References
- Inoue S, Aida T. Ring-opening polymerization, McGraw-Hill, New York (1967).
- Lee SD, Takata T, Endo T. Arenesulfonates as non-salt-type latent thermal initiators for cationic polymerization. Macromolecules, 29, 3317 (1996). http://dx.doi.org/10.1021/ma950813l.
- Abu-Abdoun II, Aale A. Cationic photopolymerization of cyclohexene oxide. Eur Polym J, 28, 73 (1992). http://dx.doi.org/http://dx.doi.org/10.1016/0014-3057(92)90239-X.
- May CA. Epoxy resins: chemistry and technology, 2nd ed., Marcel Dekker, New York (1988).
- Crivello JV, Lam JHW. Photoinitiated cationic polymerization by dialkyl-4-hydroxyphenylsulfonium salts. J Polym Sci A, 18, 1021 (1980). http://dx.doi.org/10.1002/pol.1980.170180321.
- Gu J, Narang SC, Pearce EM. Curing of epoxy resins with diphenyliodonium salts as thermal initiators. J Appl Polym Sci, 30, 2997 (1985). http://dx.doi.org/10.1002/app.1985.070300722.
- Lee H, Neville K. Handbook of epoxy resins, McGraw-Hill, New York (1967).
- Senturia S, Sheppard N Jr. Dielectric analysis of thermoset cure. In: Dusek K, ed. Epoxy resins and composites IV, Advances in Polymer Science Vol. 80, Springer, Berlin, 1 (1986). http://dx.doi.org/10.1007/3-540-16423-5_11.
-
Lee SB, Takata T, Endo T. (
$\rho$ -Methoxybenzyl)- and ($\alpha$ -methylbenzyl)-$\rho$ -cyanopyridinium hexafluoroantimonates: activated latent thermal catalysts. Macromolecules, 23, 431 (1990). http://dx.doi.org/10.1021/ma00204a014. - Park SJ, Seo MK, Lee JR. Isothermal cure kinetics of epoxy/phenol-novolac resin blend system initiated by cationic latent thermal catalyst. J Polym Sci A, 38, 2945 (2000). http://dx.doi.org/10.1002/1099-0518(20000815)38:16<2945::AIDPOLA120>3.0.CO;2-6.
- Reich B. Reliability of plastic encapsulated semiconductor devices and integrated circuits. Solid State Technol, 21, 82 (1978).
- Melliar-Smith CM, Matsuoka S, Hubbauer P. Plastic encapsulation of silicon integrated circuits, Plast Rubber Mater Appl, 5, 49 (1980).
- Park SJ, Seo MK, Lee JR, Lee DR. Studies on epoxy resins cured by cationic latent thermal catalysts: the effect of the catalysts on the thermal, rheological, and mechanical properties. J Polym Sci A, 39, 187 (2001). http://dx.doi.org/10.1002/1099-0518(20010101)39:1<187::AID-POLA210>3.0.CO;2-H.
- Seo MK, Park SJ. Influence of oxyfluorination on physicochemical characteristics of carbon fibers and their reinforced epoxy composites. Macromol Res, 17, 430 (2009). http://dx.doi.org/10.1007/BF03218885.
- Park SJ, Seo MK. Interface science and composite, Interface science and technology Vol. 18, Elsevier, Amsterdam (2011).
- Griffith AA. The phenomena of rupture and flow in solids. Phil Trans R Soc Lond A, 221, 163 (1921). http://dx.doi.org/10.1098/rsta.1921.0006.
- Lee JH, Lee JS, Rhee KY. Effects of oil absorption on the wear behaviors of carbon/epoxy woven composites. Carbon Lett, 12, 249 (2011). http://dx.doi.org/10.5714/CL.2011.12.4.249.
- Morgan P. Carbon fibers and their composites. Taylor & Francis, Boca Raton (2005).
- Dowling NE. Mechanical behavior of materials: engineering methods for deformation, fracture, and fatigue. Prentice Hall, Englewood Cliffs (1993).
Cited by
- Superhydrophobic carbon-based materials: a review of synthesis, structure, and applications vol.15, pp.2, 2014, https://doi.org/10.5714/CL.2014.15.2.089
- Preparation and characterization of carbon fiber-reinforced thermosetting composites: a review vol.16, pp.2, 2015, https://doi.org/10.5714/CL.2015.16.2.067
- A review: synthesis and applications of graphene/chitosan nanocomposites vol.17, pp.1, 2016, https://doi.org/10.5714/CL.2016.17.1.011
- Effect of Ozone Treatment on Fracture Toughness of Single-Walled Carbon Nanotubes-Reinforced Epoxy Resin Initiated by a Thermal Latent Catalyst pp.2092-7673, 2018, https://doi.org/10.1007/s13233-018-6138-5