한국소음진동공학회논문집 (Transactions of the Korean Society for Noise and Vibration Engineering)

  • 제23권4호
  • /
  • Pages.372-378
  • /
  • 2013
  • /
  • 1598-2785(pISSN)
  • /
  • 2287-5476(eISSN)
한국소음진동공학회 (The Korean Society for Noise and Vibration Engineering)
권호 표지
DOI QR코드

DOI QR Code

압력 강하를 고려한 머플러 천공판 최적설계

Optimal Design of a Muffler with Perforated Plates Considering Pressure Drop

  • 투고 : 2013.02.15
  • 심사 : 2013.03.27
  • 발행 : 2013.04.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

An acoustical shape optimization problem is formulated for optimal design of a perforated reactive muffler with offset inlet/outlet. The mean transmission loss value in a target frequency range is maximized for an allowed pressure drop value between an inlet and an outlet. Partitions in the chamber are divided into several sub-partitions, whose lengths are selected as design variables. Each sub-partition has the same number of holes, whose sizes are equal. A finite element model is employed for acoustical and flow analyses. A gradient-based optimization algorithm is used to obtain an optimal muffler. The acoustical and fluidic characteristics of the optimal muffler are compared with those of a reference muffler. Validation experiment is carried out to support the effectiveness of our suggested method.

키워드

참고문헌

  1. Selamet, A. and Ji, Z. L., 1999, Acoustic Attenuation Performance of Circular Expansion Chambers with Extended Inlet/Outlet, Journal of Sound and Vibration, Vol. 223, No. 2, pp. 197-212. https://doi.org/10.1006/jsvi.1998.2138
  2. Barbieri, R. and Barbieri, N., 2006, Finite Element Acoustic Simulation Based Shape Optimization of a Muffler, Applied Acoustics, Vol. 67, No. 4, pp. 346-357. https://doi.org/10.1016/j.apacoust.2005.06.007
  3. Selamet, A., Denia, F. D. and Besa, A. J., 2003, Acoustic Behavior of Circular Dual-chamber Mufflers, Journal of Sound and Vibration. Vol. 265, No. 5, pp. 967-985. https://doi.org/10.1016/S0022-460X(02)01258-0
  4. Lee, J. W. and Kim, Y. Y., 2007, Muffler Design Using a Topology Optimization Method, Proceedings of the KSNVE Annual Spring Conference, pp. 1085-1089.
  5. Munjal, M. L., Rao, K. N. and Sahasrabudhe, A. D., 1987, Aeroacoustic Analysis of Perforated muffler Components, Journal of Sound and Vibration, Vol. 114, No. 2, pp. 173-188. https://doi.org/10.1016/S0022-460X(87)80146-3
  6. Dokumaci, E., 1996, A Subsystem Approach for Acoustic Analysis of Mufflers Having Identical Perforatedpipes, Journal of Sound and Vibration, Vol. 193, No. 5, pp. 985-1001. https://doi.org/10.1006/jsvi.1996.0326
  7. Lee, J. W. and Kim, Y. Y., 2009, Topology Optimization of Muffler Internal Partitions for Improving Acoustical Attenuation Performance, International Journal for Numerical Methods in Engineering, Vol. 80, No. 4, pp. 455-477. https://doi.org/10.1002/nme.2645
  8. Lee, J. W. and Jang, G. W., 2012, Topology Design of Reactive Mufflers for Enhancing Their Acoustic Attenuation Performance and Flow Characteristics Simultaneously, International Journal for Numerical Methods in Engineering, Vol. 91, No. 5, pp. 552-570. https://doi.org/10.1002/nme.4329
  9. Lee, J. W. and Choi, D. W., 2012, Topology Optimization of Suction Muffler for Noise Attenuation, Proceedings of the International Compressor Engineering Conference at Purdue, pp. 1437-1-6.
  10. Hwang, Y. H., Lee, J. M. and Kim, S. J., 2002, New Active Muffler System Utilizing Destructive Interference by Difference of Transmission Paths, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 12, No. 5, pp. 374-379. https://doi.org/10.5050/KSNVN.2002.12.5.374
  11. Munjal, M. L., Behera, B. K. and Thawani, P. T., 1998, Transfer Matrix Model for the Reverse-flow, Three-duct, Open End Perforated Element Muffler, Applied Acoustics, Vol. 54, No. 3, pp. 229-238. https://doi.org/10.1016/S0003-682X(97)00077-7
  12. Chang, Y. C. and Chiu, M. C., 2008, Shape Optimization of One-chamber Perforated Plug/Non-plug Mufflers by Simulated Annealing Method, International Journal for Numerical Methods in Engineering, Vol. 74, No. 10, pp. 1592-1620. https://doi.org/10.1002/nme.2226
  13. Lee, S. H. and Ih, J. G., 2008, Effect of Non-uniform Perforation in the Long Concentric Resonator on Transmission Loss and Back Pressure, Journal of Sound and Vibration, Vol. 311, No. 1-2, pp. 280-296. https://doi.org/10.1016/j.jsv.2007.09.005
  14. Svanberg, K., 1987, The Method of Moving Asymptotes - A New Method For Structural Optimization, International Journal for Numerical Methods in Engineering, Vol. 24, No. 2, pp. 359-373. https://doi.org/10.1002/nme.1620240207