초록
본 논문에서는 집중 소자를 이용한 광대역 평판형 마이크로파 바이어스-티의 설계를 보였다. 설계된 바이어스-티는 DC 블록과 RF 초크로 구성된다. DC 블록용 커패시터는 광대역으로 동작하는 커패시터를 사용하였고, DC 공급 및 RF 초크용 인덕터는 서로 다른 자기 공진 주파수(SRF: Self Resonance Frequency)를 가지는 인덕터들을 직렬로 연결하였다. RF 초크에서 집중 소자들의 직렬 공진에 의하여 발생하는 신호의 손실을 병렬의 저항과 커패시터를 연결하여 해결하였다. 설계된 바이어스-티는 1608 칩 형태의 집중 소자들을 이용 조립하여 제작하였다. 측정은 커넥터의 손실과 영향을 제거하기 위하여 Anritsu 3680K jig에 연결하여 측정하였다. 제작된 바이어스-티는 10 MHz~18 GHz의 광대역에서 동작하고, 측정된 반사 손실이 -15 dB 이하를 가지며, 삽입 손실은 -1.5 dB 이하인 것을 확인하였다.
In this paper, a design of planar microwave bias-tee using lumped elements was presented. The bias-tee is composed of 2 blocks; DC block and RF choke. For this design of the bias-tee, a wideband capacitor was used for DC block. For a RF choke, a series connection of inductors which have different SRFs is used for a RF choke. In the RF choke, a series connection of resistor and capacitor was added in shunt to eliminate a loss from a series resonance. The designed bias-tee was implemented by using 1608 SMT chip components. The fabricated bias-tee was measured using Anritsu 3680K fixture which enables to remove an effect of a connector. The fabricated bias-tee presented -15 dB of return loss and -1.5 dB insertion loss at 10 MHz~18 GHz.