한국지반공학회논문집 (Journal of the Korean Geotechnical Society)

  • 제29권8호
  • /
  • Pages.5-14
  • /
  • 2013
  • /
  • 1229-2427(pISSN)
  • /
  • 2288-646X(eISSN)
한국지반공학회 (Korean Geotechnical Society)
권호 표지
DOI QR코드

DOI QR Code

조립재료의 입도특성에 따른 동적 변형특성 평가

Dynamic Deformation Properties of Coarse Granular Materials with Respect to Gradation Characteristics

  • 투고 : 2012.06.26
  • 심사 : 2013.08.13
  • 발행 : 2013.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

굵은 자갈 이상의 대입경 입자를 포함하는 조립질 지반재료는 댐, 제방, 철도 등 대형 지반구조물의 성토 및 채움재료로 널리 사용되며, 이러한 구조물의 동적 해석을 위해서는 축조재료의 변형특성에 대한 엄밀한 평가가 필수적이다. 본 연구에서는 대입경 조립재료의 동적 변형특성 평가를 위하여 지름 200mm, 높이 400mm의 공시체에 대한 시험이 가능하도록 개발된 대형 공진주시험기를 활용하여 댐 축조용 사력재의 최대전단탄성계수, 전단탄성계수감소곡선 및 감쇠비를 평가하였으며, 재료의 최대입경과 균등계수와 같은 입도분포특성이 재료의 변형특성에 미치는 영향을 확인하였다. 재료의 입경이 동적 변형특성에 미치는 영향을 평가한 결과, 동일한 균등계수에서 평균입경의 범위에 따른 전단탄성계수감소곡선에 차이가 발생함을 확인하였다. 동일한 최대입경에 대하여 균등계수를 달리하는 경우 균등계수에 따라 최대전단탄성계수의 구속압 영향계수가 증가함을 확인하였다. 결과적으로 조립재료의 입도 특성 중 최대입경은 전단탄성계수감소곡선을, 균등계수는 미소변형영역의 구속압 영향계수에 대한 영향요소임을 확인하였으며, 조립재료의 동적 변형특성을 엄밀히 평가하기 위한 대형 공진주시험기의 효용성을 확인하였다.

Coarse granular geomaterials containing large gravels are broadly used for construction of large geotechnical systems such as dams, levees, railways and backfills. It is necessary to evaluate deformation characteristics of these materials for dynamic analysis, e.g. seismic design. This study presents evaluation of dynamic deformation characteristics of coarse materials using large scale resonant column testing apparatus, which uses specimens with 200 mm in diameter and 400 mm in height, and the effects of gradation characteristics on maximum shear modulus, shear modulus reduction curve and damping characteristics were investigated. From experimental study using rock-fill materials for a dam, we could see that the largest or mean particle size affects the shape of shear modulus reduction curve. When the specimens are prepared under the same conditions for maximum particle size, the coefficient of uniformity affects the confining stress exponent of maximum shear modulus. It could be concluded that the maximum particle size is an factor which affects shear modulus reduction curve, and that the coefficient of uniformity is for small strain shear modulus, especially for the sensitivity to confining stress.

