DOI QR코드

DOI QR Code

Towards improved floor spectra estimates for seismic design

  • Sullivan, Timothy J. (Department of Civil Engineering and Architecture, Universita degli Studi di Pavia) ;
  • Calvi, Paolo M. (Department of Civil Engineering and Architecture, Universita degli Studi di Pavia) ;
  • Nascimbene, Roberto (Department of Civil Engineering and Architecture, Universita degli Studi di Pavia)
  • 투고 : 2011.06.02
  • 심사 : 2012.05.09
  • 발행 : 2013.01.25

초록

Current codes incorporate simplified methods for the prediction of acceleration demands on secondary structural and non-structural elements at different levels of a building. While the use of simple analysis methods should be advocated, damage to both secondary structural and non-structural elements in recent earthquakes have highlighted the need for improved design procedures for such elements. In order to take a step towards the formation of accurate but simplified methods of predicting floor spectra, this work examines the floor spectra on elastic and inelastic single-degree of freedom systems subject to accelerograms of varying seismic intensity. After identifying the factors that appear to affect the shape and intensity of acceleration demands on secondary structural and non-structural elements, a new series of calibrated equations are proposed to predict floor spectra on single degree of freedom supporting structures. The approach uses concepts of dynamics and inelasticity to define the shape and intensity of the floor spectra at different levels of damping. The results of non-linear time-history analyses of a series of single-degree of freedom supporting structures indicate that the new methodology is very promising. Future research will aim to extend the methodology to multi-degree of freedom supporting structures and run additional verification studies.

