초록
본 연구에서는 마그네슘 합금 AZ31을 적용한 배터리 팩 케이스를 개발하여 자체 진동 및 외부 충격으로부터 배터리를 보호하도록 하며, 기존 스틸 소재 대비 50% 이상 경량화하여 친환경 기술개발을 목적으로 한다. 또한, 제품의 복잡한 형상 및 마그네슘 소재의 특성으로 제품을 성형하기에는 힘든 측면이 많으므로 이를 해결하기 위해 마그네슘 합금소재의 온도별 최적성형조건을 제시하고자 한다. 즉 AZ31의 성형방법에 따라 상온, $230^{\circ}C$, $250^{\circ}C$ 및 $270^{\circ}C$의 4가지 조건하의 시험편으로 인장시험, 경도시험, 부식시험 및 피로시험 등을 실시하여 기계적 특성을 정량적으로 분석하였고, 또 FEM해석을 통하여 자동차 부품 배터리 팩 케이스 개발에 적용토록 하였다.
Magnesium alloys are known to be hard-forming materials at room temperature owing to their material structure. This study analyzes the optimal temperature conditions of warm-forming and the forming process by using a high-pressure laminating test and FM analysis, respectively. The effect of temperature on the fatigue limit was examined from the collected specimens by analyzing the material properties after the fatigue test. The material formed at a temperature of $230^{\circ}C$ shows occasional defects, but the best forming quality was obtained at $270^{\circ}C$. The optimal temperature for the forming process was found to be $250^{\circ}C$ considering the material quality and thermal efficiency. The overall fatigue life of specimens decreases with an increase in the processing temperature. The fatigue limit of AZ31 formed at $250^{\circ}C$ was approximately 100 MPa after $10^6$ cycles.