키워드

참고문헌

  1. American Society for Testing and Materials (ASTM) (2003), "Standard test methods for modulus and damping of soils by resonant-column method", ASTM D4015, Philadelphia.
  2. Cho, G.C., Dodds, J., and Santamarina, J.C. (2006), "Particle shape effects on packing density, stiffness, and strength: natural and crushed sands", Journal of Geotechnical and Geoenvironmental Engineering, Vol.132, No.5, pp.591-602. https://doi.org/10.1061/(ASCE)1090-0241(2006)132:5(591)
  3. Hardin, B.O. (1978), "The nature of stress-strain behavior of soils", Proceedings of the ASCE Specialty Conference on Earthquake Engineering and Soil Dynamics, Pasadena, CA, ASCE, New York, pp.3-90.
  4. Hardin, B.O. and Blandford, G.E. (1989), "Elasticity of Particulate Materials", Journal of Geotechnical and Geoenvironmental Engineering, Vol.115, No.6, pp.788-805. https://doi.org/10.1061/(ASCE)0733-9410(1989)115:6(788)
  5. Hardin, B.O. and Kalinski, M.E. (2005), "Estimating the shear wave modulus of gravelly soils", Journal of Geotechnical and Geoenvironmental Engineering, Vol.131, No.7, pp.867-875. https://doi.org/10.1061/(ASCE)1090-0241(2005)131:7(867)
  6. Jin, G.R., Shin, D.H., Im, E.S., and Kim, K.Y. (2009), "Characteristics of deformation and shear strength of parallel grading coarse-grained materials using large triaxial test equipment", Journal of Korean Geotechnical Society, Vol.25, No.12, pp.57-67.
  7. Lee, D.S., Kim, K.Y., Hong, S.Y., and Hwang, S.C. (2006), "Characteristic of shear behavior of coarse grained materials based on large scale direct shear test (II)", Journal of Korean Geotechnical Society, Vol.22, No.4, pp.51-59.
  8. Lee, S.H, Kim, D.S., Choo, Y.W., and Kwon, H.K. (2009), "Estimation of dynamic material properties for fill dam : II. Nonlinear Deformation Characteristics", Journal of Korean Geotechnical Society, Vol.25, No.12, pp.87-105.
  9. Lee, S.J., Choo, Y.W., Hwang, S.B., and Kim, K.J. (2012), "Test method for Young's modulus of parallel graded coarse granular materials by large triaxial test", Journal of the Korean Society of Civil Engineers, Vol.32, No.5C, pp.211-220. https://doi.org/10.12652/Ksce.2012.32.5C.211
  10. Lowe, J. (1964), "Shear strength of coarse embankment dam materials", Proceedings of 8th Congress on Large Dams, pp.745-761.
  11. Marachi, N.D., Chan, C.K., and Seed, H.B. (1972), "Evaluation of properties of rockfill materials", Journal of Soil Mechanics and Foundations Engineering, ASCE, Vol.98, No.SM1, pp.95-114.
  12. Menq (2003), "Dynamic properties of sandy and gravelly soils", Ph.D dissertation, the University of Texas at Austin, Austin, TX.
  13. Rollins, K.M., Evans, M.D., Diehl, N.B., and Daily, W.D. (1998), "Shear modulus and damping relationships for gravels", Journal of Geotechnical and Geoenvironmental Engineering, Vol.124, No.5, pp.396-405. https://doi.org/10.1061/(ASCE)1090-0241(1998)124:5(396)
  14. Seed, H.B., Wong, R.T., Idriss, I.M., and Tokimatsu, K. (1984), "Moduli and damping factors for dynamic analyses of cohesionless soils", Rep. No. EERC 84-14, Earthquake Engineering Research Center, Univ. of California, Berkeley, CA.
  15. Seo, M.W., Ha, I.S., and Kim, B.J. (2007), "Effect of particle size and test equipments on shear behavior of coarse materials", Journal of the Korean Society of Civil Engineers, Vol.27, No.6C, pp.393-400.
  16. Seo, M.W., Shin, D.H., Ha, I.S, and Park, H.G. (2006), "Evaluation of shear behavior of crushed rock and sand/gravel materials using large triaxial testing equipment", KGS Fall Conference 2006, pp. 844-853.
  17. Shin, D.H. (2001), "Shear strength characteristics of rockfill materials using large triaxial testing apparatus", Rep. No. WRRI-GT-01-2, Korea Water Resources Corporation.
  18. Stokoe, K.H., Darendeli, M.B., Menq, F.Y., and Choi, W.K. (2004), "Comparison of the linear and nonlinear dynamic properties of gravels, ands, silts and clays", Proceedings of 11th SDEE and 3rd ICEGE, pp.1-4.