DOI QR코드

DOI QR Code

결함 접지 구조를 이용한 주파수 스캐닝 방식의 마이크로파 태그 시스템

Frequency-Scanning Type Microwave Tag System Using Defected Ground Structures

  • 이석재 (순천향대학교 정보통신공학과) ;
  • 한상민 (순천향대학교 정보통신공학과)
  • Lee, Seok-Jae (Department of Information and Communication Engineering, Soonchunhyang University) ;
  • Han, Sang-Min (Department of Information and Communication Engineering, Soonchunhyang University)
  • 투고 : 2012.11.30
  • 심사 : 2013.02.04
  • 발행 : 2013.03.31

초록

본 논문에서는 결함 접지 구조를 갖는 다중 공진기를 이용하여 인식 코드를 생성한 주파수 스캔 방식의 마이크로파 태그 시스템을 제안하였다. 기존의 칩 기반 RFID가 시간 순차 비트에 의한 코드를 저장하였던 반면, 제안된 방식은 주파수에 따른 순차적 비트 인식을 공진기를 이용하여 구현함으로써 완벽한 수동 태그를 설계하였다. 또한, 공진기로 사용한 맴돌이형 결함 접지 구조는 전송선로의 후방 배치가 가능하여 리더 신호의 공진기 재방사에 의한 비트 오류를 줄일 수 있을 뿐만 아니라, 우수한 대역 저지 특성을 가지고 있다. 제안된 마이크로파 태그는 UWB 안테나와 함께 3~7 GHz 대역에서 설계되었으며, 무반향실 환경에서 다양한 5비트 코드의 인식 실험 결과 우수한 특성을 확인하였다.

In this paper, a microwave tag system of a frequency-scanning type is proposed with multi-resonators using defected ground structures. While a conventional chip-based RFID stores time-sequential codes, the proposed type achieves pure passive tags by using multi-resonant bits over a frequency range. Moreover, the resonators of the spiral defected ground structures implemented on the back side of transmission lines have advantages of the excellent bandstop characteristics as well as the bit-error avoidance by the re-radiation on normal resonators. The proposed microwave tag is designed with UWB antennas at 3~7 GHz. From the experimental results in an anechoic chamber, it has been verified of the excellent recognitions for various 5-bits identification codes.

키워드

참고문헌

  1. I. Jalaly, I. D. Robertson, "RF barcodes using multiple frequency bands", IEEE MTT-S Int. Microwave Symp. Dig., pp. 139-142, Jun. 2005.
  2. S. Preradovic, I. Balbin, and N. Karmakar, "Multiresonator-based chipless RFID system for low-cost item tracking", IEEE Trans. Microwave Theory Tech., vol. 57, no. 5, pp. 1411-1419, May 2009. https://doi.org/10.1109/TMTT.2009.2017323
  3. S. Preradovic, N. Karmakar, "Multiresonator based chipless RFID tag and dedicated RFID reader", IEEE MTT-S Int. Microwave Symp. Dig., pp. 1520- 1523, May 2011.
  4. S. Preradovic, N. Karmakar, and E. Amin, "Chipless RFID tag with integrated resistive and capacitive sensors", in Proc. Asia-Pacific Microw. Conf., pp. 1354-1357, Dec. 2011.
  5. 이석재, 최태민, 안달, 한상민, "결함 접지 구조를 이용한 다중 공진기 기반 Chipless RFID 시스템", 한국전자파학회 종합학술발표회 논문집, vol. 22, no. 1, p. 173, 2012년 11월.
  6. R. Koswatta, N. Karmakar, "A novel method of reading multi-resonator based chipless RFID tags using an UWB chirp signal", in Proc. Asia-Pacific Microw. Conf., pp. 1506-1509, Dec. 2011.
  7. A. Islam, S. Bhuiyan, and N. Karmakar, "A novel compact chipless RFID tag and near-field reader", in Proc. Asis-Pacific Microw. Conf., pp. 1518-1521, Dec. 2011.
  8. C. S. Kim, J. S. Lim, S. Nam, K. Y. Kang, and D. Ahn, "Equivalent circuit modeling of spiral defected ground structure for microstrip line", Electron. Lett., vol. 38, no. 19, pp. 1109-1110, Sep. 2002. https://doi.org/10.1049/el:20020742
  9. 한기웅, 김상호, 이석재, 이순흠, 안달, 한상민, "주파수 공진 비트를 이용한 Chipless RFID", 한국정보기술학회 추계종합학술대회논문집, vol. 11, no. 2, pp. 697-702, 2012년 11월.
  10. C. A. Balanis, Antenna Theory, 2nd Ed., Wiley & Sons, New York, 2001.