References
- Doosan Infracore Construction Equipment (2013). Data of the DX 300LCA (in Korean).
- EPA (2004). NONROAD2005 Model, U.S. Environmental Protection Agency, http://www.epa.gov/otaq/models/nonrdmdl/nr-arch.htm.
- Frey, H. C., Rasdorf, W., Kim, K., Pang, S. H. and Lewis, P. (2008). "CRC On-Road Vehicle Emissions Workshop." March 31 to April 2, 2008.
- Ghil, J. H. (2010). A study on estimation of automobile emissions by the portable emission measurement system, MSc Dissertation, Inha University, Incheon (in Korean).
- IPCC (2008). 2006 Guideline to make inventories of nation greenhouse gas.
-
Jang, W. S. and Kim, B. S. (2013). "The application of
$CO_{2}$ and hydrometer sensor for development of real time measuring method on$CO_{2}$ emission of construction equipment." Korea Institute Construction Engineering Management, Vol. 14, No. 2, pp. 78-86 (in Korean). https://doi.org/10.6106/KJCEM.2013.14.2.078 - Kim, J. H. (2011). Automobile diesel engine, 1st ed. Goldenbell, Seoul (in Korean).
-
Kim, T. H. (2007). Estimation of emissions of carbon dioxide (
$CO_{2}$ ) in the metropolitan area and the necessity of developing the learning materials for its reduction, MSc Dissertation, Korea National University of Education, Chung- Buk, p. 19 (in Korean). - Kwon, S. H. (2008). Development of assessment model for environmental economics of construction projects, Ph.D. Dissertation, Chung-Ang University, Seoul (in Korean).
- Lee, J.-Y., Jung, W.-S. and Hwang, I.-H. (2011). "The evaluation of GHG emission in railroad construction sector." Journal of KSR, KSR, Vol. 14, No. 3, pp. 271-275 (in Korean).
- Lee, M. G., Park, Y. G., Yoo, J. J., Sung, H. G. and Jung, K. K. (2010). "An analysis of the relationship between engine RPM and fuel construction on a real vehicle." Proceeding of the ITFE Conference, pp. 3-6 (in Korean).
- Lee, T. W. (2010). Study on methodology of emission factors development for vehicles based on on-road measurements, Ph. D. Dissertation, Inha University, Incheon (in Korean).
- Lim, J. H., Jung, S. W., Lee, T. W., Kim, J. C., Seo, C. Y., Ryu, J. H., Hwang, J. W., Kim, S. M. and Eom, D. S. (2009). "A study on calculation of air pollutants emission factors for construction equipment." Journal of Korean Society for Atmospheric Envronment, Vol. 25, No. 3, pp. 188-195 (in Korean). https://doi.org/10.5572/KOSAE.2009.25.3.188
-
Yu, S. A., Jeong, A. R., Jung, H., Lee, H. W., Gwon, H. B. and Park, Y. S. (2012). "A study on property and
$CO_{2}$ emission factor of domestic fuel." The Korean Society of Automotive Engineers, KSAE, in Korean, Vol. 2012, No. 5, pp. 400-405. - Standard RSMeans (2012). Korea institute of construction technology (in Korean).
Cited by
- Analysis of the CO2 emission characteristics of earthwork equipment vol.19, pp.1, 2015, https://doi.org/10.1007/s12205-014-0679-8
- A study on analysis of the environmental load impact factors in the planning stage for highway project vol.20, pp.6, 2016, https://doi.org/10.1007/s12205-015-0526-6
- Sustainable Design Method of Reinforced Concrete Beam Using Embodied Energy Optimization Technique vol.34, pp.4, 2014, https://doi.org/10.12652/Ksce.2014.34.4.1053
- A Study on the Effect of the Urban Regeneration Project on the Reduction of Carbon Emission - A Case Study of Jeonju Test-Bed - vol.36, pp.1, 2016, https://doi.org/10.12652/Ksce.2016.36.1.0065
- Experimental Analysis to Characterizing CO2 Emission of Roller vol.898, pp.1662-8985, 2014, https://doi.org/10.4028/www.scientific.net/AMR.898.452
- The Environmental Load Characteristic Analysis of LCA-based IPC Girder Bridge vol.164, pp.1755-1315, 2018, https://doi.org/10.1088/1755-1315/164/1/012032