DOI QR코드

DOI QR Code

크레인의 정밀한 정지와 잔류진동 억제를 위한 개선된 입력 성형기법

An Improved Input Shaping Method for Precise Stopping and Residual Vibration Reduction of Cranes

  • 배규현 (금오공과대학교 기전공학과 대학원) ;
  • 홍성욱 (금오공과대학교 기전공학과)
  • Bae, Gyu-Hyun (Graduate School, Department of Mechatronics, Kumoh National institute of Technology) ;
  • Hong, Seong-Wook (Department of Mechatronics, Kumoh National institute of Technology)
  • 투고 : 2013.01.23
  • 심사 : 2013.03.19
  • 발행 : 2013.07.01

초록

Industrial cranes are indispensable equipment in heavy industry. However, unwanted vibrations in cranes often cause accidents. Input shaping is widely accepted as a useful tool for removing residual vibration in cranes. A unity magnitude zero vibration (UMZV) input shaper is often used for cranes driven by on-off-type motors. However, although a UMZV input shaper minimizes residual vibration, the input shaper cannot prevent the crane from moving slightly further than expected from the original command. This paper describes an improved method of input shaping that can compensate for position inaccuracies, as well as remove the residual vibration of cranes. Experiments were performed to validate the proposed input-shaping method, illustrated through numerical simulations.

키워드

참고문헌

  1. Park, S. W. and Hong, S. W., "Application of Input Shaping Method to Industrial Cranes," J. Korean Soc. Precis. Eng., Vol. 28, No. 9, pp.1032-1039, 2011.
  2. Kim, H. H. and Lee, G., "An Analysis of the Accident Types and Causes of Construction Cranes," Proc. of KIC Spring Conference, Vol. 7, No. 1, pp. 109-112, 2007.
  3. Lee, H. H. and Cho, S. K., "Position and Swing Angle Control for Loads of Overhead Crane," Trans. KSME A, Vol. 21, No. 2, pp. 297-304, 1997.
  4. Lee, H. H. and Cho, S. K., "Position and Load-Swing Control of a 2-Dimensional Overhead Crane," Trans. KSME A, Vol. 21, No. 10, pp. 1683-1693, 1997.
  5. Yoon, J. S., "Comparison Study of Various Control Schemes for the Anti-Swing Crane," Trans. KSME, Vol. 19, No. 9, pp. 2399-2411, 1995.
  6. Hekman, K. A. and Singhose, W. E., "Feedback Control for Suppression of Crane Payload Oscillation Using On-Off Commands," Proc. of the American Control Conference, pp. 1784-1789, 2006.
  7. Singhose, W. and Seering, W., "Command Generation for Dynamic Systems," http://www.Lulu.com, 2007.
  8. Khalid, A., Huey, J., Singhose, W., Lawrence, J., and Frakes, D., "Human Operator Performance Testing Using an Input-Shaped Bridge Crane," J. of Dynamic Systems, Measurement, and Control, Vol. 128, No. 4, pp. 835-841, 2006. https://doi.org/10.1115/1.2361321
  9. Singhose, W., Porter, L., Kenison, M., and Kriikku, E., "Effects of Hoisting on the Input Shaping Control of Gantry Cranes," Control Engineering Practice, Vol. 8, No. 10, pp. 1159-1165, 2000. https://doi.org/10.1016/S0967-0661(00)00054-X
  10. Sorensen, K. L., Singhose, W., and Dickerson, S., "A Controller Enabling Precise Positioning and Sway Reduction in Bridge and Gantry Cranes," Control Engineering Practice, Vol. 15, No. 7, pp. 825-837, 2007. https://doi.org/10.1016/j.conengprac.2006.03.005
  11. Vaughan, J. and Singhose, W., "Input Shapers for Reducing Overshoot in Human-operated Flexible Systems," Proc. of the American Control Conference, pp. 178-183, 2009.
  12. Kim, B. G. and Hong, S. W., "Input Shaper Design for Tower Crane in Consideration of Nonlinear Coupled Motions," J. Korean Soc. Precis. Eng., Vol. 26, No. 9, pp. 88-95, 2009.
  13. Garrido, S., Abderrahim, M., Gimenez, A., Diez, R., and Balaguer, C., "Anti-Swinging Input Shaping Control of an Automatic Construction Crane," IEEE Transaction on Automation Science and Engineering, Vol. 5, No. 3, pp. 549-557, 2008. https://doi.org/10.1109/TASE.2007.909631
  14. Masoud, Z. N. and Daqaq, M. F., "A Graphical Approach to Input-Shaping Control Design for Container Cranes With Hoist," IEEE Control Systems Technology, Vol. 14, No. 6, pp. 1070-1077, 2006. https://doi.org/10.1109/TCST.2006.883194
  15. Sorensen, K. L., "A Combined Feedback and Command Shaping Controller for Improving Positioning and Reducing Cable Sway in Cranes," M.Sc. thesis, Department of Mechanical Engineering, Georgia Institute of Technology, 2005.