Abstract
The procedures and relevant programs developed for analyzing mechanical load data of wind turbine generator systems, which are obtained through type certification tests, are verified. The following issues according to IEC 61400-13 are covered in the developed programs: data validation, time series analysis, summary load statistics, generation of fatigue load spectra, and estimation of equivalent loads. A capture matrix for normal power production is generated to determine whether the collected data sets are sufficient to carry out fatigue analysis. Fatigue load spectra are obtained through the rainflow counting method using 50 load ranges; finally, equivalent loads are calculated using different S-N curve slopes, m, according to the relevant materials. Case studies are performed using aero-elastic simulation data of the NREL 5 MW baseline wind turbine with a monopile foundation.
형식인증시험을 통해 획득된 풍력발전기의 기계적 하중 데이터를 분석하기 위한 관련 프로그램 개발과 절차가 수행되었다. IEC 61400-13 규격을 기반으로 하는 측정 데이터에 대한 검증, 하중유형에 따른 분류, 시계열 및 통계 데이터 분석, 파워 스펙트럼 밀도함수 및 피로하중 스펙트럼 계산, 등가하중 계산 등의 절차가 본 프로그램을 통해 수행되었다. 수집된 데이터들이 피로하중을 산정하기에 충분한가를 판단하기 위해 정상전력생산의 경우에 대한 수집행렬을 구성하였다. 50 개의 하중 범위 분할 개수를 사용하는 우수집계법을 통해 피로하중 스펙트럼이 얻어지며, 사용된 재료에 따라 다르게 S-N 선도의 기울기를 적용하여 최종적으로 등가하중을 산출하였다. 모노파일 하부구조를 가지는 NREL 5MW 풍력발전기의 공탄성 시뮬레이션 데이터에 이용하여 위의 전반적인 절차를 수행하였다.