한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제30권8호
  • /
  • Pages.878-884
  • /
  • 2013
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지
DOI QR코드

DOI QR Code

LCD 와 가시광선 LED 기반의 광조형 시스템을 위한 수지의 경화 특성

Curing Characteristics for Projection Stereolithography based on LCD and Visible LED

  • 투고 : 2013.05.03
  • 심사 : 2013.07.08
  • 발행 : 2013.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Stereolithography can be classified into two main categories according to the cross-sectional shape: scanning type and projection type. Projection stereolithography has significant advantages when making a layer using a single patterned beam, and results in improved speed and accuracy. To implement relatively low-cost projection stereolithography, we developed a system using a commercially available resin, which cures on exposure to visible light. The optimum photoinitiator was investigated, as well as the mixing ratio. The viscosity, shrinkage, curing depth and tensile strength were evaluated through several experiments on fabricated three-dimensional structures, and thus an optimal resin selection system was developed.

키워드

참고문헌

  1. Li, Y., Li, D., and Lu, B., "Introduction to Sterelithography and its Application," Jounal of Applied Optic, Vol. 9, No. 3, pp. 34-36, 1999.
  2. Park, I. B., Choi, J. W., Ha, Y. M., and Lee, S. H., "Multiple Fabrications of sacrificial Layers to Enhance the Dimensional Accuracy of Microstructures in Maskless Projection Microstereolithography," Int. J. Precis. Eng. Manuf., Vol. 10, No. 1, pp. 91-98, 2009.
  3. Pham, D. T. and Ji, C., "Design for Stereolithography," Journal of Mechanical Engineering Science, Vol. 214, No. 5, pp. 635-640, 2000. https://doi.org/10.1243/0954406001523650
  4. Knitter, R., Bauer, W., Gohring, D., and Risthaus, P., "RP process Chains for Ceramic Microcomponents," Rapid Prototyping Journal, Vol. 8, No. 2, pp. 76-82, 2002. https://doi.org/10.1108/13552540210420943
  5. Yoon, S. H., Park, I. B., Kim, M. S., Jo, K. H., and Lee, S. H., "Development of Projection Scanbeam- SLA using Liquid Crystal Display and visible Light Emitting Diode," J. Korean Soc. Precis. Eng., Vol. 30, No. 3, pp. 340-348, 2013. https://doi.org/10.7736/KSPE.2013.30.3.340
  6. Park, I. B., Lee, D. S., Ha, Y. M., and Lee, S. H., "Development of large area rapid prototyping using scanning beam method and LCD (liquid crystal display) module," Proc. of KSPE Autumn Conference, pp. 383-384, 2011.
  7. Yoon, S. H., Park, I. B., Lee, D. S., and Lee, S. H., "A study of control for curing ability of patterned visible beam through LCD (liquid crystal display)," Proc. of KSPE Autumn Conference, pp. 371-372, 2011.
  8. Chitec Technology Co. Ltd., www.chitec.com
  9. Roffey, C. G., "Photogeneration of Reactive Species for UV Curing," John Wiley & Sons. Ltd., 1997.
  10. Lee, Y. M., Seo, D. H., and Kwon, S. G., "High Polymer Chemistry," SciTech Media. Inc., 2004.