키워드

참고문헌

  1. ASCE/SEI 7-05 (2005), Minimum design loads for buildings and other structures, American Society of Civil Engineers, 388.
  2. Baker, J.W. (2007), "Quantitative classification of near-fault ground motions using wavelet analysis", B. Seismol. Soc. Am., 97(5), 1486-1501. https://doi.org/10.1785/0120060255
  3. Carr, A.J. (2009), "Ruaumoko3D - A program for inelastic time-history analysis", Department of Civil Engineering, University of Canterbury, New Zealand.
  4. CEN EC8 (2004), Eurocode 8 - Design provisions for earthquake resistant structures, EN-1998-1:2004: E, Comite Europeen de Normalization, Brussels, Belgium.
  5. Drake, R.M. and Bachman, R.E. (1995), "Interpretation of instrumented building seismic data and implications for building codes", SEAOC.
  6. Chopra, A.K. (2000), Dynamics of structures, Pearson Education, USA.
  7. Dhakal, R.P. (2010), "Damage to non-structural components and contents in the 2010 Darfield earthquake", B. Earthq. Eng., 43(4), 404-411.
  8. Emori, K. and Schnobrich, W.C. (1978), "Analysis of reinforced concrete frame-wall structures for strong motion earthquakes", Civil Engineering Studies, Structural Research Series No.434, University of Illinois, Urbana, Illinois.
  9. Filiatrault, A., Epperson, M. and Folz, B. (2004), "Equivalent elastic modelling for the direct displacementbased seismic design of wood structures", ISET J. Earthq. Technol., 41(1), 75-99.
  10. Igusa, T. and Der Kiureghian, A. (1985), "Generation of floor response spectra including oscillator-structure interaction", Earthq. Eng. Struct. D., 13(5), 661-676. https://doi.org/10.1002/eqe.4290130508
  11. Kramer, S.L. (1996), Geotechnical earthquake engineering, Prentice-Hall.
  12. Krawinkler, H., Cofie, N.G., Astiz, M.A. and Kircher, C.A. (1979), "Experimental study on the seismic behaviour of industrial storage racks", Report 41, John A. Blume Earthquake Engineering Center, Stanford University, California, 147.
  13. Kumari, R. and Gupta, V.K. (2007), "A modal combination rule for peak floor accelerations in multistoried buildings", ISET J. Earthq. Technol., 44(1), 213-231.
  14. Lago, A. and Sullivan, T.J. (2011), "A review of glass façade systems and research into the seismic design of frameless glass façades", IUSS Research Report No. ROSE-2011/01, IUSS press, Pavia, Italy, www.iusspress.it, 166.
  15. Lenk, P. and Coult, G. (2010), "Damping of glass structures and components", Proceedings of Challenging Glass Conference 2, Delft, The Netherlands.
  16. Magenes, G., Morandi, P. and Penna, A. (2008), "Experimental in-plane cyclic response of masonry walls with clay units", Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China.
  17. Menon, A. and Magenes, G. (2008), "Out-of-plane seismic response of unreinforced masonry definition of seismic input", Research Report ROSE - 2008/04, IUSS Press, Pavia, Italy, 269.
  18. Nakagami, Y. (2003), "Probabilistic dynamics of wind excitation on glass facade", Doctoral Thesis, University of Darmastadt, Germany.
  19. Newton, I. (1687), "Philosophiae naturalis principia mathematica ("Mathematical Principles of Natural Philosophy")", London; for an English version from 1846 see: http://www.archive.org/details/newtonspmathema00newtrich.
  20. NZS1170.5:2004 (2004), Structural design actions Part 5 : Earthquake actions - New Zealand, Standards Council of New Zealand.
  21. Otani, S. (1981), "Hysteretic models for reinforced concrete for earthquake analysis", J. Fac. Architect., 36(2), 125-159.
  22. Paulay, T. and Priestley, M.J.N. (1992), Seismic design of reinforced concrete and masonry buildings, John Wiley & Sons, Inc., New York.
  23. Priestley, M.J.N., Calvi, G.M. and Kowalsky, M.J. (2007), "Direct displacement-based seismic design", IUSS Press, Pavia, Italy, 720.
  24. Rivera, J. (2008), "On the development of seismic design forces for flexible floor diaphragms in reinforced concrete wall buildings", ROSE School PhD thesis, Univeristà degli Studi di Pavia, Pavia, Italy, 225.
  25. Rodriguez, M., Restrepo, J.I. and Carr, A.J. (2000), "Earthquake resistant precast concrete buildings: Floor accelerations in buildings", Department of Civil Engineering, University of Canterbury, Research Report 2000-6.
  26. Rodriguez, M.E., Restrepo, J.I. and Carr, A.J. (2002), "Earthquake-induced floor horizontal accelerations in buildings", Earthq. Eng. Struct. D., 31(3), 693-718. https://doi.org/10.1002/eqe.149
  27. Seismosoft (2011), "SeismoSignal - A computer program for signal processing of strong-motion data", available from URL: http://www.seismosoft.com.
  28. Shelton, R.H., Park, S.G. and King, A.B. (2002), "Earthquake response of building parts", Proceedings of NZ Society for Earthquake Engineering Annual Conference.
  29. Sullivan, T.J., Priestley, M.J.N. and Calvi, G.M. (2006), "Seismic design of frame-wall structures", ROSE Research Report 2006/02, IUSS Press, Pavia, Italy.
  30. Taghavi, S. and Miranda, E. (2006), "Seismic demand assessment on acceleration-sensitive building nonstructural components", Proceedings of the 8th National Conference on Earthquake Engineering, San Francisco, California, USA.
  31. The New Zealand Treasury (2011) "Budget economic and fiscal update 2011", ISBN: 978-0-478-37812-2 (Online) http://purl.oclc.org/nzt/b-1381.
  32. Thomson, W.T. and Dahleh, M.D. (1998), "Theory of vibration with applications", Fifth Edition, Prentice Hall, Upper Saddle River, New Jersey 07458, U.S., 524.
  33. Villaverde, R. (1997), "Seismic design of secondary structures: state of the art", J. Struct. Eng.-ASCE, 123(8), 1011-1019. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:8(1011)
  34. Villaverde, R. (2004), "Seismic analysis and design of non-structural elements", in Earthquake engineering from engineering seismology to performance-based design, (Eds) Y. Bozorgnia, V.V. Bertero, CRC Press, 19-48.

