초록
본 연구는 발전기와 충전기를 통합하여 필요에 따라서 용접기 또는 발전기로 사용할 수 있는 시스템에 관한 것이다. 구체적으로는, 발전기를 제어하는 제어장치와 다기능 용접기를 사용할 수 있도록 하는 선택 스위치로 구성된 하이브리드 용접기로써 그 기능은 발전기 전원을 충전지에 충전이 완료되면, 발전기는 자동 정지하도록 구성하는 부분과 Co2 MMA TIG MIG MAG 용접기를 모제와 용제에 따라서 공급하는 가스를 제어하도록 제안하였다. 이는 한 번에 한 가지 또는 두 가지 정도만을 선택하는 기존 용접기의 성능과 편리성을 개선하기 위해 전압, 고주파, 모터 그리고 가스 밸브를 제어하는 시스템을 구현하였다.
This study is on the system that can integrate generator and charger to use as a welder and generator for need. Specifically, it was hybrid generator consisted with select switch to use generator controller and multiple function welder, that function were auto-stopping generator when generator power finish to recharge in recharger battery and Co2 MMA TIG MIG MAG are devide depend on supplying gas. This control system of voltage, high-frequency, motor and gas valve was implemented in order to improve the performance and convenience of existing welders to choose only one or two at a time.