanical Engineering, Yonsei Univ.)
  • 투고 : 2013.09.13
  • 심사 : 2013.09.22
  • 발행 : 2013.09.25
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Nowadays, function related to anti-vibration and anti-shock of storage devices is required because of portability. Therefore, many hard disk drive (HDD) studies about external shock and vibration have been performed. Especially, many studies are performed with non-operational shock. Most studies have used the fixed condition between spindle system and base when they wanted to analyze dynamic behavior of inner parts in simulation. But spindle system has actually stiffness and damping coefficient. Maybe difference of value would be happened between fixed condition and spring condition. So, we measured FRF of spindle system to know stiffness and damping coefficient in HDD. And we studied on dynamic behavior of inner parts by using calculated stiffness and damping coefficient. As a result, we confirmed the difference as boundary condition of spindle system.

키워드

참고문헌

  1. A. N. Murthy, B. Feliss, D. Gillis and F. E. Talke, 2006, "Experimental and numerical investigation of shock response in 3.5 and 2.5 in. form factor hard disk drives", Microsystem Technologies, Vol. 12, Issue 12, pp.1109-1116 https://doi.org/10.1007/s00542-006-0232-x
  2. ] H. Zheng, A. N. Murthy, E. B. Fanslau Jr, F. E. Talke, 2006, "Effect of suspension design on the non-operational shock response in a load/unload hard disk drive", Microsystem Technologies, Vol. 16, Issue 1-2, pp.267-271
  3. B. Feliss, A. N. Murthy and F. E. Talke, 2007, "Microdrive operational and non-operational shock and vibration testing", Microsystem Technologies, Vol. 13, Issue 8-10, pp.1015-1021 https://doi.org/10.1007/s00542-006-0308-7
  4. S. Sharma, M. Virmani and T.L. Geers, 2007, "Direct Comparison of Computational and Experimental Head-Slap Data for a Nonoperating Hard Disk Drive", IEEE TRANSACTIONS ON MAGNETICS, Vol. 43, No. 3, pp.1093-1099 https://doi.org/10.1109/TMAG.2006.888859
  5. Gang Sheng Chen., and Cheng-fu Chen., Terrence Wilburn., 2012, "A study of non-operational dynamic responses of disk in 3.5 in. hard disk drive to impact load," Microsystem Technologies, Vol. 18, pp.1261-1266 https://doi.org/10.1007/s00542-012-1517-x
  6. en-Yuan Chang., and Rana Noman Mubarak.,2012, "Non-operational shock analysis and design of head gimbal assembly in spinning data storage devices," Microsystem Technologies, Vol. 18, pp.1463-1468 https://doi.org/10.1007/s00542-012-1572-3
  7. S. Kim, G. Lim, N.C. Park, Y.P. Park and K.S. Park, 2012, "Analysis of Touch Phenomena between Disk and Head Gimbal Assembly in Operational Shock", 2012 ASME-ISPS /JSME-IIP Joint International Conference on Micromechatronics for Information and Precision Equipment MIPE2012, pp.93-95