Abstract
The cutting area changes periodically in the end-milling process because of its form generation mechanism. In this study, the effects of the cutting area on end-milled side walls are studied by developing a cutting area model that simulates the area formed by engagement between a workpiece and a cutting edge of the end mill. To do this, the straightness profile of the side wall in the axial direction is investigated. Models for estimating the cutting area and the transition point, where the slope of the straightness profile changes suddenly, are verified from real end-milling experiments under various radial and axial depth of cut conditions. Through this study, it is confirmed that the final end-milled side wall is generated in the regions where cutting areas are constant and decreasing in the down-cut. Similarly, in stable up-cut, it is also generated in the regions where cutting areas are increasing and constant. It is found that the transition point appears when the region changes.
엔드밀링 공정은 형상창성기구의 특성 상, 절삭면적의 주기적인 변화를 피할 수 없다. 그러므로, 본 연구에서는, 가공 중 절삭날과 공작물 사이의 간섭영역에 해당하는 절삭면적의 모델을 확립하여, 가공면 형상 특성과 절삭면적의 관계를 규명하고자 한다. 대상 가공면은 측벽을 선정하였으며, 형상 특성은 축 방향 진직도를 선택하였다. 절삭면적 및 축방향 진직도에 영향을 미치는 특이점 추정 모델의 타당성은 반경 방향 및 축 방향 절삭깊이를 변화시키며 엔드밀링 가공을 수행하여 검증하였다. 연구 결과, 배분력이 음의 값을 갖지 않는 안정적인 엔드밀링 가공의 경우, 상향절삭은 절삭면적이 증가했다. 일정해지는 영역에서, 하향절삭은 절삭면적이 일정했다 감소하는 영역에서 가공면을 창성하며, 영역이 변화될 때 가공면에 특이점이 발생하는 것이 확인되었다.