피인용 문헌

  1. Code-oriented floor acceleration spectra for building structures vol.15, pp.7, 2017, https://doi.org/10.1007/s10518-016-0076-4
  2. Peak floor acceleration demand prediction based on response spectrum analysis of various sophistication vol.228, pp.4, 2017, https://doi.org/10.1007/s00707-016-1756-5
  3. Probabilistic seismic demand model for nonstructural components vol.45, pp.4, 2016, https://doi.org/10.1002/eqe.2674
  4. Estimating floor spectra in multiple degree of freedom systems vol.7, pp.1, 2014, https://doi.org/10.12989/eas.2014.7.1.017
  5. Application of predictive models to assess failure of museum artifacts under seismic loads vol.23, 2017, https://doi.org/10.1016/j.culher.2016.10.001
  6. Performance-based seismic design of nonstructural building components: The next frontier of earthquake engineering vol.13, pp.S1, 2014, https://doi.org/10.1007/s11803-014-0238-9
  7. Floor response spectra for beyond design basis seismic demand vol.323, 2017, https://doi.org/10.1016/j.nucengdes.2017.01.006
  8. Relative Displacement Floor Spectra for Seismic Design of Non Structural Elements vol.18, pp.7, 2014, https://doi.org/10.1080/13632469.2014.923795
  9. A method for the direct determination of approximate floor response spectra for SDOF inelastic structures vol.13, pp.5, 2015, https://doi.org/10.1007/s10518-014-9667-0
  10. Evaluation of out-of-plane seismic performance of column-to-column precast concrete cladding panels in one-storey industrial buildings vol.47, pp.2, 2018, https://doi.org/10.1002/eqe.2956
  11. Spectrum-to-spectrum methods for the generation of elastic floor acceleration spectra vol.199, 2017, https://doi.org/10.1016/j.proeng.2017.09.514
  12. Floor Response Spectra for Bare and Infilled Reinforced Concrete Frames vol.18, pp.7, 2014, https://doi.org/10.1080/13632469.2014.916633
  13. Factors influencing the repair costs of soft-story RC frame buildings and implications for their seismic retrofit vol.101, 2015, https://doi.org/10.1016/j.engstruct.2015.06.045
  14. Inelastic Displacement Ratios for Nonstructural Components Subjected to Floor Accelerations 2018, https://doi.org/10.1080/13632469.2016.1244131
  15. Combining in-plane and out-of-plane behaviour of masonry infills in the seismic analysis of RC buildings vol.6, pp.5, 2014, https://doi.org/10.12989/eas.2014.6.5.515
  16. Developing Direct Displacement-Based Procedures for Simplified Loss Assessment in Performance-Based Earthquake Engineering vol.18, pp.2, 2014, https://doi.org/10.1080/13632469.2013.851046
  17. Using ambient vibration measurements to generate experimental floor response spectra and inter-story drift curves of Reinforced Concrete (RC) buildings vol.199, 2017, https://doi.org/10.1016/j.proeng.2017.09.163
  18. Choices and Criteria for Seismic Strengthening vol.17, pp.6, 2013, https://doi.org/10.1080/13632469.2013.781556
  19. Uniform hazard floor acceleration spectra for linear structures vol.46, pp.7, 2017, https://doi.org/10.1002/eqe.2847
  20. Floor Spectra of Inelastic RC Frame Buildings Considering Ground Motion Characteristics 2016, https://doi.org/10.1080/13632469.2016.1244134
  21. A method for the direct estimation of floor acceleration spectra for elastic and inelastic MDOF structures vol.45, pp.15, 2016, https://doi.org/10.1002/eqe.2779
  22. Simplified seismic performance assessment and implications for seismic design vol.13, pp.S1, 2014, https://doi.org/10.1007/s11803-014-0242-0
  23. Evaluation of ASCE 7 equations for designing acceleration-sensitive nonstructural components using data from instrumented buildings 2018, https://doi.org/10.1002/eqe.3006
  24. Seismic demand on light acceleration-sensitive nonstructural components in European reinforced concrete buildings vol.44, pp.8, 2015, https://doi.org/10.1002/eqe.2508
  25. Piping Fragility Evaluation: Interaction With High-Rise Building Performance vol.139, pp.3, 2017, https://doi.org/10.1115/1.4034406
  26. Performance-Based Seismic Design of Nonstructural Building Elements pp.1559-808X, 2021, https://doi.org/10.1080/13632469.2018.1512910
  27. Fragility functions and floor spectra of RC masonry infilled frames: influence of mechanical properties of masonry infills pp.1573-1456, 2018, https://doi.org/10.1007/s10518-018-0435-4
  28. Seismic performance of non-structural elements during the 2016 Central Italy earthquake pp.1573-1456, 2019, https://doi.org/10.1007/s10518-018-0361-5
  29. Seismic Response of Acceleration-Sensitive Non-Structural Components in Buildings vol.9, pp.1, 2019, https://doi.org/10.3390/buildings9010007
  30. Seismic assessment of an industrial frame-tank system: development of fragility functions pp.1573-1456, 2019, https://doi.org/10.1007/s10518-018-00548-2
