DOI QR코드

DOI QR Code

질량추정과 외란추력 관측기를 이용한 자동피킹 시스템 구동용 선형 유도모터의 강인제어 기법

A Robust Control Scheme of Linear Induction Machine for Automatic Picking System Using Mass Estimation and Disturbance Force Observer

  • 최정현 (서울과학기술대학교 전기정보공학과) ;
  • 유동상 (국립한경대학교 전기전자제어공학과) ;
  • 김경화 (서울과학기술대학교 전기정보공학과)
  • Choi, Jung-Hyun (Dept. of Electrical and Information Engineering, Seoul National University of Science and Technology) ;
  • Yoo, Dong-Sang ;
  • Kim, Kyeong-Hwa (Dept. of Electrical and Information Engineering, Seoul National University of Science and Technology)
  • 투고 : 2013.02.06
  • 심사 : 2013.03.11
  • 발행 : 2013.04.30

초록

To operate an automatic picking system in distribution center with high precision and high dynamics, this paper presents a robust control scheme of a linear induction motor (LIM) using the mass estimation and disturbance force observer. The force disturbance which gives a direct influence on the control performance of LIM is estimated in real-time through the disturbance observer and compensated by a feedforward manner. To get a satisfactory performance even under the mass variation by reducing the disturbance force due to the mismatched mass during the speed transient such as the acceleration and deceleration periods, a mass estimation algorithm is proposed. A Simulink model for LIM is developed and the validity of the proposed scheme is verified through the comparative simulation studies using Matlab - Simulink.

키워드

참고문헌

  1. http://www.ssi-schaefer.us/
  2. http://www.sihs.com/
  3. J. F. Gieras, Linear Induction Drives. Oxford: Clarendon Press, 1994.
  4. F J. Lin, H. J. Shieh, K. K. Shyu, and P. K. Huang, "On-line gain tuning IP controller using real-coded genetic algorithm", Electric Power System Research Vol. 72, pp. 157-169, 2004. https://doi.org/10.1016/j.epsr.2004.03.013
  5. H. W. Lim, B. Chae, M. H. Choi, K. Y. Lee, G. B. Cho, and H. L. Baek, "The stabilized speed control modeling of single-side linear induction motor considering end-effect", The Transactions of Korean Institute of Power Electronics, vol. 11, no. 3, pp. 266-273, 2006.
  6. W. Xu, Y. Zhang, C. Zeng, and X. Xiao, "Rotor field oriented control of linear induction machine based on fuzzy self-adapting PI controller", IEEE Inter. Symposium on Industrial Electronics, pp. 731-736, 2012.
  7. C. J. Ree, "Conveyor system equipped with and driven by a moving primary-typed SLIM", Journal of The Korean Institute of Illuminating and Electrical Installation Engineers, vol. 11, no. 5, pp. 53-61, 1997.
  8. D. R. Shin, T. W. Heo, J. H. Park, K. Y. Heo, T. K. Roh, and J. I. Woo, "Vector control using a slip angle frequency for the thrust control of SLIM used a conveyor by the inverter based DSP", Journal of The Korean Institute of Illuminating and Electrical Installation Engineers, vol. 14, no. 3, pp. 29-37, 2000.
  9. J. I. Woo, T. K. Roh, D. R. Shin, and I. B. Roh, "A operating by the direct thrust control of SLIM in conveyor system", Journal of The Korean Institute of Illuminating and Electrical Installation Engineers, vol. 12, no. 3, pp. 59-66, 1998.
  10. S. Kobayashi, I. Awaya, H. Kuromaru, and K. Oshitani, "Dynamic model based auto-tuning digital servo driver", IEEE Trans. on Indus. Electr., Vol. 42, No. 5, pp. 462-466, 1995. https://doi.org/10.1109/41.464608
  11. M. Iwasaki and N. Matsui, "Robust speed control of IM with torque feedforward control", IEEE Trans. Indus. Electr., Vol. 40, No. 6, pp. 553-560, 1993. https://doi.org/10.1109/41.245892
  12. O. Barambones, P. Alkorta, J. M. G. de Durana, and E. Kremers, "A robust position control for induction motors using a load torque observer", Mediterranean Conference on Control & Automation, pp. 278-283, 2012.
  13. P. C. Krause, Analysis of Electric Machinery. New York: McGraw-Hill, 1986.
  14. D. W. Novotny and R. D. Lorenz, Introduction to field orientation and high performance AC drives. IEEE IAS Tutorial Course, 1986.
  15. T. M. Rowan and R. J. Kerkman, "A new synchronous current regulator and an analysis of current-regulated PWM inverters", IEEE Trans. Ind. App., Vol. 22, No. 4, pp. 678-690, Jul. 1986.
  16. H. W. Van Der Broeck, H. C. Skldelny, and G. V. Stanke, "Analysis and realization of a pulsewidth modulator based on voltage space vectors", IEEE Trans. Ind. App., Vol. 24, No. 1, pp. 142-150, Jan./Feb. 2008.
  17. K. Ogata, Discrete-time Control Systems. Prentice-Hall, 1987.
  18. R. C. Dorf and R. H. Bishop, Modern Control Systems. Prentice-Hall International Editions, 2005.