DOI QR코드

DOI QR Code

시험평가법을 이용한 IRB 면진장치 롤러 설계 : Part 2. 소재 열처리

Roller Design of IRB Seismic Isolation Device Using Test Evaluation : Part II. Heat Treatment of Material

  • 투고 : 2012.12.27
  • 심사 : 2013.02.05
  • 발행 : 2013.04.20

초록

This paper presents a subsequent research work on the roller design of IRB(isolation roller bearing) seismic isolation device presented in Part 1 by focusing on heat treatment. The hardness and friction factor are very important factors of material and after-treatment process selection. Normally, roller bearing consists of roller and retainer. The roller gets high pressure constantly, while the retainer gets tensile and compressive stress. Therefore, sensitive material selection and heat treatment of each part is quite important. In this experimental evaluation, carbon steel, chrome special steel and others are employed and their characteristics after heat treatment are identified. Each material is prepared by refining high frequency heat treatment. The friction factor and static load capacity of manufactured material are experimentally identified and destructive test of material is processed. Optimal material and heat treatment conditions for IRB roller bearing are determined based on experiment results.

키워드

참고문헌

  1. Lee, Y. K., Lee, S. H., Jung, I. K. and Cha, C. H., 2006, Bearing Vibration and Fatigue Life Analysis According to Fitting between Ball Bear and Housing with Geometrical Errors, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 16, No. 5, pp. 441-451. https://doi.org/10.5050/KSNVN.2006.16.5.441
  2. Yoon, D. J., Shin, J. H. and Choi, B. Y., 1994, Production of High - C Cr Bearing Steel with Excellent Resistance to Rolling Contact Fatigue by Heat Treatment, Journal of the Korean institute of metals and materials, Vol. 32, No. 3, pp. 329-335.
  3. Kim, H. J., 2009, A Study on Heat Treatment for Improving Cold Forge-ability of a Bearing Steel, SUJ2, Journal of the Korean Society of Manufacturing Process Engineers, Vol. 8, No. 1, pp. 24-30.
  4. Kim, N. S., Nam, K. W., Park, J. N., Ahn, S. H. and Kim, H. S., 2010, Wear Property of SACM645 Material with DLC Coating, Journal of Ocean Engineering and Technology, Vol. 24, No. 6, pp. 76-80.
  5. Ji, T. G., Koga, H., Misaka, Y., Kiyosawa, Y., Ikuta, F. and Kawasaki, K., 2011, Technical Materials : Recent Progress on Induction Heat Treatment Technology, Journal of the Korean Society for Heat Treatment, Vol. 24, No. 2, pp. 99-108.
  6. Kim, M. H., Rhee, K. Y., Paik, Y. N., Hong, J. S. and Ham, Y. S., A Study on the Wear Behavior of SPS5 Steel Surface-treated by Induction Hardening Method, Journal of the Korean Society for Precision Engineering, Vol. 23, No. 10, pp. 74-79.