  31. Lessons Learned from Evaluating the Responses of Instrumented Buildings in the United States: The Effects of Supporting Building Characteristics on Floor Response Spectra vol.35, pp.1, 2019, https://doi.org/10.1193/081017EQS159M
  32. Simplified seismic loss functions for suspended ceilings and drywall partitions vol.49, pp.1, 2013, https://doi.org/10.5459/bnzsee.49.1.64-78
  33. DIRECT EVALUATION METHOD OF FLOOR RESPONSE SPECTRA FROM SPECIFIED GROUND RESPONSE SPECTRA BASED ON SPECTRUM DIFFERENCE RULE vol.81, pp.729, 2013, https://doi.org/10.3130/aijs.81.1789
  34. EXPECTED VALUES OF DYNAMIC AMPLIFICATION RATIO OF NONSTRUCTURAL COMPONENTS IN RESONANCE CONSIDERING SIGNIFICANT DURATION OF STRONG GROUND MOTIONS vol.83, pp.746, 2013, https://doi.org/10.3130/aijs.83.555
  35. Derivation of floor acceleration spectra for an industrial liquid tank supporting structure with braced frame systems vol.171, pp.None, 2018, https://doi.org/10.1016/j.engstruct.2018.05.053
  36. Seismic response evaluation of medical gas and fire-protection pipelines’ Tee-Joints vol.173, pp.None, 2013, https://doi.org/10.1016/j.engstruct.2018.07.045
  37. SEISMIC RESPONSE SPECTRUM RULE FOR NON-STRUCTURAL COMPONENTS IN BUILDINGS vol.84, pp.758, 2013, https://doi.org/10.3130/aijs.84.489
  38. Floor Spectra Estimates for an Industrial Special Concentrically Braced Frame Structure vol.141, pp.1, 2019, https://doi.org/10.1115/1.4041285
  39. Evaluation of seismic design provisions for acceleration-sensitive non-structural components vol.16, pp.5, 2013, https://doi.org/10.12989/eas.2019.16.5.611
  40. Seismic demand and capacity assessment of suspended ceiling systems vol.193, pp.None, 2013, https://doi.org/10.1016/j.engstruct.2019.05.034
  41. Effect of strong ground motion duration on the expected peak values of floor response spectra in elastic buildings vol.2, pp.4, 2019, https://doi.org/10.1002/2475-8876.12114
  42. Damping modification factor for elastic floor spectra vol.17, pp.11, 2013, https://doi.org/10.1007/s10518-019-00684-3
  43. Post-Earthquake Reparability of Buildings: The Role of Non-Structural Elements vol.30, pp.2, 2013, https://doi.org/10.1080/10168664.2020.1724525
  44. Evaluation of Seismic Acceleration Demands on Building Nonstructural Elements vol.146, pp.7, 2020, https://doi.org/10.1061/(asce)st.1943-541x.0002676
  45. Seismic Vulnerability of Cabinet Facility with Tuned Mass Dampers Subjected to High- and Low-Frequency Earthquakes vol.10, pp.14, 2013, https://doi.org/10.3390/app10144850
  46. A practice-oriented method for estimating elastic floor response spectra vol.53, pp.3, 2020, https://doi.org/10.5459/bnzsee.53.3.116-136
  47. Strength‐reduction factors for the design of light nonstructural elements in buildings vol.49, pp.13, 2013, https://doi.org/10.1002/eqe.3292
  48. Evaluation of floor acceleration demands from the 2017 Mexico City code seismic provisions using a continuous elastic model and records of instrumented buildings vol.36, pp.2, 2013, https://doi.org/10.1177/8755293020974692
  49. Direct generation of floor design spectra (FDS) from uniform hazard spectra (UHS) - Part I: formulation of the method vol.47, pp.12, 2013, https://doi.org/10.1139/cjce-2018-0146
  50. Direct generation of floor design spectra (FDS) from uniform hazard spectra (UHS) - Part II: extension and application of the method vol.47, pp.12, 2013, https://doi.org/10.1139/cjce-2018-0151
  51. Floor Acceleration Demands in a Twelve-Storey RC Shear Wall Building vol.11, pp.2, 2013, https://doi.org/10.3390/buildings11020038
  52. Seismic Performance of a Green Roof Structure vol.13, pp.8, 2021, https://doi.org/10.3390/su13084278
  53. Earthquake-Induced Floor Accelerations in Base-Rocking Wall Buildings vol.25, pp.5, 2013, https://doi.org/10.1080/13632469.2018.1548393
  54. Peak Factor-Based Modal Combination Rule of Response-Spectrum Method for Peak Floor Accelerations vol.147, pp.7, 2021, https://doi.org/10.1061/(asce)st.1943-541x.0003044
  55. Seismic design of acceleration-sensitive non-structural elements in New Zealand: State-of-practice and recommended changes vol.54, pp.4, 2013, https://doi.org/10.5459/bnzsee.54.4.243-262
  56. Floor acceleration response spectra of elastic reinforced concrete frames vol.45, pp.None, 2022, https://doi.org/10.1016/j.jobe.2021.103558
  57. Seismic acceleration demand and fragility assessment of storage tanks installed in industrial steel moment-resisting frame structures vol.152, pp.None, 2013, https://doi.org/10.1016/j.soildyn.2021.107016
  58. Analysis of the Acceleration Response Spectra of Single-Layer Spherical Reticulated Shell Structures vol.12, pp.4, 2013, https://doi.org/10.3390/app12042116