텍스쳐링 스킨을 포함하는 자동차 도어트림 레일의 개발에 관한 연구

Study on Development of Automotive Door Trim Rail including Texturing Skin

  • Lee, Eun-Jong (Kongju National University Div. of Mechanical&Automotive) ;
  • Kim, Key-Sun (Kongju National University Div. of Mechanical&Automotive)
  • 발행 : 2013.02.28

초록

For the senses of beauty and texture, internal components of small passenger cars are manufactured by texturing plastic with drawplate but those of deluxe passenger cars are manufactured by bonding pre-embossed skin to the surface of drawplate. As the pre-embossed skin is bonded at high temperature and pressure, the pattern of skin is distorted. The corner part is hardened and its dimension tolerance is changed by resulting in the increase with its defective rate. This study provides the method to design and manufacture the door trim track by vacuuming the non-patterned skin to upper-side drawplate which forms the pattern of descending skin. It is pressed to the plastic product with hot-press method and the damage of bossed-pattern is prevented. Valuation in this study has been done by analyzing, designing and experimenting method.

키워드

참고문헌

  1. H. Hikita and A. Kenji, "Development of weight reduct ion technology for door trim using foamed PP", Automotive Engineers of Japan, Vol. 23 No. 2, pp. 239-244, 2002.
  2. D. Onkar, S. Hayes, M. Dalpizzol, J. Dowd and J. Bhise, "A Value Analysis Tool for Automotive Interior Door Trim Panel Materials and Process Selection", Society of Automotive Engineers, Vol. 56 No. 5, pp. 33-46, 2007.
  3. S. Y. Kim et al, "Prototype Manufacturing Using Low Pressure Vacuum Injection Molding Machine", Proceedings of the KSMPE Conference, pp. 88-92, 2008.
  4. H. J. Choi, C. W. Park and S. D. Choi, "Analyses on Deformation Patterns Depending on the Injection Process for Rear Lamp Reflectors of Automotive", J. of the Korean Society of Manufacturing Process Engineers, Vol. 9 No. 4, pp. 32-37, 2010.
  5. B. D. Ko, "A Study on the Low Pressure Injection Molding of Automotive Seat-back Cover", J. of the Korean Society of Precision Engineering, Vol.25, No.12, pp. 100-106, 2008.
  6. S. H. LEE, "Technology of Mold Design and Manufacturing for Vacuum-Assisted Thermo forming Mold in Insert Film Injection Molding", Proc. of OKSDME, Vol. 1 pp.69-73, 2008.
  7. K. S. Kim and S. H. Kim, "The Study on Skin Adhesive Technology for Automotive Interior Using the Vacuum Suction Process", J. of the Korea Academia-Industrial cooperation Society, Vol. 12 No. 3, pp. 1045-1050, 2011. https://doi.org/10.5762/KAIS.2011.12.3.1045