Composites Research

  • 제26권3호
  • /
  • Pages.155-159
  • /
  • 2013
  • /
  • 2288-2103(pISSN)
  • /
  • 2288-2111(eISSN)
한국복합재료학회 (The Korean Society for Composite Materials)
권호 표지
DOI QR코드

DOI QR Code

연속 섬유의 펼침에 대한 기술 현황 및 적용

Review : Continuous Fiber Tow Spreading Technologies and Its Applications

  • 노정우 (서울대학교 기계항공공학부) ;
  • 이우일 (서울대학교 기계항공공학부)
  • 투고 : 2013.05.10
  • 심사 : 2013.06.15
  • 발행 : 2013.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

연속 섬유의 펼침에 대한 기술 현황 및 이의 적용에 대해 본 연구에서 정리되었다. 이론적 접근을 통해 연속 섬유 펼침의 효과를 소개하였고, 섬유 펼침 수단과 섬유 펼침 장치의 공정 상 위치를 기준으로 연속 섬유의 펼침에 대한 기술을 분류 정리하였다. 또한, 각 기술의 일반적인 섬유 펼침 원리, 기술적용 및 기술의 장 단점에 대해 소개하였으며, 향후 연속 섬유의 펼침에 대한 기술 연구 방향에 대해서도 고려되었다.

This paper reviewed the continuous fiber tow spreading technologies and its applications. The effect of the continuous fiber tow spreading in manufacturing process of continuous fiber reinforced thermoplastic composite was introduced theoretically. The fiber tow spreading technologies were categorized according to the spreading medium and its order during manufacturing process. The general principles, the applications, and the merits and demerits of fiber tow spreading technologies were introduced. Furthermore, the proposal for future direction of research on this issue was considered in this study.

키워드

참고문헌

  1. Mazumdar S.K., Composites Manufacturing: Materials, Product, and Process Engineering, CRC Press LLC., USA, 2002.
  2. Krishan K.C., Composite Materials: Science and Engineering, 2nd edition, Springer, USA, 1998.
  3. Kim, T.W., Jun, E.J., Um, M.K., and Lee, W.I., "A Study on the Effect of Pressure on the Resin Impregnation of Fiber Bundles," Composites Research, Vol. 1, No. 1, 1988, pp. 67-72.
  4. Chang, I.Y., and Lees, J.K., "Recent Development in Thermoplastic Composites: A Review of Matrix Systems and Processing Methods," Journal of Thermoplastic Composite Materials, Vol. 1, 1988, pp. 277-296. https://doi.org/10.1177/089270578800100305
  5. Pandita, S.D., Irfan, M.S., Machavaram, V.R., Shotton-Gale, N., Mahendran, R.S., Wait, C.F., Paget, M.A., Harris, D., Leek, C., and Fernando, G.F., "Clean Wet-filament Winding - Part 1: Design Concept and Simulations," Journal of Composite Materials, Vol. 47, No. 3, 2013, pp. 379-390. https://doi.org/10.1177/0021998312440474
  6. Weustink, A.P.D., Development of a Rapid Thermoplastic Impregnation Device, Ph.D Thesis, Delft University of Technology, Netherlands, 2008.
  7. Henk, B., and Reinoud, J.G., "Impregnation of Glass Rovings with a Polyamide Melt. Part 1: Impregnation Bath," Composites Manufacturing, Vol. 4, No. 2, 1993, pp. 85-92 https://doi.org/10.1016/0956-7143(93)90075-J
  8. Irfan, M.S., Machavaram, V.R., Mahendran, R.S., Shotton-Gale, N., Wait, C.F., Paget, M.A., Hudson, M., and Fernando, G.F., "Lateral Spreading of a Fiber Bundle Via Mechanical Means," Journal of Composite Materials, Vol. 46, No. 3, 2012, pp. 311-330. https://doi.org/10.1177/0021998311424624
  9. Wilson, S.D.R., "Lateral Spreading of Fibre Tows," Journal of Engineering Mathematics, Vol. 32, 1997, pp. 19-26. https://doi.org/10.1023/A:1004253531061
  10. Roh, J.U., and Lee, W.I., "Processing of Thermoplastic Composites Reinforced with Long Fibers for Large Volume Applications," Proceeding of the 8th Asian-Australasian Conference on Composite Materials, Kuala Lumpur, Malaysia, Nov. 2012.
  11. Roh, J.U., and Lee, W.I., "Effect of Fiber Spreading on Impregnation of Thermoplastic into Continuous Fiber Bundle", Proceeding of the SAMPE 2012, Charleston, U.S.A., Oct. 2012.
  12. www.jeccomposites.com/news/composites-news/innovativetechnology-carbon-and-aramid
  13. www.compositesworld.com/columns/a-technological-brakefor-the-carbon-supply-roller-coaster
  14. Claire, S.-M., Pavel, S., Suresh, G.A., Shridhar, Y., and Shawn, W., "A Model for Thermoplastic Melt Impregnation of Fiber Bundles During Consolidation of Powder-impregnated Continuous Fiber Composites," Composites Part A: Applied Science and Manufacturing, Vol. 41, No. 1, 2010, pp. 93-100. https://doi.org/10.1016/j.compositesa.2009.09.026
  15. Ogden, A.L., Hyer, M.W., Wilkes, G.L., and Loos, A.C., "The Development of an Alternative Thermoplastic Powder Prepregging Technique," Journal of Thermoplastic Composite Materials, Vol. 5, No. 1, pp. 14-31.
  16. Markus, B., and Peter, M., "New Approach to Manufacture Thermoplastic Composites Using In-situ Impregnation Tape Placement Process," Proceeding of the SAMPE 2012, Charleston, U.S.A., Oct. 2012.
  17. Sihn, S.W., Kim, R.Y., Kazumasa, K., and Stephen, W.T., "Experimental Studies of Thin-ply Laminated Composites," Composites Science and Technology, Vol. 67, No. 6, 2007, pp. 996-1008. https://doi.org/10.1016/j.compscitech.2006.06.008

피인용 문헌

  1. 스프레드 탄소섬유 직물 복합재료의 성형온도에 따른 기계적 특성에 관한 연구 vol.33, pp.3, 2013, https://doi.org/10.7234/composres.2020.33.3.161
  2. 공기에 의한 탄소섬유 스프레딩 공정 변수에 따른 프로세스 성능 및 기계적 물성 평가 vol.33, pp.6, 2013, https://doi.org/10.7234/composres.2020.33.6.390