참고문헌
- Lee, K. Y. and Kwon, S. M., 1991, "Interlaminar Fracture Toughness for Composite Materials," Trans. Korean Soc. Mech. Eng., Vol. 15, No. 5, pp. 1486-1494.
- Yoon, S.-H. and Hong, C.-S., 1989, "Beam-Type specimen for Interminar Fracture Toughness of Laminate Composite Under Mixed Mode Deformations," Trans. Korean Soc. Mech. Eng., Vol. 13, No. 5, pp. 921-927.
- Hu, W., Han, I., Park, S.-C. and Choi, D.-H., 2012, "Multi-Objective Structural Optimization of a HAWT Composite Blade Based on Ultimate Limit State Analysis," Journal of Mechanical Science and Technology, Vol. 26, No. 1, pp. 129-135. https://doi.org/10.1007/s12206-011-1018-3
- Kim, J. K., Baillie, C., Poh, J. and Mai, Y. W., 1992, "Fracture Toughness of CFRP with Modified Epoxy Resin Materials," Composites Science Technology, Vol. 43, pp. 283-297. https://doi.org/10.1016/0266-3538(92)90099-O
- Odagiri, N., Kishi, H. and Yamashita, M., 1996, "Development of Torayca Prepreg P2302 Carbon Fiber Reinforced Plastic for Aircraft Primary Structural Materials," Advanced Composite Materials(in Japan), Vol. 5, pp. 249-252. https://doi.org/10.1163/156855196X00301
- Ozdil, F. and Carlsson, L. A., 1992, "Mode I Interlaminar Fracture of Interleaved Graphite/Epoxy," Journal of Material Science, Vol. 26, pp. 432-459.
- Ishai, O., Rosenthal, H., Sela, N. and Drukker, E., 1988, "Effect of Selective Adhesive Interleaving on Interlaminar Fracture Toughness of Graphite/Epoxy Composite Laminates," Composite(A), Vol. 19, pp. 49-54. https://doi.org/10.1016/0010-4361(88)90543-5
- Yamashita, S., Hatta, H., Takei, T. and Sugano, T., 1992, "Interlaminar Reinforcement of Laminated Composites by Addition of Orientated Whiskers in the Matrix," Journal of Composite Materials, Vol. 26, pp. 1254-1268. https://doi.org/10.1177/002199839202600902
- Mouritz, A. P., 2007, "Review of Z-pinned Composite Laminates," Composite: Part A, Vol. 38, pp. 2383-2397. https://doi.org/10.1016/j.compositesa.2007.08.016
- Choi, I. H., Ahn, S. M., Yeom, C. H., Hwang, I. H. and Lee, D. S., 2009, "Impact Resistance of Composite Laminates Manufactured by New z-Pinning Technique," The Korean Society for Aeronautical and Space Science, Vol. 37, pp. 693-700. https://doi.org/10.5139/JKSAS.2009.37.7.693
- Lee, B. H., Park. Y. B., Kweon, J. H., Choi, J. H., Choi, I. H. and Chang, S. T., 2012, "Strength of Stainless Steel Pin-reinforced Composite Single-lap Joints," The Korean Society for Composite Materials, Vol. 25, pp. 65-69. https://doi.org/10.7234/kscm.2012.25.3.065
- Lee, S. H., Noguchi, H., Kim, Y. B. and Cheong, S. K., 2002, "Effect of Interleaved Non-Woven Carbon Tissue on Interlaminar Fracture Toughness of Laminated Composites: Part I-Mode II," Journal of Composite Materials, Vol. 36, pp. 2153-2168. https://doi.org/10.1177/0021998302036018981
- Lee, S. H., Noguchi, H., Kim, Y. B. and Cheong, S. K., 2002, "Effect of Interleaved Non-Woven Carbon Tissue on Interlaminar Fracture Toughness of Laminated Composites: Part II-Mode I," Journal of Composite Materials, Vol. 36, pp. 2169-2181. https://doi.org/10.1177/0021998302036018980
- Lee, S. H., Noguchi, H. and Cheong, S. K., 2003, "Static Behavior Characteristics of Hybrid Composites with Non-Woven Carbon Tissue," Journal of Composite Materials, Vol. 37, pp. 233-252. https://doi.org/10.1177/0021998303037003424
- Lee, S. H., Noguchi, H. and Cheong, S. K., 2003, "Fatigue Behavior Characteristics of Hybrid Composites with Non-Woven Carbon Tissue," Journal of Composite Materials, Vol. 37, pp. 253-268. https://doi.org/10.1177/0021998303037003992
- Lee, S. H., Aono, Y., Noguchi, H. and Cheong, S. K., 2003, "Damage Mechanism of Hybrid Composites with Non-Woven Carbon Tissue Subjected to Quasi-Static Indentation Loads," Journal of Composite Materials, Vol. 37. pp. 333-349. https://doi.org/10.1177/0021998303037004334
- Lee, S. H., Aono, Y., Noguchi, H. and Cheong, S. K., 2004, "Residual Compressive Failure Characteristics of Hybrid Composites with Non-Woven Carbon Tissue after Indentation Damage," Journal of Composite Materials, Vol. 38, pp. 1461-1477. https://doi.org/10.1177/0021998304043744
- Lee, S. H., Lee, J. H., Cheong, S. K. and Noguchi, H., 2008, "A Toughening and Strengthening Technique of Hybrid Composites with Non-Woven Tissue," Journal of Materials Processing Technology, Vol. 207, pp. 21-29. https://doi.org/10.1016/j.jmatprotec.2007.12.047
- Cheong, S. K., 2001, "Effects of Non-woven Tissue on the Mechanical Behavior of Angle-ply Laminates," Transactions of the Korean Society of Machine Tool Engineers, Vol. 10, pp. 109-115
- Jeong, J. S., Lee, S. H. and Cheong, S. K., 2010, "Interlaminar Fracture Toughness of CFRP Composite Laminates With Carbon Non-Woven Tissue Under High and Low Temperature," The Korean Society for Composite Materials, pp. 222-225.
- Cheong, S. K., 2009, "Interlaminar Fracture Toughness of CFRP Laminates With Carbon Non-Woven Tissue Having Different Weight," The Korean Society for Composite Materials, pp. 43-48.
- ASTM D5528-01, 2007, Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites.