소성∙가공 (Transactions of Materials Processing)

  • 제22권5호
  • /
  • Pages.264-268
  • /
  • 2013
  • /
  • 1225-696X(pISSN)
  • /
  • 2287-6359(eISSN)
한국소성∙가공학회 (The Korean Society for Technology of Plasticity and materials processing)
권호 표지
DOI QR코드

DOI QR Code

3527/4343 알루미늄 클래드재의 인장 및 침식특성에 미치는 미세조직 제어의 영향

Effect of Microstructure Control on the Tensile and Erosion Properties of 3527/4343 Aluminum Clad

  • 투고 : 2013.06.19
  • 심사 : 2013.07.15
  • 발행 : 2013.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Aluminum clad sheets for brazing materials in the automotive heat exchangers are required to exhibit both high strength and excellent erosion resistance. In this study, the effects of microstructural changes on the property of clad sheets due to thermomechanical treatment were investigated. The clad sheets were fabricated by roll bonding of twin-roll-cast AA3527 and AA4343 alloys followed by cold rolling down to a thickness of 0.22mm. Partial or full annealing was conducted at the final thickness in order to improved the erosion resistance while keeping the proper strength. Since full annealing was achieved for a temperature of $400^{\circ}C$, annealing treatments were performed at 360, 380, and $400^{\circ}C$, respectively. The tensile strength of 3527/4343 clad material was found to be inversely proportional to the annealing temperature before the brazing heat treatment. After this latter treatment, however, the tensile strength of the clad material was about 195~200MPa regardless of the annealing temperature. The erosion depth ratio of the clad annealed at $400^{\circ}C$ was 8.8% (the lowest), while that of the clad annealed at $380^{\circ}C$ was 17% (the highest). The effect of annealing temperature on the tensile and erosion properties of 3527/4343 aluminum clad sheets was elucidated by means of microstructural analyses.

키워드

과제정보

연구 과제 주관 기관 : 산업기술연구회

참고문헌

  1. W. S. Miller, L. Zhuang, J. Bottema, A. J. Wittebrood, P. De Smet, A. Haszler, 2000, Recent Development in Aluminium Alloys for the Automotive Industry, Mater. Sci. Eng., A, Vol. 280, No. 1, pp. 37-49. https://doi.org/10.1016/S0921-5093(99)00653-X
  2. K. Euh, J.-H. Kang, S.-H. Kim, H.-W. Kim, D. B. Kim, 2010, Proc. 12th Inter. Conf. Aluminium Alloys(editors: S. Kumai, O. Umezawa, Y. Takayama, T. Tsuchida, T. Sato), The Japan Institute of Light Metals, Tokyo, Japan, pp. 1668-1672.
  3. S. H. Lee, J. S. Yoon, M. S. Kim, D. Jung, 2002, Effects of Cold Rolling Parameters on Sagging Behavior for Three Layer Al-Si/Al-Mn(Zn)/Al-Si Brazing Sheets, Met. Mater. Int., Vol. 8, No. 3, pp. 227-232. https://doi.org/10.1007/BF03186089
  4. Aluminum Brazing Handbook, 1979, 3rd ed., Aluminum Association, Washington DC.
  5. G. J. Marshall, R. K. Bolingbroke, A. Gray, 1993, Microstructural Control in an Aluminum Core Alloy for Brazing Sheet Applications, Metall. Trans. A, Vol. 24, No. 9, pp. 1935-1942. https://doi.org/10.1007/BF02666328
  6. K. Euh, S.-H. Kim, H.-W. Kim, 2011, Proc. Euro. Conf. Aluminium Alloys(editor: J. Hirsh), Deutsch Gesellschaft fur Materialkunde e.V., Frankfurt, Germany, pp. 61-63.
  7. K. Euh, H.-W. Kim, S.-H. Kim, D. B. Kim, E. Baek, Y. -M. Oh, 2013, Proc. TMS2013(editor: W. Schneider), TMS, San Antonio, USA., p. 232.
  8. S. S. Park, D. S. Bae, J. H. Lee, D. H. Bae, 2007, Development of New Bimetal Materials, for, Home Appliances by Using the Rolling Process, Trans. Mater. Process., Vol. 16, No. 5, pp. 375-380. https://doi.org/10.5228/KSPP.2007.16.5.375
  9. ASTM Standard Test Methods for Tension Testing of Metallic Materials, ASTM E8/E8M, PA, ASTM International.
  10. K. Euh, S.-H. Kim, H.-W. Kim, 2013, Proc. Aluminium 2000(editor: W. D. Barba), Interall srl, Modena, Italy, pp. 1-5.

피인용 문헌

  1. Properties of Aluminum Clad Sheets for Condenser Fins Fabricated with Transition Elements(Cu, Cr) added to Al-1.4Mn-1.0Zn Base Alloys vol.23, pp.6, 2014, https://doi.org/10.5228/KSTP.2014.23.6.386
  2. Hot Rolling of Flame Retardant Magnesium and Aluminum Alloys to Produce a Cladding Plate vol.19, pp.4, 2018, https://doi.org/10.1007/s12541-018-0063-6