DOI QR코드

DOI QR Code

Tolerance Optimization of Design Variables in Lower Arm by Using Response Surface Model and Process Capability Index

반응표면모델과 공정능력지수를 적용한 로워암 설계변수의 공차최적화

  • Received : 2013.03.22
  • Accepted : 2013.07.25
  • Published : 2013.10.01

Abstract

In the lower arm design process, a tolerance optimization of the variance of design variables should be preceded before manufacturing process, since it is very cost-effective compared to a strict management of tolerance of products. In this study, a design of experiment (DOE) based on response surface model (RSM) was carried out to find optimized design variables of the lower arm, which can meet a given requirement of probability constraint for the process capability index (Cpk) of the weight and maximum stress. Then, the design space was explored by using the central composite design method, in which the 2nd order Taylor expansion was applied to predict a standard deviation of the responses. The optimal solutions satisfying the probability constraint of the Cpk were found by considering both of the mean value and the standard deviation of the design variables.

Keywords

References

  1. Lee, R.W., Chung, H.S., Jee, H.S. and Yim, H.J., 2012, Tolerance Design for Parts of a Sliding-Type Mobile Phone to Improve Variational Quality of Its Side Gap, Transactions of CAD/CAM Engineers, 17(6), pp.398-408. https://doi.org/10.7315/CADCAM.2012.398
  2. Lee, K.K., Park, C.K. and Han, S.H., 2010, Robust Design of Railway Vehicle Suspension Using a Process Capability Index, Journal of Mechanical Science and Technology, 24(1), pp.215-218. https://doi.org/10.1007/s12206-009-1131-8
  3. Lee, K.K. and Han, S.H., 2010, Development of Computational Orthogonal Array Based Fatigue Life Prediction Model for Shape Optimization of Turbine Blade, Trans. of the KSME(A), 34(5), pp.611-617. https://doi.org/10.3795/KSME-A.2010.34.5.611
  4. Ribardo, C. and Allen, T.T., 2003, An Alternative Desirability Function for Achieving Six Sigma Quality, Quality and Reliability Engineering International, 19(3), pp.1-14. https://doi.org/10.1002/qre.510
  5. Lee, K.K. and Han, S.H., 2011, Multi-level Shape Optimization of Lower Arm by Using TOPSIS and Computational Orthogonal Array, Journal of the Korean Society of Precision Engineering, 28(4), pp.482-489.
  6. Shina, S.G., 2002, Six Sigma for Electronics Design and Manufacturing, McGraw-Hill.
  7. Chen, W., Allen, J.K., Tsui, K.L. and Mistree, F., 1996, A Procedure for Robust Design: Minimizing Variations Caused by Noise Factors and Control Factors, Transactions of the ASME, 118, pp.478-485.
  8. Mason, R.L., Gunst, R.F. and Hess, J.L., 2003, Statistical Design and Analysis of Experiments, John Wiley & Sons, Inc., Hoboken, New Jersey, pp.582-585.
  9. Myers, R.H. and Montgomery, D.C., 1995, Response Surface Methodology - Process and Product Optimization Using Designed Experiments, John Wiley & Sons, New York.
  10. Rasem, E.H. and Raid, A.A., 2006, Simulationbased Lean Six-sigma and Design for Six-sigma, John Wiley & Sons, Inc., Hoboken, New Jersey.
  11. Taylor, W.A., 1992, Optimization & Variation Reduction in Quality, McGraw-Hill.
  12. Derringer, G.C., 1994, A Balancing Act: Optimizing a Product's Properties, Quality Progress, 27(6), pp.51-58.
  13. Derringer, D. and Suich, R., 1980, Simultaneous Optimization of Several Response Variables, Journal of Quality Technology, 12(4), pp.214-219.
  14. SAS Institute Inc., 2012, JMP 10 Modeling and Multivariate Methods, http://www.sas.com.